Search results for 'turbo'
-
$715.00GReddy Racing Ti-C Cat-back Exhausts combine the design; looks and flow of our Full Racing Titanium systems with the durability; deep sound; value and large application list of our other Stainless Steel street systems. This fusion of aggressive styling and practical construction; makes this the logical choice for both Race and Street Enthusiasts. The systems are comprised of a Titanium heat-treated tip; polished stainless steel muffler; unpolished stainless steel piping. It improves high and mid-range performance while still allowing for suitable sound levels when used with the included tuned Tri-mounted Silencer*. *Most applications below 92db; with all under 94db. The large list of applications include 80mm piping for Turbo applications and 50-60-70mm for Normally Aspirated vehicles. (usually 60mm) Learn More -
$950.00For full on competition use only; we now offer the turbo-back Comp Ti-C series. These are full race turbo applications which include a large racing dowpipe to replace the factory catalytic converters at the race track. The Comp Ti-C is for off-road use only. (usually 80mm) Learn More -
$850.00For full on competition use only; we now offer the turbo-back Comp Ti-C series. These are full race turbo applications which include a large racing dowpipe to replace the factory catalytic converters at the race track. The Comp Ti-C is for off-road use only. (usually 80mm) Learn More -
$112.95Gates Timing Belt Pulley
Timing Belt Pulley
Engine :-
Aspiration :- Naturally Aspirated!T
Vehicle Engine Options :- EJ253.EJ255
Vehicle Interior Options :- H4 Aspiration: N!T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Position: Bottom Left
Learn More -
$85.65Gates Timing Belt Pulley
Timing Belt Pulley
Engine :-
Aspiration :- Naturally Aspirated!T
Vehicle Engine Options :- EJ253.EJ255
Vehicle Interior Options :- H4 Aspiration: N!T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Position: Right
Learn More -
$1,078.32Complete Set of Pistons
Bore : 86.5mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -6.2
Gram Weight : 324
Head CC : 50.5
Oversized : 0.5
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm
JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3405
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86.5mm - C/D33.35mm - Comp Ratio9.0:1 - Dome C
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More -
$1,078.32Complete Set of Pistons
Bore : 86mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -5.0
Gram Weight : 320
Head CC : 50.5
Oversized : STD
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm
JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3386
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86mm - C/D33.35mm - Comp Ratio9.0:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More -
$1,088.44Complete Set of Pistons
Bore : 100mm
C/D : 28.7mm
Comp Ratio : 8.5:1
Dome CC : -21.5
Gram Weight : 404
Head CC : 57.0
Oversized : 0.50
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 83mm
JE Time Attack FSR Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JC4404-3938
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore100mm - C/D28.7mm - Comp Ratio8.5:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More -
$1,088.44Complete Set of Pistons
Bore : 99.5mm
C/D : 28.7mm
Comp Ratio : 8.5:1
Dome CC : -21.5
Gram Weight : 398
Head CC : 57.0
Oversized : STD
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 83mm
JE Time Attack FSR Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JC3104-3917
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore99.5mm - C/D28.7mm - Comp Ratio8.5:1 - Dome CC
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More -
$1,088.44Complete Set of Pistons
Bore : 100mm
C/D : 30.7mm
Comp Ratio : 8.5:1
Dome CC : -17.3
Gram Weight : N/A
Head CC : 57.0
Oversized : 0.50
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 79mm
JE Time Attack FSR Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JC4404-3938
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore100mm - C/D30.7mm - Comp Ratio8.5:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More