Search results for 'I take'

For: Subaru WRX Sti YR: 2004-2011 Cyl: 4 App: 2.5L Turbo 6-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

For: Subaru Forester YR: 2004-2005 Cyl: 4 App: 2.5L 5-SHPeed Turbo
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More

Complete Set of Pistons
Bore : 100mm
C/D : 30.7mm
Comp Ratio : 8.5:1
Dome CC : -26.1
Gram Weight : 423
Head CC : 48
Oversized : 0.5mm
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 79mm
For EJ257 Block w/EJ20 Head
JE Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Recommended RingSet: JC4404-3938
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Bore100mm - C/D30.7mm - Comp Ratio8.5:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

For over 40 years; Cosworth's been leader in innovative multi valve cylinder head design both racing high performance production cars. Cosworth Ported Valve Cylinder head range is latest advancement. Modified from OE cylinder head castings; substantial flow improvements upgraded valve train components offer superior performance your high performance engine.
Each original cylinder head design is carefully evaluated tested to establish improvements required to meet target performance level. Hours of testing flow bench validation used to determine best advanced port design yielding maximum usable power response. However; there is more to cylinder head design than just maximum flow. It is critical that port velocits maintained to ensure drivability valve train components matched to guarantee reliable performance. Once of these factors have been tested validated; final port contour is digitized. Using digitized program; we then reshape both intake exhaust ports using axis mill producing an accurate consistent port shape every time. In addition to reshaping enlarging intake exhaust ports; most Valve Cylinder heads feature a re-shaped combustion chamber to un-shroud valves increasing flow performance. After machining; each cylinder head receives a multiangle high performance valve on precision valve seat cutter. Then each cylinder head is ultrasonically; cleaned; serialized then hand assembled with select high performance valve train components; ready to install on your engine.
Key Features
All OE Castings
Enlarged Intake Exhaust ports
Large diameter stainless steel intake valves
Large diameter Inconel exhaust valves
Hi Rev; Dual valve springs
Titanium Retainers
Hardened Steel spring platforms
Reshaped combustion chamber on most applications
Flow bench proven design
Dyno tested
Machined Cosworth Logo
Precision Multi angle valve job
Pre-assembled; ready to install
Machined port bore finish
Knife edge port divider Learn More

The Cosworth Pitstop Mount reduces engine transmission flex transfers more power to ground. During hard acceleration deceleration transmission experience movement; Cosworth Pitstop Mount greatly reduces this. Learn More

COMPETITION CLUTCH
Stage 4 Sprung - Strip Series 1620 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1620 Series kit includes a performance pressure plate; a six puck high torque sprung disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Engine bearings one of most vital components within an engine are often overlooked when considering high performance upgrades. Performance engineered; multi-layer bearings generate less heat than normal bearings by reducing friction. Cosworth Race bearing sets feature a unique combination of design; metallurgy engineering to deliver performance in extreme condits. Cosworth Race bearings setsare available in sizes to accommodate most applications. Size 1 bearings a nominal standard size are used most applications. Size 2 bearings feature an additional .001 clearance should be used
when extra clearance is required.
Key Features
High strength overlay plate with reduced thickness better control less friction
Hardened steel backing on connecting bearings
Increased crush better retention
3/4 grooving on Main Bearings providing optimum supply
Tight consistent wall tolerances
Oversize chamfers where applicable
Flash plating eliminated improved heat transfer
Tested to over 1000 horsepower! Learn More

For: Subaru WRX YR: 2002-2005 Cyl: 4 App: 2.0L Turbo 5-SHPeed
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More

For: Subaru WRX YR: 2002-2005 Cyl: 4 App: 2.0L Turbo 5-SHPeed
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More