Search results for 'I take'

Cosworth High Performance engine assemblies the perfect basis your high performance application. Each version gone through countless hours of engineering evaluation to determine best combination of parts build specification; ensuring maximum reliable performance. Each Cosworth High Performance enginembly starts with new select components as foundation of performance build. Every block is thoroughly inspected before cylinders honed to perfection. We then balance rotating assembly that includes either a factory forged crankshaft or Cosworth Billet crank along with Cosworth Forged connecting rods; Cosworth Tri-Metal bearings Cosworth Forged Pistons. motorsport grade parts then professionally assembled by expert engine builders in Cosworth enginembly facility. Each High Performance enginembly includes a complete specification sheet listing critical dimensions along with a serialized plaque. maximum performance; combine with a Cosworth ported Valve Cylinder Head camshaft set.
Subaru EJ25 High Performance Short Block 2.5L
The Cosworth EJ25 is an excellent starting point high performance track applications.
New Subaru EJ25 EJ257 Block
New Subaru EJ25 Forged Crankshaft or Cosworth Billet Crank (79mm)
Cosworth Forged H-beam connecting rods
Cosworth Forged Pistons (99.5mm) rings
Cosworth Tri-metal bearings
Balanced to within .5 gram
Complete blue-print assembly
Ring set
Bearing clearance checked
Deck height checked
Connecting side clearance checked
Crankshaft float checked
Mitsubishi 4G63 (Evolution VII-IX) High Performance Short Block 2.0L
The Cosworth 2.0L 4G63 is an excellent starting point high performance track applications.
New Mitsubishi 4G63 Evolution Block
New Mitsubishi forged crankshaft (88mm)
Cosworth Forged H-beam connecting rods
Cosworth Forged Pistons (85mm) rings
Cosworth Tri-metal bearings
Cosworth Heavy Duty main studs
Piston squirt jets
Balanced to within .5 gram
Complete blue-print assembly
Ring set
Bearing clearance checked
Deck height checked
Connecting side clearance checked
Crankshaft float checked
Mitsubishi 4G63 (Evolution VII-IX) High Performance Short Block 2.2L
The Cosworth 4G63 2.2L stroker engine combines perfect bore to stroke ratio; yielding potentially gains in torque while still allowing engine to rotate produce power at higher rpms.
New Mitsubishi 4G63 Evolution Block
New Cosworth Billet Crank (94mm)
Cosworth Forged H-beam connecting rods
Cosworth Forged Pistons (86mm) rings
Cosworth Tri-metal bearings
Cosworth Heavy Duty main studs
Piston squirt jets
Balanced to within .5 gram
Complete blue-print assembly
Ring g Learn More

COMPETITION CLUTCH
Ultra Lightweight Steel Flywheel - STU

The STU flywheel is recommended for forced induction and/or track and rally racing applications.
This flywheel will work with ALL performance and stock clutch assemblies.

Qualities of the CCI Ultra Lightweight Steel Flywheel:
One piece ring gear for high durability
Weight varies from 8 lbs. to 18lbs. depending on application
Well suited for Stage 3 and up clutch kit applications

Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specifications

Reduced Mass = Increased Acceleration

Meets and exceeds SFI 1.5

Learn More

Mishimoto's developed several silicone couplers which can be used with a variety of pipe sizes and bends. Whether you are looking for a transition; straight or angle; Mishimoto's the perfect silicone couplers for you. Our silicone couplers are made from the same heat resistant embedded fibers as our silicone hose kitso you know they are durable and can withstand the toughest condits! Learn More

For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

JRZ Suspension Engineering is proud to introduce the JRZ RS1. a revolutionary development in multipurpose high performance damping. Applying our race winning technology. JRZ designed the JRZ RS1 to give ultimate comfort for public roads and precise chassis control when driving on track.
 
The JRZ RS1 is a high gas pressure. single adjustable monotube damper. The canister has been designed inside of the damper. JRZ inner canister technology gives the advantages of monotube canister dampers without the mounting concerns and complexity. Easy to install. the JRZ RS1 is available as a complete kit with mounting hardware and springs for all applications we support.Built on the same roduction line and sharing components with our pro racing applications. the JRZ RS1 is of true professional heritage. Following JRZ’s design philosophy. the JRZ RS1 has a large 22mm diameter piston rod in strut applications and a 16mm diameter piston rod in aluminium damper applications. The large piston rod magnifies the high pressure gas charge which means great chassis control without using a high spring rate or increasing harshness. 
Features

• 22 mm rod strut. 16 mm rod damper
• 24 clicks of rebound
• Adjustable gas pressure. mono tube
• Piston designed for high performance
• Large adjustment range

Utilizing a mono tube design with a high flow piston ensures the smoothest possible ride in normal conditions while the bleed adjustment gives the ability to tune for racing situations. Unlike many other single adjustable suspensions. damping balance is carefully maintained between compression and rebound. This damping balance is critical to maintaining tire contact with the road in addition to controlling the main mass of the vehicle. To satisfy the diverse needs of each driver’s application. the JRZ RS1 has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds. JRZ has designed the JRZ RS1 to give the end user the best possible damper to drive daily. while maintaining the racetrack performance that wins championships. The JRZ RS1 is shipped as a bolt-on kit and always comes with the personal support JRZ is known for. Using the best materials. coatings and aerospace standard manufacturing processes as in our motorsport line; the JRZ RS1 is designed to perform flawlessly. Adjustment is easy to perform and comes with the knowledge base only JRZ provides to his customers.
 
Benefits

• Easy to use and bolt-in
• Street ride. racing performance
• Extra long product life
• One adjustment for complete control of ride and handling
• Professional racing quality

Recommended applications

• Daily driving
• Drivers education (DE) events and track days
• Club racing

Learn More

Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Front Lips are designed to replace your factory lip (if equipped) or be added to your stock front end for a subtle and stylish look. In addition. many front lips add additional air ducting and down force to the front of your vehicle for added performance.
All SEIBON Carbon Fiber Products are:

Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Front Lip
GD Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Front Lip
GD Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Learn More