Search results for 'the'

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust; intake; blow-off valve and intercooler and adding more fuel and boost; but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit; you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles; and for many; we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application; kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates. Learn More

Front mounted intercoolers offer improved performance potential Subaru applications. Cosworth front mounted intercooler system the replaces restrictive; heat-soak prone original core. engineered system features an efficient large aluminum core with mandrel bent aluminum tubing maximum performance up to exceeding 600hp.The intercooler core is rubber mounted on a secure bracket system to help eliminate cracking breakage. Installation is simplified as no cutting of vehicle is required. />Features
Large efficient core in anodized black finish subtle appearance.
Large diameter mandrel bent aluminum tubing with fine texture gray powder coated finish.
4-ply heavy duty silicone coupling hoses.
Isolated mounting system.
Liner hose clamps.
No cutting or trimming of vehicle body required.
Comprehensive instruction manual.
Robust intercooler core mounting system Learn More

COMPETITION CLUTCH
Stage 5 Rigid - Strip Series 0420 Clutch Kit

This assembly; available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0420 Series kit includes a performance pressure plate; a four puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Mishimoto Racing Thermostats will promote greater cooling efficiency throughout your engine. The Mishimoto racing thermostat will significantly lower high engine temperature produced by modified and upgraded turbo applications. Once the engine is fully warmed up the Mishimoto racing thermostat will open up at a lower temperature than standard thermostats; also allowing the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures. Learn More

For: Mitsubishi Lancer YR: 2002-2003 Cyl: 4 App: 2.0L O-Z Rally
The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs. Learn More

JRZ Suspension Engineering is proud to offer our newest quadruple adjustable racing damper. the JRZ 14 31.  Building upon the years of success of our original quadruple adjustable. the 14 31 takes our damping philosophy to the next level.  Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant. predictable changes every time. Compression and rebound adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 14 31 have been redesigned to maximize efficiency and give crisp feel to the driver.  Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother.  To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available.  An easy to use system. the JRZ 14 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed blow off adjustment allows for highly tuneable mass control while maintaining smooth response and without losing traction. The low speed bleed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance.

Features:

• Rebound adjustment independent from compression
• Extra large adjustment range
• 12 clicks low speed compression
• 21 clicks high speed compression
• 8 clicks low speed rebound
• 15 clicks high

The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ 14 31 dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility.  Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.  Our newest motorsport piston has been developed to deliver a smooth and responsive damping characteristic.  To customize track to track setups and tailor the chassis to the driver; the JRZ 14 31 has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamics loads.  The JRZ 14 31 is here to take you to the next level. Dedicated racing cars with experienced drivers deserving of the professional technology JRZ delivers. With valving designed and innovated by JRZ Suspension Engineering. the JRZ 14 31 is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Easy to change damping curves
• Large adjustment range. with fine tuning ability

Learn More

Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

Designed for increased performance for your sport compacts. utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow. Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

 

Typhoon Short Ram Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205.EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

For full on competition use only; we now offer the turbo-back Comp Ti-C series. These are full race turbo applications which include a large racing dowpipe to replace the factory catalytic converters at the race track. The Comp Ti-C is for off-road use only. (usually 80mm) Learn More