Welcome to AQ Motorsports! Contact us at (310) 539 9010

Mitsubishi Parts

Grid List

Set Descending Direction

311-320 of 472

  1. K&N Typhoon System Cold Air MITSUBISHI LANCER EVOLUTION IX L4-2.0L TURBO 2006
    $297.99

    Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

     

    K&N Cool Air Intake Kit

    • Designed for increased performance for your sport compacts. utilizing the finest quality components
    • Guaranteed to Provide more horsepower and increased acceleration
    • Available in high-quality finishes
    • Includes K&N High-Flow. Washable/Reusable Air Filter
    • Some applications available in cold-air versions
    • Easy to Install
    • Million Mile Limited Warranty
    • Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

     


    Typhoon Cold Air Intake Kit
    Engine :-
    Aspiration :- T
    Vehicle Engine Options :- ALL
    Vehicle Interior Options :- L4 Aspiration: T
    Vehicle Exterior Options :- Fuel: FI-GAS
    Cylinder Type :-
    Vehicle Options :- Learn More
  2. K&N Typhoon Cold Air Intake Kit [Mitsubishi Lancer]
    $294.99

    Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

     

    K&N Cool Air Intake Kit

    • Designed for increased performance for your sport compacts. utilizing the finest quality components
    • Guaranteed to Provide more horsepower and increased acceleration
    • Available in high-quality finishes
    • Includes K&N High-Flow. Washable/Reusable Air Filter
    • Some applications available in cold-air versions
    • Easy to Install
    • Million Mile Limited Warranty
    • Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

     


    Typhoon Cold Air Intake Kit
    Engine :-
    Aspiration :- Naturally Aspirated
    Vehicle Engine Options :- 4B11
    Vehicle Interior Options :- L4 Aspiration: N
    Vehicle Exterior Options :- Fuel: FI-GAS
    Cylinder Type :-
    Vehicle Options :- Learn More
  3. K&N Typhoon Short Ram Intake Kit [Mitsubishi Lancer]
    $361.99

    Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

     

    K&N Cool Air Intake Kit

    • Designed for increased performance for your sport compacts. utilizing the finest quality components
    • Guaranteed to Provide more horsepower and increased acceleration
    • Available in high-quality finishes
    • Includes K&N High-Flow. Washable/Reusable Air Filter
    • Some applications available in cold-air versions
    • Easy to Install
    • Million Mile Limited Warranty
    • Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

     


    Typhoon Short Ram Intake Kit
    Engine :-
    Aspiration :- T
    Vehicle Engine Options :- ALL
    Vehicle Interior Options :- L4 Aspiration: T
    Vehicle Exterior Options :- Fuel: FI-GAS
    Cylinder Type :-
    Vehicle Options :- Learn More
  4. K&N Typhoon Short Ram Intake Kit [Mitsubishi Lancer]
    $416.99

    Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

     

    K&N Cool Air Intake Kit

    • Designed for increased performance for your sport compacts. utilizing the finest quality components
    • Guaranteed to Provide more horsepower and increased acceleration
    • Available in high-quality finishes
    • Includes K&N High-Flow. Washable/Reusable Air Filter
    • Some applications available in cold-air versions
    • Easy to Install
    • Million Mile Limited Warranty
    • Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

     


    Typhoon Short Ram Intake Kit
    Engine :-
    Aspiration :- T
    Vehicle Engine Options :- ALL
    Vehicle Interior Options :- L4 Aspiration: T
    Vehicle Exterior Options :- Fuel: FI-GAS
    Cylinder Type :-
    Vehicle Options :- Learn More
  5. K&N Typhoon Short Ram Intake Kit [Mitsubishi Lancer]
    $266.99

    Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

     

    K&N Cool Air Intake Kit

    • Designed for increased performance for your sport compacts. utilizing the finest quality components
    • Guaranteed to Provide more horsepower and increased acceleration
    • Available in high-quality finishes
    • Includes K&N High-Flow. Washable/Reusable Air Filter
    • Some applications available in cold-air versions
    • Easy to Install
    • Million Mile Limited Warranty
    • Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

     


    Typhoon Short Ram Intake Kit
    Engine :-
    Aspiration :- Naturally Aspirated
    Vehicle Engine Options :- 4G94.N/A
    Vehicle Interior Options :- L4 Aspiration: N
    Vehicle Exterior Options :- Fuel: FI-GAS
    Cylinder Type :-
    Vehicle Options :- Learn More
  6. K&N Typhoon Short Ram Intake Kit [Mitsubishi Lancer]
    $222.99

    Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

     

    K&N Cool Air Intake Kit

    • Designed for increased performance for your sport compacts. utilizing the finest quality components
    • Guaranteed to Provide more horsepower and increased acceleration
    • Available in high-quality finishes
    • Includes K&N High-Flow. Washable/Reusable Air Filter
    • Some applications available in cold-air versions
    • Easy to Install
    • Million Mile Limited Warranty
    • Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

     


    Typhoon Short Ram Intake Kit
    Engine :-
    Aspiration :- Naturally Aspirated
    Vehicle Engine Options :- 4G94.N/A
    Vehicle Interior Options :- L4 Aspiration: N
    Vehicle Exterior Options :- Fuel: FI-GAS
    Cylinder Type :-
    Vehicle Options :- Learn More
  7. Brian Crower BLOCK SLEEVES - Darton Dry Sleeve (Mitsubishi 4G63, 85mm to 86mm Max Bore)
    $478.95
    Brian Crower Block Sleeves are sourced from the leader in sleeving; Darton.. All sleeves are specifically chosen for maximum performance in your motor. Learn More
  8. Brian Crower PISTONS - CP Custom w/pins, rings and locks (Mitsubishi/DSM 4G63-Evo Stroker)
    $752.65
    SHELF PISTONS
    CP stocking pistons are made from premium 2618 aluminum forgings that are application specific. CP pistons feature CNC craftsmanship; made to only the highest tolerances; made using the highest quality materials. Each set includes pistons; 5100 series alloy wrist pins (9310 pin upgrade available for high HP use); ring pack with ductile iron plasma top rings; tapered second rings; low tension oil rings and spiral locks. Most shelf units are in stock and ready to ship.
    STROKER/CUSTOM PISTONS
    CP custom pistons are made to order with 2618 aluminum forgings that are application specific. Choose any desired bore size and compression ratio; as well as added features like 9310 alloy wrist pin upgrade (5100 series is standard); anti-detonation grooves; lateral and/or vertical gas ports; and chamfered pin boss. All customs include premium ring pack with ductile iron plasma top rings; tapered second rings; low tension oil rings and spiral locks. Learn More
  9. Brian Crower CONNECTING RODS - I BEAM w/ARP2000 Fasteners (Mitsubishi 4B11T - 5.656")
    $663.00
    Made from premium; 4340 steel billet material; Brian Crower connecting rods are available in two distinct styles depending on horsepower; budget and engine application; but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling.
    The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners.
    The BC625+ Series rods are designed for high horsepower; high boost and extreme rpm applications where nothing but the best rod will do. Features include ARPs premium Custom Age 625+ bolt rated to 280;000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long; reliable service; no matter what the boost; nits or RPM. Learn More
  10. Brian Crower CONNECTING RODS - SPORTSMAN w/ARP2000 Fasteners (Mitsubishi 4B11T - 5.656")
    $417.15
    Made from premium; 4340 steel billet material; Brian Crower connecting rods are available in two distinct styles depending on horsepower; budget and engine application; but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling.
    The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners.
    The BC625+ Series rods are designed for high horsepower; high boost and extreme rpm applications where nothing but the best rod will do. Features include ARPs premium Custom Age 625+ bolt rated to 280;000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long; reliable service; no matter what the boost; nits or RPM. Learn More

Grid List

Set Descending Direction

311-320 of 472