Search results for 'Evo x exhaust'

Cosworth's been engineering camshafts nearly 50 years. That coupled with years of innovative multi valve cylinder head design ensures camshaft designs the most efficient in providing maximum usable power across widest power band. Each is ground from a billet finished using same procedures we in extreme level race engines. Cosworth camshafts the perfect compliment to CNC Ported Valve Cylinder heads. cams profiled to increase boost response thereby increasing engine torque power are fully compatible with CNC Ported Valve Cylinder Heads.
Key Features
Ground from billets
Engineered tested profiles
Broad power band
Compatible with Cosworth ported Valve Cylinder Heads Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Manufactured in UK; Cosworth brake pads feature a 1.5mm granulated inter-layer which only serves to as a shock absorber; helping to reduce stress on rotor surface triples bonding strength; diminishing edge lifting. To reduce bedding-in or seating-in time this is time it takes the and disc to adapt to each other Cosworth brake pads heat seared. This process heats friction material in excess of degrees toasting surface; greatly enhancing performance first time that driver applies brakes. Scorching pads also significantly reduces initial fading fading increases necessary force pressure required to maintain deceleration of vehicle. Cosworths brake range offers exceptional performance without compromise.
Specs:
Superior bite from cold
Silent running technology
Fade resistant
Premium grade friction material
Consistent & predictable braking patterns
Medium-hard sports suitable heavy duty/fast road
ECE approval
Superior bite Mu friction coefficient virtually from first pedal
Strong brake effect up to degrees C
Chamfered edge to avoid lifting
Fitted with premium quality shim hardware silent braking
Durability factor with minimal rotor abrasion
Produces consistent; predictable braking performance Learn More

Mishimoto Plastic Replacement Radiators. Learn More

For: Subaru WRX Sti YR: 2004-2011 Cyl: 4 App: 2.5L Turbo 6-SHPeed
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More

For: Subaru WRX YR: 2006-2011 Cyl: 4 App: 2.5L Turbo 5-SHPeed
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More

Complete Set of Pistons
Bore : 86mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -5.0
Gram Weight : 320
Head CC : 50.5
Oversized : STD
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm

JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3386
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86mm - C/D33.35mm - Comp Ratio9.0:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More