Search results for 'Evo x exhaust'
-
$899.00For: Mitsubishi Lancer YR: 2001-2007 Cyl: 4 App: 2.0L Turbo Evo 7-9
The FX200 System uses the Power Plus I Pressure Plate and a Steel Backed Kevlar disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque rating and holding capacity as the FX100, however, its life expectancy is increased with the Kevlar disc. Our Kevlar friction material is non-abrasive and doesn't score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer. Minimum 500 Required break in miles. Please see The Technical guide for more details Learn More -
$2,400.00For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More -
$605.00For: Mitsubishi Lancer YR: 1992-1995 Cyl: 4 App: 2.0L Turbo Evo 1-3
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More -
$16,343.00The Cosworth Subaru EJ25 CS600 series is designed extreme track use the demanding performance enthusiast. Each assembly is precision built by of Cosworths skilled craftsmen using finest components from parts catalog to ensure maximum reliable power performance. Starting with a Subaru EJ257 semi closed deck block; we meticulously hone each bore to guarantee perfect piston to cylinder wall clearance. block is then assembled with Forged Pistons; motorsport grade Forged H Beam connecting rods along with high performance and main bearings a STI Forged crankshaft. maximum performance; an optional steel billet crank is available (CS600X). Once cylinder block assembly is completed; we install a pair of CNC machine port-bored Valve Cylinder heads with proven S2 camshafts complete with valve lash to specifications. cylinder heads secured with high performance 11mm steel studs sealed with a Cosworth high performance stopper layer steel head gasket. Finally; we install of blue-printed; high pressure pumps maximum lubrication. This proven engine combination been used by teams to events in both North Americaand Europe.
Key Features
New Subaru EJ25 engine
New Subaru EJ25 Forged Crankshaft
Optional Billet Cosworth Crankshaft (CS600X)
Cosworth Forged H-beam Connecting Rods
Cosworth Forged Pistons rings
Cosworth motorsport Tri-metal bearings
Balanced to within gram
Complete blue-print assembly
Enlarged Intake Exhaust ports
Large diameter stainless steel intake valves
Large diameter Inconel exhaust valves
Hi Rev; Dual valve springs
Titanium Retainers
Hardened Steel spring platforms.
Multi angle valve job
CNC Machined port finish
Knife edge port divider
Cosworth S2 High lift camshafts
Valve lash set
Cosworth high pressure pump
Cam covers
Cosworth serial number Learn More -
$150.00Mishimoto Radiator Hose Kit
Mishimoto Radiator Hose Kits are made with a dual layer combining high grade silicone and Dupont Nomex technology to provide efficient heat reduction and increased pressure tolerance.
Mishimoto Radiator Hose Kits are a direct replacement for your OEM hoses and install in minutes without headache.
Specifications
Interior Color: Orange
Interior Material: Nomex
Exterior Color: Black/Blue/Orange/Red
Exterior Material: Silicone
Max Temperature: 330 F Learn More -
$2,400.00For: Mitsubishi Lancer YR: 1996-2000 Cyl: 4 App: 2.0L Turbo Evo 4-6
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More -
$950.00GReddy Exhaust Silent Force Revolution Learn More -
$265.00Mishimoto's developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly; Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components. Learn More -
$790.00For: Mitsubishi Lancer YR: 2001-2007 Cyl: 4 App: 2.0L Turbo Evo 7-9
The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for. Learn More -
$4,240.00For over 40 years; Cosworth's been leader in innovative multi valve cylinder head design both racing high performance production cars. Cosworth Ported Valve Cylinder head range is latest advancement. Modified from OE cylinder head castings; substantial flow improvements upgraded valve train components offer superior performance your high performance engine.
Each original cylinder head design is carefully evaluated tested to establish improvements required to meet target performance level. Hours of testing flow bench validation used to determine best advanced port design yielding maximum usable power response. However; there is more to cylinder head design than just maximum flow. It is critical that port velocits maintained to ensure drivability valve train components matched to guarantee reliable performance. Once of these factors have been tested validated; final port contour is digitized. Using digitized program; we then reshape both intake exhaust ports using axis mill producing an accurate consistent port shape every time. In addition to reshaping enlarging intake exhaust ports; most Valve Cylinder heads feature a re-shaped combustion chamber to un-shroud valves increasing flow performance. After machining; each cylinder head receives a multiangle high performance valve on precision valve seat cutter. Then each cylinder head is ultrasonically; cleaned; serialized then hand assembled with select high performance valve train components; ready to install on your engine.
Key Features
All OE Castings
Enlarged Intake Exhaust ports
Large diameter stainless steel intake valves
Large diameter Inconel exhaust valves
Hi Rev; Dual valve springs
Titanium Retainers
Hardened Steel spring platforms
Reshaped combustion chamber on most applications
Flow bench proven design
Dyno tested
Machined Cosworth Logo
Precision Multi angle valve job
Pre-assembled; ready to install
Machined port bore finish
Knife edge port divider Learn More