Search results for 'Subaru 2008 - 2010'

COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Mishimoto's developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly; Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components. Learn More

JRZ Suspension Engineering is proud to offer our newest quadruple adjustable racing damper. the JRZ 14 31.  Building upon the years of success of our original quadruple adjustable. the 14 31 takes our damping philosophy to the next level.  Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant. predictable changes every time. Compression and rebound adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 14 31 have been redesigned to maximize efficiency and give crisp feel to the driver.  Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother.  To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available.  An easy to use system. the JRZ 14 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed blow off adjustment allows for highly tuneable mass control while maintaining smooth response and without losing traction. The low speed bleed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance.

Features:

• Rebound adjustment independent from compression
• Extra large adjustment range
• 12 clicks low speed compression
• 21 clicks high speed compression
• 8 clicks low speed rebound
• 15 clicks high

The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ 14 31 dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility.  Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.  Our newest motorsport piston has been developed to deliver a smooth and responsive damping characteristic.  To customize track to track setups and tailor the chassis to the driver; the JRZ 14 31 has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamics loads.  The JRZ 14 31 is here to take you to the next level. Dedicated racing cars with experienced drivers deserving of the professional technology JRZ delivers. With valving designed and innovated by JRZ Suspension Engineering. the JRZ 14 31 is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Easy to change damping curves
• Large adjustment range. with fine tuning ability

Learn More

With Gates Timing Components Kits. you dont have to shop for additional tensioner & idler pulleys. buy from multiple sources or hassle with returning components that dont fit. Timing component kits provide a complete system replacement solution. plus detailed installation instructions for each application. There is no guesswork required getting the proper fit.
Each kit includes all the parts for a specific application:

Timing Belts
Tensioner Pulleys
Idlers
Installation Instructions
Now everything that goes into a complete timing system installation comes out of a single box.
Timing Belt Component Kit
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- N/A
Vehicle Interior Options :- H4 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-


Gates Timing Belt Component Kit [Subaru Legacy(1994-1996). Subaru Impreza(1994-1997)] Learn More

Essential high performance engine builds; heavy duty head studs reduce cylinder head movement in high boost or high compression engines optimizing cylinder head to block sealing. Cosworth Ultra High Performance Head Studs manufactured from tool steel with 260;000psi tensile strength come complete with nuts washers. Manufactured with broach for ease of installation. Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

For: Subaru BRZ YR: 2012-2013 Cyl: 4 App: 2.0L Eng 6-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

For: Subaru WRX YR: 2002-2005 Cyl: 4 App: 2.0L 242mm (2600#)
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

Brian Crower Spring and Retainers
Valvesprings
Designed for high rpm; Brian Crower valve springs are wound from only the highest grade; super clean; chrome silicone alloy and feature proprietary processing procedures (chamfer; debur; etc) for consistent pressures over long term; high rpm usage. Quality valve springs are critical in the prevention of premature valve float.
Retainers
The ultimate in lightweight high performance; Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances.
Spring/Retainer Kits
Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpms and allow for greater lift camshafts for added performance and reliability.
Keepers/Locks
Spring Seats Learn More