Search results for 'brake it'

For: Mitsubishi Lancer YR: 2002-2003 Cyl: 4 App: 2.0L O-Z Rally
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

JRZ Suspension is proud to offer our Triple Adjustable racing damper. Advancing the design of our Double Adjustable further. the JRZ Triple Adjustable utilizes the same piston design while adding function to the Triple Adjustable canister. Like the Double Adjustable. the Triple Adjustable has a wide adjustment range with precise. even adjustments engineered to enable the chassis tuner to make significant. predictable changes every time.

Compression adjustments are separated into the high speed and low speed piston velocity ranges. This level of adjustment creates an environment for precise tuning. The mono tube Triple Adjustable Damper offers a wide adjustment range allowing the user to tailor the damper to driver. track and vehicle. The JRZ Triple Adjustable Damper is available as a complete kit with springs and mounting hardware. Custom applications are available.

An easy to use system. the Triple Adjustable Damper enables the chassis tuner to achieve the desired mass control and handling with precision.  Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction.
The JRZ standard large 22mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ Triple Adjustable dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility. Our proven piston has been developed to deliver a smooth and responsive damping characteristic. To customize track to tracks setups and tailor the chassis to the driver; the JRZ Triple Adjustable Damper has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamic loads. Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.

Features

• Large adjustment range
• 6 clicks low speed compression
• 14 clicks high speed compression
• 24 clicks rebound
• High response piston
• Precise canister
• Adjustable gas pressure

The JRZ Triple Adjustable takes you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. Valving designed and innovated by JRZ Suspension Engineering. the JRZ Triple Adjustable is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Excellent tyre wear 
• Easy to change configurations

Recommended applications

• Professional racing mandating 3 way adjustment
• Experienced club racing

Learn More

Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

Designed for increased performance for your sport compacts. utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow. Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

 

Typhoon Cold Air Intake Kit
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- 4B11
Vehicle Interior Options :- L4 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

For full on competition use only; we now offer the turbo-back Comp Ti-C series. These are full race turbo applications which include a large racing dowpipe to replace the factory catalytic converters at the race track. The Comp Ti-C is for off-road use only. (usually 80mm) Learn More

The connecting is vital link between piston power. When engine output is increased; demands placed on connecting increase as well. To ensure engine reliability in condits; original connecting rods should be replaced with heavy duty specification parts. Cosworth Forged Connecting Rods manufactured from high strength 4340 (EN24) steel machined to exacting tolerances.
Key Features
Strong; light weight H-beam design
Heavy duty bolt (260;000psi)
Manufactured from 4340 (EN24) steel
Small bushed floating pin Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Mishimoto's developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly; Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components. Learn More

For: Mitsubishi Lancer YR: 1992-1995 Cyl: 4 App: 2.0L Turbo Evo 1-3
The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs. Learn More

For: Subaru BRZ YR: 2012-2013 Cyl: 4 App: 2.0L Eng 6-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More