Search results for 'I take'
-
$799.00For: Subaru Baja YR: 2004-2006 Cyl: 4 App: 2.5L 5-SHPeed Turbo
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More -
![JE Pistons - Subaru Forester 2.5 XT YR: 2005-2010 [PN# 291062] SUB STI EJ257 8.5KIT](http://www.aqmotorsports.com/media/catalog/product/cache/1/small_image/300x/17f82f742ffe127f42dca9de82fb58b1/7/4/7430ad8c-7fa6-4497-8e74-deef04002157_4.jpg)
$1,088.44Complete Set of Pistons
Bore : 100mm
C/D : 30.7mm
Comp Ratio : 8.5:1
Dome CC : -17.3
Gram Weight : N/A
Head CC : 57.0
Oversized : 0.50
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 79mm
JE Time Attack FSR Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JC4404-3938
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore100mm - C/D30.7mm - Comp Ratio8.5:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More -
$122.00Cosworth High Performance Head Gaskets engineered to seal in power under most demanding condits. Constructed from stainless steel with a folded stopper layer; each application features superior sealing compared to conventional multi layer steel gaskets. Additionally; Cosworth High Performance Head Gaskets manufactured from pre-coated cut stainless steel resulting in uniform coating distribution consistent shape.
Key Features
Individual cut layers of stainless steel with superior consistency compared to laser gaskets
Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or areas
Manufacturing dimensional tolerance of 0.001
Die manufacturing process ensures smooth edges; unlike laser gaskets
Cosworth's gaskets feature a folded stopper layer additional torque around each cylinder. width of sealing area is specific each application thereby providing ultimate sealing properties
Available in a range of thicknesses specific applications Learn More -
$521.00COMPETITION CLUTCH
Stage 5 Rigid - Strip Series 0420 Clutch KitThis assembly; available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0420 Series kit includes a performance pressure plate; a four puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$524.00COMPETITION CLUTCH
Stage 2 - Street Series 2100 Clutch KitThis assembly provides up to 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300 mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).
The 2100 Series kit includes a performance pressure plate; a high torque sprung disc with antiburst steel backed Brass Plus facings; all applicable bearings; and the appropriate alignment tool.
Learn More -
$25.00Engine bearings one of most vital components within an engine are often overlooked when considering high performance upgrades. Performance engineered; multi-layer bearings generate less heat than normal bearings by reducing friction. Cosworth Race bearing sets feature a unique combination of design; metallurgy engineering to deliver performance in extreme condits. Cosworth Race bearings setsare available in sizes to accommodate most applications. Size 1 bearings a nominal standard size are used most applications. Size 2 bearings feature an additional .001 clearance should be used
when extra clearance is required.
Key Features
High strength overlay plate with reduced thickness better control less friction
Hardened steel backing on connecting bearings
Increased crush better retention
3/4 grooving on Main Bearings providing optimum supply
Tight consistent wall tolerances
Oversize chamfers where applicable
Flash plating eliminated improved heat transfer
Tested to over 1000 horsepower! Learn More -
$745.00For: Subaru WRX YR: 2002-2005 Cyl: 4 App: 2.0L Turbo 5-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$825.00For: Subaru WRX Sti YR: 2004-2011 Cyl: 4 App: 2.5L Turbo 6-SHPeed
The FX200 System uses the Power Plus I Pressure Plate and a Steel Backed Kevlar disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque rating and holding capacity as the FX100, however, its life expectancy is increased with the Kevlar disc. Our Kevlar friction material is non-abrasive and doesn't score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer. Minimum 500 Required break in miles. Please see The Technical guide for more details Learn More -
$400.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hood Scoops are designed to replace your factory hood scoop for 100% Bolt On fitment. Add those extra style points to your ride with a SEIBON Carbon Fiber Hood Scoop.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood Scoop
STI Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood Scoop
STI Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Learn More -
$164.00Cosworth High Performance Head Gaskets engineered to seal in power under most demanding condits. Constructed from stainless steel with a folded stopper layer; each application features superior sealing compared to conventional multi layer steel gaskets. Additionally; Cosworth High Performance Head Gaskets manufactured from pre-coated cut stainless steel resulting in uniform coating distribution consistent shape.
Key Features
Individual cut layers of stainless steel with superior consistency compared to laser gaskets
Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or areas
Manufacturing dimensional tolerance of 0.001
Die manufacturing process ensures smooth edges; unlike laser gaskets
Cosworth's gaskets feature a folded stopper layer additional torque around each cylinder. width of sealing area is specific each application thereby providing ultimate sealing properties
Available in a range of thicknesses specific applications Learn More