Search results for '1'
-
$160.00Mishimoto Radiator Hose Kit
Mishimoto Radiator Hose Kits are made with a dual layer combining high grade silicone and Dupont Nomex technology to provide efficient heat reduction and increased pressure tolerance.
Mishimoto Radiator Hose Kits are a direct replacement for your OEM hoses and install in minutes without headache.
Specifications
Interior Color: Orange
Interior Material: Nomex
Exterior Color: Black/Blue/Orange/Red
Exterior Material: Silicone
Max Temperature: 330 F Learn More -
$2,400.00For: Mitsubishi Lancer YR: 1996-2000 Cyl: 4 App: 2.0L Turbo Evo 4-6
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More -
$8,320.00JRZ Suspension Engineering is proud to offer our double adjustable racing damper. Our bespoke blow off valve compression system and racing piston design. implements our championship winning application of damping in an easy to use product. A wide adjustment range with precise. even adjustments engineered to enable the chassis tuner to make significant. predictable changes every time.
An easy to use system. the JRZ Double Adjustable enables the chassis tuner to achieve the desired ride and handling with uncontested precision. Digressive blow of allows for a stiff compression valving while maintaining smooth response. The result is a damper that provides ultra solid platform with smooth bump compliance. The JRZ standard large 22mm piston rod maximizes blow off valve responses to achieve solid chassis control without using a high spring rate. The mono tube design makes use of our standard motorsport piston. To customize track to track setups and tailor the chassis to the JRZ Double Adjustable has an adjustment range able to provide damping to spring configurations ranging from 1-4Hz.
The JRZ Double Adjustable takes you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. Valving designed and innovated by JRZ Suspension Engineering. The JRZ Double Adjustable Motorsport Damper is shipped as a custom configuration. always tailored to the customer’s needs. and always comes with our world renowned personal service2 Way Double Adjustable Damper shock 2 way (double ajustable) shock Double Adjustable Damper absorbers for race. Double Adjustable Damper shock. 2 Way Double Adjustable Damper shock Damper road or Double Adjustable shock Damper rally car and vehicles. Suspension sets for BMW. Porshe. Mitsubishi. Nissan. car. 2. way. double. adjustable damper. shock. absorber. race. road. rally. car. vehicles. BMW. Porsche. Mitsubishi. Nissan
Benefits- Precise control of the chassis and unsprung masses
- Pure racing valving
- Easy to change configurations
- Professional racing mandating 2 way adjustment
- Experienced club racing
-
$1,080.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Fenders are designed to replace your factory fenders and accept all lighting. molding and wheel wells for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Fenders.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$950.00For full on competition use only; we now offer the turbo-back Comp Ti-C series. These are full race turbo applications which include a large racing dowpipe to replace the factory catalytic converters at the race track. The Comp Ti-C is for off-road use only. (usually 80mm) Learn More -
$31.00Engine bearings one of most vital components within an engine are often overlooked when considering high performance upgrades. Performance engineered; multi-layer bearings generate less heat than normal bearings by reducing friction. Cosworth Race bearing sets feature a unique combination of design; metallurgy engineering to deliver performance in extreme condits. Cosworth Race bearings setsare available in sizes to accommodate most applications. Size 1 bearings a nominal standard size are used most applications. Size 2 bearings feature an additional .001 clearance should be used
when extra clearance is required.
Key Features
High strength overlay plate with reduced thickness better control less friction
Hardened steel backing on connecting bearings
Increased crush better retention
3/4 grooving on Main Bearings providing optimum supply
Tight consistent wall tolerances
Oversize chamfers where applicable
Flash plating eliminated improved heat transfer
Tested to over 1000 horsepower! Learn More -
$511.00COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch KitThis assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$120.00Mishimoto's developed a new line of Air Diversion Plates to enhance your engines cooling capacity. Mishimoto air diversion plates expert design is not only intended to enhance the aesthetic appeal of your engine; but will incomparably reduce your radiators coolant temperature. Improving the cooling capacity of your engine will promote superior combustion efficiency and the overall performance of your engine. All Mishimotos air diversion plates are constructed of 5052 aluminum and are available in several finishes. Choose from a natural brushed matte or an anodized glossy black or blue to enhance the look and style of your engine bay. Learn More -
$795.00For: Mitsubishi Lancer YR: 2001-2007 Cyl: 4 App: 2.0L Turbo Evo 7-9
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$10,760.00JRZ Suspension Engineering is proud to offer our newest triple adjustable racing damper. the JRZ 12 31. Building upon the years of success of our original triple adjustable damper. the JRZ 12 31 takes our damping philosophy to the next level. Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant predictable changes every time. Compression adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 12 31 have been redesigned to maximize efficiency and give crisp feel to the driver. Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother. To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available. An easy to use system. the JRZ 12 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard large 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate.
Features- Rebound adjustment independent from compression
- Extra large adjustment range
- 12 clicks low speed compression
- 21 clicks high speed compression
- 24 rebound • High response piston
- Precise canister
- Low friction
- Adjustable gas pressure
Benefits- Precise control of the chassis and unsprung masses
- Easy to change damping curves
- Large adjustment range. with fine tuning ability