Search results for 'brake kit'
-
$315.00COMPETITION CLUTCH
Ultra Lightweight Steel Flywheel - STUThe STU flywheel is recommended for forced induction and/or track and rally racing applications.
This flywheel will work with ALL performance and stock clutch assemblies.Qualities of the CCI Ultra Lightweight Steel Flywheel:
One piece ring gear for high durability
Weight varies from 8 lbs. to 18lbs. depending on application
Well suited for Stage 3 and up clutch kit applicationsStamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specificationsReduced Mass = Increased Acceleration
Meets and exceeds SFI 1.5
Learn More -
$1,150.00For: Subaru BRZ YR: 2012-2013 Cyl: 4 App: 2.0L Eng 6-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$815.00A perfect match to GReddy cat-back exhaust systems and/or GReddy Supercharger Kits. All GReddy headers are made from stainless steel mandrel bent pipes. Great care was taken during the design to enhance the performance of your normally-aspirated or Supercharged vehicle; by fine-tuning the placement; size and angle of each collector to even out the exhaust pulses. Combined with large primary runners make GReddy Headers a solid choice for your vehicle.
Full stainless steel exhaust manifolds
Large primary runners; with tuned lengths & smooth collectors
Ideal for tuned Normally-Aspirated to Supercharged applications
CARB Excempt for many applications Learn More -
$511.00COMPETITION CLUTCH
Stage 4 Sprung - Strip Series 1620 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1620 Series kit includes a performance pressure plate; a six puck high torque sprung disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$635.00For: Subaru WRX YR: 2006-2011 Cyl: 4 App: 2.5L Turbo 5-SHPeed
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More -
$861.50With Gates Timing Components Kits. you dont have to shop for additional tensioner & idler pulleys. buy from multiple sources or hassle with returning components that dont fit. Timing component kits provide a complete system replacement solution. plus detailed installation instructions for each application. There is no guesswork required getting the proper fit.
Each kit includes all the parts for a specific application:
Timing Belts
Tensioner Pulleys
Idlers
Installation Instructions
Now everything that goes into a complete timing system installation comes out of a single box.
Timing Belt Component Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Learn More -
$751.00COMPETITION CLUTCH
Stage 2 - Street Series 2100 Clutch KitThis assembly provides up to 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300 mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).
The 2100 Series kit includes a performance pressure plate; a high torque sprung disc with antiburst steel backed Brass Plus facings; all applicable bearings; and the appropriate alignment tool.
Learn More -
$160.00Mishimoto Radiator Hose Kit
Mishimoto Radiator Hose Kits are made with a dual layer combining high grade silicone and Dupont Nomex technology to provide efficient heat reduction and increased pressure tolerance.
Mishimoto Radiator Hose Kits are a direct replacement for your OEM hoses and install in minutes without headache.
Specifications
Interior Color: Orange
Interior Material: Nomex
Exterior Color: Black/Blue/Orange/Red
Exterior Material: Silicone
Max Temperature: 330 F Learn More -
$615.00For: Subaru Forester YR: 2004-2005 Cyl: 4 App: 2.5L 5-SHPeed Turbo
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More -
![JE Pistons - Subaru Impreza YR: 2002-2008 [PN# 291060] SUB WRX HD/STI KIT](http://www.aqmotorsports.com/media/catalog/product/cache/1/small_image/300x/17f82f742ffe127f42dca9de82fb58b1/7/4/7430ad8c-7fa6-4497-8e74-deef04002157_6.jpg)
$1,088.44Complete Set of Pistons
Bore : 100mm
C/D : 30.7mm
Comp Ratio : 8.5:1
Dome CC : -26.1
Gram Weight : 423
Head CC : 48
Oversized : 0.5mm
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 79mm
For EJ257 Block w/EJ20 Head
JE Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Recommended RingSet: JC4404-3938
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Bore100mm - C/D30.7mm - Comp Ratio8.5:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More