Search results for 'Evo x intake'
-
$401.99Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles). Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.
- Designed for increased performance for your sport compacts. utilizing the finest quality components
- Guaranteed to Provide more horsepower and increased acceleration
- Available in high-quality finishes
- Includes K&N High-Flow. Washable/Reusable Air Filter
- Some applications available in cold-air versions
- Easy to Install
- Million Mile Limited Warranty
- Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)
Typhoon Complete Cold Air Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- ColorWrinkle Red Learn More -
$36.00Large diameter valves essential improved flow. Cosworth high performance intake valves produced from high quality stainless steel maximum durability. Exhaust valves machined from Inconel for
high temperature (2400 F) reliability. Each valve features swirl polished back improved flow dished face additional weight reduction. Cosworth high performance valves compatible with Cosworth Ultra
Race Valve Spring kits. Learn More -
$571.00COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$30.00Large diameter valves essential improved flow. Cosworth high performance intake valves produced from high quality stainless steel maximum durability. Exhaust valves machined from Inconel for
high temperature (2400 F) reliability. Each valve features swirl polished back improved flow dished face additional weight reduction. Cosworth high performance valves compatible with Cosworth Ultra
Race Valve Spring kits. Learn More -
$548.00COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$515.00For: Subaru Impreza RS YR: 1996-2005 Cyl: 4 App: 2.5L
The FX100 System uses the Power Plus I Pressure Plate with a custom heavy-duty Steel Back Organic friction disc. This clutch is engineered for heavy-duty street use. It is specifically designed for extended wear and additional clamping force for the enthusiast who has added an exhaust system, an intake system, up to 50hp NO2 upgrade, or other non-forced induction external bolt-ons. It features only slightly increased pedal pressure, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation. Learn More -
$355.00COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$1,300.00For: Mitsubishi Lancer YR: 1996-2000 Cyl: 4 App: 2.0L Turbo Evo 4-6
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More -
$855.00For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$565.00For: Mitsubishi Lancer YR: 1992-1995 Cyl: 4 App: 2.0L Turbo Evo 1-3
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More
