Mitsubishi Parts

The JRZ damper is an advanced development in high performance shock absorbers. The JRZ RS is a high gas pressure double adjustable twin tube damper. without the use of an external reservoir. Applying our race winning technology. JRZ designed the JRZ RS to give precise chassis control when driving on track and ultimate comfort for daily driving. Easy to install. the JRZ RS is available as a complete kit with mounting hardware and springs for all applications we support.  Following JRZ’s design philosophy. the JRZ RS has a large 22 mm diameter piston rod in strut applications and a 16 mm in aluminium damper applications. This means responsive chassis control at even the smallest suspension movements.  The large piston rod in combination with the high nitrogen gas pressure creates a lifting force giving great chassis control without using a high spring rate.  Our twin tube design uses a smaller diameter piston that gives a smooth feel during street driving. Working in conjunction with our blow off compression valving patterned from our racing dampers. the JRZ RS valving is the perfect marriage between daily driving and club racing.  To work with all ranges of spring and driver needs. the JRZ RS has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds.

Features

• 22mm piston rod
• Pre-set high gas pressure
• Piston developed for street and track
• Double adjustable
• 14 clicks compression
• 24 clicks rebound
• No canister
• Large adjustment range

These features culminate in the ultimate street and track damper. The JRZ RS is shipped as a bolt on kit with installation instructions and always comes with the personal service JRZ is known for.  Using the best materials. coatings and aerospace standard manufacturing processes; the JRZ RS is designed for long life. Unlike many clubsport dampers. the JRZ RS can be run for thousands of miles with no loss of performance or leakage.  Adjustment is easy to perform and comes with the knowledge basis only JRZ provides to its customers.

Benefits

• Easy installation
• Street ride. racing performance
• Long service life
• Applications available for prepared and stock class racing

Recommended applications

• Street/DE
• Club racing
• Prepared class racing

Learn More

JRZ Suspension Engineering is proud to offer our double adjustable racing damper. Our bespoke blow off valve compression system and racing piston design. implements our championship winning application of damping in an easy to use product. A wide adjustment range with precise. even adjustments engineered to enable the chassis tuner to make significant. predictable changes every time.

An easy to use system. the JRZ Double Adjustable enables the chassis tuner to achieve the desired ride and handling with uncontested precision. Digressive blow of allows for a stiff compression valving while maintaining smooth response. The result is a damper that provides ultra solid platform with smooth bump compliance. The JRZ standard large 22mm piston rod maximizes blow off valve responses to achieve solid chassis control without using a high spring rate. The mono tube design makes use of our standard motorsport piston. To customize track to track setups and tailor the chassis to the JRZ Double Adjustable has an adjustment range able to provide damping to spring configurations ranging from 1-4Hz.

The JRZ Double Adjustable takes you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. Valving designed and innovated by JRZ Suspension Engineering. The JRZ Double Adjustable Motorsport Damper is shipped as a custom configuration. always tailored to the customer’s needs. and always comes with our world renowned personal service

2 Way Double Adjustable Damper shock 2 way (double ajustable) shock Double Adjustable Damper absorbers for race. Double Adjustable Damper shock. 2 Way Double Adjustable Damper shock Damper road or Double Adjustable shock Damper rally car and vehicles. Suspension sets for BMW. Porshe. Mitsubishi. Nissan. car. 2. way. double. adjustable damper. shock. absorber. race. road. rally. car. vehicles. BMW. Porsche. Mitsubishi. Nissan

Benefits

• Precise control of the chassis and unsprung masses
• Pure racing valving
• Easy to change configurations

Recommended applications

• Professional racing mandating 2 way adjustment
• Experienced club racing

Learn More

JRZ Suspension Engineering is proud to offer our newest quadruple adjustable racing damper. the JRZ 14 31.  Building upon the years of success of our original quadruple adjustable. the 14 31 takes our damping philosophy to the next level.  Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant. predictable changes every time. Compression and rebound adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 14 31 have been redesigned to maximize efficiency and give crisp feel to the driver.  Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother.  To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available.  An easy to use system. the JRZ 14 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed blow off adjustment allows for highly tuneable mass control while maintaining smooth response and without losing traction. The low speed bleed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance.

Features:

• Rebound adjustment independent from compression
• Extra large adjustment range
• 12 clicks low speed compression
• 21 clicks high speed compression
• 8 clicks low speed rebound
• 15 clicks high

The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ 14 31 dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility.  Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.  Our newest motorsport piston has been developed to deliver a smooth and responsive damping characteristic.  To customize track to track setups and tailor the chassis to the driver; the JRZ 14 31 has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamics loads.  The JRZ 14 31 is here to take you to the next level. Dedicated racing cars with experienced drivers deserving of the professional technology JRZ delivers. With valving designed and innovated by JRZ Suspension Engineering. the JRZ 14 31 is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Easy to change damping curves
• Large adjustment range. with fine tuning ability

Learn More

JRZ Suspension Engineering is proud to offer our newest triple adjustable racing damper. the JRZ 12 31. Building upon the years of success of our original triple adjustable damper. the JRZ 12 31 takes our damping philosophy to the next level. Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant predictable changes every time. Compression adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 12 31 have been redesigned to maximize efficiency and give crisp feel to the driver. Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother. To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available. An easy to use system. the JRZ 12 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard large 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate.

Features

• Rebound adjustment independent from compression
• Extra large adjustment range
• 12 clicks low speed compression
• 21 clicks high speed compression
• 24 rebound • High response piston
• Precise canister
• Low friction
• Adjustable gas pressure

JRZ 12 31 dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility. Our newest motorsport piston has been developed to deliver a smooth and responsive damping characteristic.  To customize track to track setups and tailor the chassis to the driver; the JRZ 12 31 has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamic loads. Even with a large range. each adjustment is designed to be small. even steps giving precision and confidence when making changes. The JRZ 12 31 is here to take you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. With valving designed and innovated by JRZ Suspension Engineering. the JRZ 12 31 is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Easy to change damping curves
• Large adjustment range. with fine tuning ability

Learn More

For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More

For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More

For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More

For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More

For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More