Search results for: 'boost'

GReddy Type RZ BOV Kit; Includes Adapter & Recirculation Tube; Reciruclates Back Into Air Intake Or Open w/ Included Parts

$450.00

GReddy Blow Off Valves are easily adjustable to eliminate compressor surge and preventing premature boost leakage; while increasing boost response between shifts. Each valve is made of durable cast and billet aluminum frame and the valve to diaphragm ratio provides performance that cheap piston types cannot offer. The spring stiffness adjustment screw and the three different sizes give the GReddy user the option to match vehicles with mild upgrades to heavily tuned engines. There are many factors in matching a blow-off valve to an application; valve location; turbocharger size and pressure; but as a general rule of thumb; we recommend the Type RS for 100-400hp. Also available in easy to install kit form for many turbocharged vehicles.
The Type RZ Blow Off Vale; is identical to the Type RS except for the fact that the RZ is a special limited edition color. Learn More

GReddy T/K WRX GDB/GGB T67 25G-8CM R0.8

$4,775.00

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust; intake; blow-off valve and intercooler and adding more fuel and boost; but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit; you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles; and for many; we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application; kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates. Learn More

GReddy TURBO KIT GDB/GGB T67 25G-8CM R08

$4,775.00

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust; intake; blow-off valve and intercooler and adding more fuel and boost; but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit; you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles; and for many; we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application; kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates. Learn More

GReddy GDB TURBO KIT T67 25G W/G

$4,775.00

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust; intake; blow-off valve and intercooler and adding more fuel and boost; but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit; you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles; and for many; we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application; kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates. Learn More

GReddy TURBO KIT GDB/GGB TD06L2-20G R08

$4,535.00

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust; intake; blow-off valve and intercooler and adding more fuel and boost; but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit; you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles; and for many; we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application; kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates. Learn More

GReddy blow off valve kit type-rz Mitsubishi Lancer EVO 8/9

$325.00

GReddy Blow Off Valves are easily adjustable to eliminate compressor surge and preventing premature boost leakage; while increasing boost response between shifts. Each valve is made of durable cast and billet aluminum frame and the valve to diaphragm ratio provides performance that cheap piston types cannot offer. The spring stiffness adjustment screw and the three different sizes give the GReddy user the option to match vehicles with mild upgrades to heavily tuned engines. There are many factors in matching a blow-off valve to an application; valve location; turbocharger size and pressure; but as a general rule of thumb; we recommend the Type RS for 100-400hp. Also available in easy to install kit form for many turbocharged vehicles.
The Type RZ Blow Off Vale; is identical to the Type RS except for the fact that the RZ is a special limited edition color. Learn More

JE Pistons - Mitsubishi Lancer Evolution GSR YR: 2008-2011 [PN# 296905] MITSU 4B11T KIT

$1,078.32

Complete Set of Pistons
Bore : 86.5mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -6.2
Gram Weight : 324
Head CC : 50.5
Oversized : 0.5
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm

JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3405
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86.5mm - C/D33.35mm - Comp Ratio9.0:1 - Dome C
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

JE Pistons - Mitsubishi Lancer Evolution MR YR: 2008-2011 [PN# 296904] MITSU 4B11T KIT

$1,078.32

Complete Set of Pistons
Bore : 86mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -5.0
Gram Weight : 320
Head CC : 50.5
Oversized : STD
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm

JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3386
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86mm - C/D33.35mm - Comp Ratio9.0:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

JE Pistons - Subaru Forester 2.5 XT YR: 2005-2010 [PN# 291064] SUB EJ257 STRKR KIT

$1,088.44

Complete Set of Pistons
Bore : 100mm
C/D : 28.7mm
Comp Ratio : 8.5:1
Dome CC : -21.5
Gram Weight : 404
Head CC : 57.0
Oversized : 0.50
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 83mm

JE Time Attack FSR Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JC4404-3938
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore100mm - C/D28.7mm - Comp Ratio8.5:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

JE Pistons - Subaru Forester 2.5 XT YR: 2005-2010 [PN# 291063] SUB EJ257 STRKR KIT

$1,088.44

Complete Set of Pistons
Bore : 99.5mm
C/D : 28.7mm
Comp Ratio : 8.5:1
Dome CC : -21.5
Gram Weight : 398
Head CC : 57.0
Oversized : STD
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 83mm

JE Time Attack FSR Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JC3104-3917
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore99.5mm - C/D28.7mm - Comp Ratio8.5:1 - Dome CC
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

Search results for 'boost'