Search results for 'Evo x intake'
-
$548.00COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch KitThis assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$536.00COMPETITION CLUTCH
Stage 3 - Street/Strip Series 2600 Clutch KitThis segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life.
The 2600 Series kit includes a performance pressure plate; a high torque sprung disc with segmented Ceramic facings; all applicable bearings; and the appropriate alignment tool.
Learn More -
$360.00Mishimoto Performance Radiators
Whether you are a daily driver looking for an upgrade to your OEM radiator; or a racer looking for a dependable quality radiator; we have just what you are looking for! Mishimoto Performance Radiators are 100% brazed aluminum; ensuring a lasting lifetime of efficient cooling.
Mishimoto guarantees superior performance and quality with an unmatched lifetime warranty on all parts. Learn More -
$355.00COMPETITION CLUTCH
Stage 4 Sprung - Strip Series 1620 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1620 Series kit includes a performance pressure plate; a six puck high torque sprung disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$313.00Cosworths High Flow Intake Systems feature increased diameter; large smooth radius bent aluminum inlet tubes superior flow management coupled with a high flow filter maximum flow performance.
Each includes an integrated heat shield designed to isolate air intake from engine heat delivering cold into engine superior power conversion. filter element is large; conical in shape engineered to dramatically reduce intake restriction resulting in additional power torque.
Specs:
Increase in performance by typically up to 15%
Conical Cosworth blue filter with Cosworth embossed composite cap
Lightweight aluminum mandrel shaped inlet tube maximum airflow
Integrated heat shield cold isolation
Hardware included easy; perfect fit
Reusable filter
Manufactured in USA Learn More -
$2,400.00For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More -
$130.00Mishimoto Radiator Hose Kit
Mishimoto Radiator Hose Kits are made with a dual layer combining high grade silicone and Dupont Nomex technology to provide efficient heat reduction and increased pressure tolerance.
Mishimoto Radiator Hose Kits are a direct replacement for your OEM hoses and install in minutes without headache.
Specifications
Interior Color: Orange
Interior Material: Nomex
Exterior Color: Black/Blue/Orange/Red
Exterior Material: Silicone
Max Temperature: 330 F Learn More -
$675.00For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More -
$735.00For: Mitsubishi Lancer YR: 2001-2007 Cyl: 4 App: 2.0L Turbo Evo 7-9
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More -
$1,094.00The Cosworth Subaru High Volume Inlet Manifold is cast from aluminum featuring large tapered runners with radiused inlets improved flow. Plenum volume been substantially increased tuned power. Engineered easy installation is key to making power. Cosworth EJ257 plenum is designed use with 2004-2009 engines equipped with electronic throttle control. plenum is designed use with cable-actuated throttle body EJ20/25 applications. This plenum is designed to replace factory Subaru plenum in vehicles equipped with an aftermarket front-mounted intercooler (FMIC) kit. Throttle body position remains stock; ensuring fitment with brand FMIC kitsigned the stock throttle body intake manifold. 2008-2009 Subaru STIs Cosworth FMIC (p/n 20005378) is highly recommended.
Features
Substantially increased plenum volume
Large; tapered runners with radius inlets
Tuned plenum volume runner length/taper
Over increase in flow
Integral vacuum manifold connection of brake booster; boost gauge; sensor; boost controller; etc.
Will work with standard or forward mount electronic throttle body configurations
Stock throttle body location compatibility with most aftermarket FMIC kits Learn More
