Search results for 'Engine oil'

Designed to Increase HP and Acceleration Engineered to Specific Vehicle Design Easy to Install. Usually in 90 minutes or less! Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)  Million Mile Limited Warranty Replaces OEM Filter and Air Box Air Filter is Washable and Reusable Works with Original Equipment Manufacturer Computer Systems Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)

HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.

 

BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..

TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.

57i Intakes are not legal for use in California and other US States adopting California emission standards.

57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

Designed to Increase HP and Acceleration Engineered to Specific Vehicle Design Easy to Install. Usually in 90 minutes or less! Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)  Million Mile Limited Warranty Replaces OEM Filter and Air Box Air Filter is Washable and Reusable Works with Original Equipment Manufacturer Computer Systems Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)

HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.

 

BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..

TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.

57i Intakes are not legal for use in California and other US States adopting California emission standards.

57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205.EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

Designed to Increase HP and Acceleration Engineered to Specific Vehicle Design Easy to Install. Usually in 90 minutes or less! Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)  Million Mile Limited Warranty Replaces OEM Filter and Air Box Air Filter is Washable and Reusable Works with Original Equipment Manufacturer Computer Systems Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)

HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.

 

BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..

TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.

57i Intakes are not legal for use in California and other US States adopting California emission standards.

57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205.EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

SHELF PISTONS
CP stocking pistons are made from premium 2618 aluminum forgings that are application specific. CP pistons feature CNC craftsmanship; made to only the highest tolerances; made using the highest quality materials. Each set includes pistons; 5100 series alloy wrist pins (9310 pin upgrade available for high HP use); ring pack with ductile iron plasma top rings; tapered second rings; low tension oil rings and spiral locks. Most shelf units are in stock and ready to ship.
STROKER/CUSTOM PISTONS
CP custom pistons are made to order with 2618 aluminum forgings that are application specific. Choose any desired bore size and compression ratio; as well as added features like 9310 alloy wrist pin upgrade (5100 series is standard); anti-detonation grooves; lateral and/or vertical gas ports; and chamfered pin boss. All customs include premium ring pack with ductile iron plasma top rings; tapered second rings; low tension oil rings and spiral locks. Learn More

SHELF PISTONS
CP stocking pistons are made from premium 2618 aluminum forgings that are application specific. CP pistons feature CNC craftsmanship; made to only the highest tolerances; made using the highest quality materials. Each set includes pistons; 5100 series alloy wrist pins (9310 pin upgrade available for high HP use); ring pack with ductile iron plasma top rings; tapered second rings; low tension oil rings and spiral locks. Most shelf units are in stock and ready to ship.
STROKER/CUSTOM PISTONS
CP custom pistons are made to order with 2618 aluminum forgings that are application specific. Choose any desired bore size and compression ratio; as well as added features like 9310 alloy wrist pin upgrade (5100 series is standard); anti-detonation grooves; lateral and/or vertical gas ports; and chamfered pin boss. All customs include premium ring pack with ductile iron plasma top rings; tapered second rings; low tension oil rings and spiral locks. Learn More

Made from premium; 4340 steel billet material; Brian Crower connecting rods are available in two distinct styles depending on horsepower; budget and engine application; but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling.
The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners.
The BC625+ Series rods are designed for high horsepower; high boost and extreme rpm applications where nothing but the best rod will do. Features include ARPs premium Custom Age 625+ bolt rated to 280;000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long; reliable service; no matter what the boost; nits or RPM. Learn More

Made from premium; 4340 steel billet material; Brian Crower connecting rods are available in two distinct styles depending on horsepower; budget and engine application; but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling.
The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners.
The BC625+ Series rods are designed for high horsepower; high boost and extreme rpm applications where nothing but the best rod will do. Features include ARPs premium Custom Age 625+ bolt rated to 280;000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long; reliable service; no matter what the boost; nits or RPM. Learn More

Made from premium; 4340 steel billet material; Brian Crower connecting rods are available in two distinct styles depending on horsepower; budget and engine application; but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling.
The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners.
The BC625+ Series rods are designed for high horsepower; high boost and extreme rpm applications where nothing but the best rod will do. Features include ARPs premium Custom Age 625+ bolt rated to 280;000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long; reliable service; no matter what the boost; nits or RPM. Learn More

Brian Crower Bearings are sourced from the leader in performance engine bearings; ACL. All bearings are specifically chosen for maximum performance in your motor. Learn More