Search results for 'I take'

Carrillo Connecting Rods are manufactured from a proprietary steel; manufactured and forged to custom specifications.
After experimenting with virtually every other reasonable material; Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors.
Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards.
When you go with Carrillo you go with quality.
Rods sold as a COMPLETE Matched Set. Learn More

For: Mitsubishi Lancer YR: 2002-2003 Cyl: 4 App: 2.0L O-Z Rally
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

JRZ Suspension Engineering is proud to offer our newest triple adjustable racing damper. the JRZ 12 31. Building upon the years of success of our original triple adjustable damper. the JRZ 12 31 takes our damping philosophy to the next level. Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant predictable changes every time. Compression adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 12 31 have been redesigned to maximize efficiency and give crisp feel to the driver. Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother. To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available. An easy to use system. the JRZ 12 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard large 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate.

Features

• Rebound adjustment independent from compression
• Extra large adjustment range
• 12 clicks low speed compression
• 21 clicks high speed compression
• 24 rebound • High response piston
• Precise canister
• Low friction
• Adjustable gas pressure

JRZ 12 31 dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility. Our newest motorsport piston has been developed to deliver a smooth and responsive damping characteristic.  To customize track to track setups and tailor the chassis to the driver; the JRZ 12 31 has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamic loads. Even with a large range. each adjustment is designed to be small. even steps giving precision and confidence when making changes. The JRZ 12 31 is here to take you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. With valving designed and innovated by JRZ Suspension Engineering. the JRZ 12 31 is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Easy to change damping curves
• Large adjustment range. with fine tuning ability

Learn More

Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

Designed for increased performance for your sport compacts. utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow. Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

 

Typhoon Short Ram Intake Kit
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- 4G94.N/A
Vehicle Interior Options :- L4 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

With Gates Timing Components Kits. you dont have to shop for additional tensioner & idler pulleys. buy from multiple sources or hassle with returning components that dont fit. Timing component kits provide a complete system replacement solution. plus detailed installation instructions for each application. There is no guesswork required getting the proper fit.
Each kit includes all the parts for a specific application:

Timing Belts
Tensioner Pulleys
Idlers
Installation Instructions
Now everything that goes into a complete timing system installation comes out of a single box.
Timing Belt Component Kit
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- 4G94
Vehicle Interior Options :- L4 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-


Learn More

Cosworth High Valve Springs the result of countless hours of engineering; testing validation ensuring best possible spring high performance applications. Cosworth High Valve Springs wound from worlds finest Japanese Kobe steel feature dual chamfered ends to reduce wear on seats retainers. Each spring been engineered with increased seat pressure along with higher lift capability optimum performance potential improved valve control. Single spring design allows easy installation with no machining required is perfect typical high performance use. />Key Features
Manufactured from finest Japanese Kobe Steel
Single spring design easy installation
Dual chamfered ends
Increased performance Learn More

COMPETITION CLUTCH
Stage 2 - Street Series 2100 Clutch Kit

This assembly provides up to 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300 mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).

The 2100 Series kit includes a performance pressure plate; a high torque sprung disc with antiburst steel backed Brass Plus facings; all applicable bearings; and the appropriate alignment tool.

Learn More

For over 40 years; Cosworth's been leader in innovative multi valve cylinder head design both racing high performance production cars. Cosworth Ported Valve Cylinder head range is latest advancement. Modified from OE cylinder head castings; substantial flow improvements upgraded valve train components offer superior performance your high performance engine.
Each original cylinder head design is carefully evaluated tested to establish improvements required to meet target performance level. Hours of testing flow bench validation used to determine best advanced port design yielding maximum usable power response. However; there is more to cylinder head design than just maximum flow. It is critical that port velocits maintained to ensure drivability valve train components matched to guarantee reliable performance. Once of these factors have been tested validated; final port contour is digitized. Using digitized program; we then reshape both intake exhaust ports using axis mill producing an accurate consistent port shape every time. In addition to reshaping enlarging intake exhaust ports; most Valve Cylinder heads feature a re-shaped combustion chamber to un-shroud valves increasing flow performance. After machining; each cylinder head receives a multiangle high performance valve on precision valve seat cutter. Then each cylinder head is ultrasonically; cleaned; serialized then hand assembled with select high performance valve train components; ready to install on your engine.
Key Features
All OE Castings
Enlarged Intake Exhaust ports
Large diameter stainless steel intake valves
Large diameter Inconel exhaust valves
Hi Rev; Dual valve springs
Titanium Retainers
Hardened Steel spring platforms
Reshaped combustion chamber on most applications
Flow bench proven design
Dyno tested
Machined Cosworth Logo
Precision Multi angle valve job
Pre-assembled; ready to install
Machined port bore finish
Knife edge port divider Learn More

For: Mitsubishi Lancer YR: 1992-1995 Cyl: 4 App: 2.0L Turbo Evo 1-3
The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for. Learn More