Search results for 'I take'

The Cosworth ECPro is a higher performance solution engine management. Engineered in conjunction with Pectel Control Systems; Cosworth ECPro features an compatible harness connector a full base calibration allowing to go straight to dyno without workload of full and vehicle configuration.
The Cosworth ECPro is perfect demanding applications such as track day; rally motorsport and is housed in a machined from solid aluminum case with professional motorsport specification electronics. />Features
Designed full harness system integration Plug Perform. Base calibration supplied to a stock engine. There is no need replacement of wiring harness or sensors. Makes of dash diff controller
56Mhz processor. Higher performance timing accuracy control Ethernet comms Fast data offload high quality data viewing on PC
Internal logging memory. configured logging channel configuration at optimum rates performance analysis by your dealer. User define specific logging configurations. on board internal memory up to 2;000Hz of logging bandwidth is standard.
Knock monitoring Control. Advanced knock processing chip offers industry leading advanced knock signal filtration signal processing. MIL lamp indication of Detonation levels (witser defined levels based on and Boost).
Calibration select. (e.g. Fuel save; Test; Race) of OEM SI Drive switch selection of 3 alternate calibrations (calibration selectable boost; fuelling; ignition;rev limit; setting; VCAM target; Fly-By-Wire pedal mapping; overrun fuelling cut-off individually selectable Intelligent; Sports; Sports-Sharp).
Pectel (Anti System) switch (cruise control button) used ALS mode select.
Analog Inputs external sensors. Additional pressure transducers; temperature sensors; digital inputs be wired into EC for logging additional engine parameters and/or additional control strategies. number of analog inputs depends on specific model.
Closed Loop Boost Control. Full closed loop or open loop boost control PID parameters solenoid duty cycle map. Closed loop boost levels also selectable calibration select (see above).
Standard Motorsport Design. Machined billet aluminum case professional motorsports specification electronics.
OEM Narrow Band Supported be disabled by user.
External Wideband Supported. Compatible with wideband units with 0-5v analog output.
Internal Wideband Supported. kit Requires Cosworth by Pectel sensor; requires 3 extra populations 2 relocating. blank pins on harness populating.
Variable CAM. Pre-configured full quad camshaft support />External Comms Support. Optional Motorsport dash center differential controller.
Designed Racing OBDII Motorsport us Learn More

COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Mishimoto's developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly; Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components. Learn More

For: Mitsubishi Lancer YR: 2001-2007 Cyl: 4 App: 2.0L Turbo Evo 7-9
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More

JRZ Suspension Engineering is proud to introduce the JRZ RS1. a revolutionary development in multipurpose high performance damping. Applying our race winning technology. JRZ designed the JRZ RS1 to give ultimate comfort for public roads and precise chassis control when driving on track.
 
The JRZ RS1 is a high gas pressure. single adjustable monotube damper. The canister has been designed inside of the damper. JRZ inner canister technology gives the advantages of monotube canister dampers without the mounting concerns and complexity. Easy to install. the JRZ RS1 is available as a complete kit with mounting hardware and springs for all applications we support.Built on the same roduction line and sharing components with our pro racing applications. the JRZ RS1 is of true professional heritage. Following JRZ’s design philosophy. the JRZ RS1 has a large 22mm diameter piston rod in strut applications and a 16mm diameter piston rod in aluminium damper applications. The large piston rod magnifies the high pressure gas charge which means great chassis control without using a high spring rate or increasing harshness. 
Features

• 22 mm rod strut. 16 mm rod damper
• 24 clicks of rebound
• Adjustable gas pressure. mono tube
• Piston designed for high performance
• Large adjustment range

Utilizing a mono tube design with a high flow piston ensures the smoothest possible ride in normal conditions while the bleed adjustment gives the ability to tune for racing situations. Unlike many other single adjustable suspensions. damping balance is carefully maintained between compression and rebound. This damping balance is critical to maintaining tire contact with the road in addition to controlling the main mass of the vehicle. To satisfy the diverse needs of each driver’s application. the JRZ RS1 has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds. JRZ has designed the JRZ RS1 to give the end user the best possible damper to drive daily. while maintaining the racetrack performance that wins championships. The JRZ RS1 is shipped as a bolt-on kit and always comes with the personal support JRZ is known for. Using the best materials. coatings and aerospace standard manufacturing processes as in our motorsport line; the JRZ RS1 is designed to perform flawlessly. Adjustment is easy to perform and comes with the knowledge base only JRZ provides to his customers.
 
Benefits

• Easy to use and bolt-in
• Street ride. racing performance
• Extra long product life
• One adjustment for complete control of ride and handling
• Professional racing quality

Recommended applications

• Daily driving
• Drivers education (DE) events and track days
• Club racing

Learn More

Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Doors are designed to replace your factory doors and accept all hinges. handles. glass and locks for 100% Bolt On fitment. Cut weight in style with Seibon Doors.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionFront
Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionFront Learn More