Search results for 'aem'
-
$0.00AEM's Plug & Play Engine Management System (EMS) plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. An integrated tuning wizard allows users to create a base map specifically for a car’s configuration, regardless of what type of injectors, sensors, coils or other changes have been made. The AEM EMS's infinitely adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.
- Installs in minutes using Plug & Play technology—no wiring necessary!
- Start-up calibrations included
- Live help window eases tuning process
- Set-up Wizard creates a custom base map for your car
- System is fully enabled—Never pay for upgrades!
- Free software updates on aempower.com
- Uses all the factory sensors
- Runs on Windows compatible software
- Fuel table automapping
- Programmable traction control
- Onboard 512kb datalogger
- Up to 10 cylinder sequential fuel injection
- 16 general-purpose outputs
- 7 definable switch inputs
- Electronic boost control
- Soft cut rev limiters
- Two step launch control
- Wet or dry nitrous control
- Definable knock control
- Full idle control
- 4 EGT inputs with fuel control
- 16/32 hybrid high speed processor
Fits EVO 9 see other model for EVO 8
Vehicle warranty and legality of use: Installing this performance part(s) on your vehicle may void the vehicles warranty may not meet your states legal requirements for use on public roads (emissions, noise etc – Please check your state law if uncertain). For more information on the sale of performance parts from this site, please read our Terms and Conditions.
Please note:All Prices are subject to change due to exchange rates & price alterations from suppliers.
Learn More
For more information please click here -
$0.00AEM’s external Peak & Hold Injector Driver module allows ECUÂ’s that have a saturated injector drive circuit to trigger low impedance injectors with a true 4/1 Peak & Hold injector drive circuit.
AEM’s Peak & Hold Injector Driver contains 10 independent injector drive channels. Each channel supplies full battery voltage to a fuel injector for rapid current rise; in order to produce positive injector opening. When load current reaches 4.1A (amps); the injector driver reduces the load current to 1.1A and operates as a constant current source. This condition holds the injector open; and reduces system power dissipation. If the current fails to reach 4.1A within 5mS; the driver module automatically reduces the load current to 1.1A.
Installation is straightforward. Users simply hook the injector trigger wires from an ECU to the module; and then hook the output wires from the module to your injectors. Any number of channels can be used from one to 10.- For high-output engines that have exceeded the capacity of high-impedance injectors
- Includes 10 independent injector drive channels for any engine up to V10
- Complete wiring system included
- Operating Voltage: 8-18 volts; negative ground
- RPM Capability: Unlimited
- Injector Triggers: 10
- Trigger Waveform: Output is activated when input trigger is grounded
- Trigger Impedance: 220 Ohm input impedance; pulled to 12V (60 mA draw)
- Injector Outputs: 10
- Output Current High: 4.15A Peak; Typical
- Output Current Low: 1.15A Sustain; Typical
- Peak Current Timeout: 5mS
- Size: 5.5"L x 4.6"W x 1.4"H
- Weight: 2.7 Lbs
- Over Temperature Shutdown: 115C (Nominal)
Please note:All Prices are subject to change due to exchange rates & price alterations from suppliers.
For more information please click here Learn More -
$0.00AEM’s 4-Channel K-Type Thermocouple Amplifier provides laboratory-grade accuracy for virtually any on-board temperature measurements. This unit utilizes low-cost K-Type thermocouple amplifiers to measure multiple engine system temperatures with better accuracy and faster response times than currently available temperature-measuring devices.
Unlike common single-channel gauges and amplifiers whose readings can vary up to 20? C from actual temperatures; AEM guarantees its 4-Channel K-Type Thermocouple Amplifier to read better than 1% full scale; even at the extremes of the temperature range! The unit achieves its laboratory-grade accuracy via a 100% surface-mounted PCB (printed circuit board) that has four differential temperature inputs fed into an A/D converter and fitted using a stage-three; eighth-order polynomial curve fit. The amplifier then compensates for this value using AEM’s on-board cold junction temperature measurement; and then sends the temperature outputs on feedback-monitored 0-5v analog outputs and an RS-232 serial data stream.
The 4-Channel K-Type Thermocouple Amplifier is ideal for users who want to accurately monitor multiple engine system temperatures; including water; air; coolant; fuel; disc brake and more. Multiple channels allow you to use each amp to simultaneously read different system temperatures (one channel for EGT; one channel for CLT; etc.). Users can utilize ANY K-Type thermocouple including commonly-available miniature thermocouple connectors; and datalog the readings via an RS-232 serial data stream. K-Type sensors sold separately.- Uses common miniature thermocouple connectors or ANY K-Type thermocouple
- On-board cold junction temperature compensation for laboratory-grade accuracy
- Includes FOUR (4) 0-5v analog outputs
- 0-1;000? C(32-1;832? F) measurement range
- Measures up to 20? C below cold junction temperature
- RS-232 serial port included for datalogging (programmable EMS not required)
- “Fault LEDs” indicate when a thermocouple is faulty
- High-quality Deutsch connector
- Mating harness included
Product pricing subject to change.
Please note:All Prices are subject to change due to exchange rates & price alterations from suppliers.
For more information please click here Learn More -
$0.00AEM High Volume Fuel Rail Kit. High quality black anodized aluminum rail. Fits all 2003-2006 EVO VIII and IX models.
Kit Includes:
- Fuel Rail
- Injector O-Rings
- Pipe Plug
- Detailed Instructions
Please note:All Prices are subject to change due to exchange rates & price alterations from suppliers.
For more information please click here Learn More -
$0.00AEM TRU-TIME Adjustable Cam Gears increase horsepower and torque without having to change the camshaft(s) and are must-have items for engines that are milled; forced induction; high compression and/or utilizing aftermarket competition cams. Our gears enable users to match cam timing with their vehicles tuning state by advancing or retarding the cam profile in one-degree increments via true laser-etched markings. Precision-cut gear teeth ensure no premature wearing of the belt surface and AEM's anodizing on the gear teeth is lab-test proven as the hardest anodizing process on the market.
AEM TRU-TIME Adjustable Cam Gears are available in a multi-spoke; five-bolt design for most vehicles and our classic full-faced; three-bolt design for select applications. Five-bolt cam gears have an 8 in the suffix (23-8XX); and three-bolt cam gears have a 6 in the suffix (23-6XX).
Increase horsepower and torque without any cam changes and are ideal for heavily modified engines
Grade-8; six-point hex bolts stand up to repeated adjustments and feature an integral washer flange for greater load distribution
True laser-etched markings on the leading edge of the gear allow for quick; accurate adjustments
Hard anodizing on belt surface is lab-tested as the most durable anodizing on the market
CNC-machined from 6061-T6 billet aluminum
Comprehensive installation instructions; recommended cam gear settings and decals included
Manufactured and assembled in the USA
For Off-Road use only
All AEM Tru-Time Adjustable Cam Gears are sold PER GEAR; DOHC Motors will need to buy Quantity: 2. Learn More -
$0.00AEM's Plug & Play Engine Management System (EMS) plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (2000; XP; NT; 98; 95; ME) makes the task of copying; viewing and manipulating data as simple as a click of the mouse. An integrated tuning wizard allows users to create a base map specifically for a car’s configuration; regardless of what type of injectors; sensors; coils or other changes have been made. The AEM EMS's infinitely adjustable software allows tuners to program virtually any combination of engine control; power adders and auxiliary devices; and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.- Installs in minutes using Plug & Play technology—no wiring necessary!
- Start-up calibrations included
- Live help window eases tuning process
- Set-up Wizard creates a custom base map for your car
- System is fully enabled—Never pay for upgrades!
- Free software updates on aempower.com
- Uses all the factory sensors
- Runs on Windows™ compatible software
- Fuel table automapping
- Programmable traction control
- Onboard 512kb datalogger
- Up to 10 cylinder sequential fuel injection
- 16 general-purpose outputs
- 7 definable switch inputs
- Electronic boost control
- Soft cut rev limiters
- Two step launch control
- Wet or dry nitrous control
- Definable knock control
- Full idle control
- 4 EGT inputs with fuel control
- 16/32 hybrid high speed processor
Fits EVO 8 see other model for EVO 9
Vehicle warranty and legality of use: Installing this performance part(s) on your vehicle may void the vehicles warranty may not meet your states legal requirements for use on public roads (emissions; noise etc – Please check your state law if uncertain). For more information on the sale of performance parts from this site; please read our Terms and Conditions.
Please note:All Prices are subject to change due to exchange rates & price alterations from suppliers.
For more information please click here Learn More