Search results for 'brake kit'

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

For: Mitsubishi Lancer YR: 2004-2007 Cyl: 4 App: 2.0L O-Z Rally
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

The JRZ damper is an advanced development in high performance shock absorbers. The JRZ RS is a high gas pressure double adjustable twin tube damper. without the use of an external reservoir. Applying our race winning technology. JRZ designed the JRZ RS to give precise chassis control when driving on track and ultimate comfort for daily driving. Easy to install. the JRZ RS is available as a complete kit with mounting hardware and springs for all applications we support.  Following JRZ’s design philosophy. the JRZ RS has a large 22 mm diameter piston rod in strut applications and a 16 mm in aluminium damper applications. This means responsive chassis control at even the smallest suspension movements.  The large piston rod in combination with the high nitrogen gas pressure creates a lifting force giving great chassis control without using a high spring rate.  Our twin tube design uses a smaller diameter piston that gives a smooth feel during street driving. Working in conjunction with our blow off compression valving patterned from our racing dampers. the JRZ RS valving is the perfect marriage between daily driving and club racing.  To work with all ranges of spring and driver needs. the JRZ RS has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds.

Features

• 22mm piston rod
• Pre-set high gas pressure
• Piston developed for street and track
• Double adjustable
• 14 clicks compression
• 24 clicks rebound
• No canister
• Large adjustment range

These features culminate in the ultimate street and track damper. The JRZ RS is shipped as a bolt on kit with installation instructions and always comes with the personal service JRZ is known for.  Using the best materials. coatings and aerospace standard manufacturing processes; the JRZ RS is designed for long life. Unlike many clubsport dampers. the JRZ RS can be run for thousands of miles with no loss of performance or leakage.  Adjustment is easy to perform and comes with the knowledge basis only JRZ provides to its customers.

Benefits

• Easy installation
• Street ride. racing performance
• Long service life
• Applications available for prepared and stock class racing

Recommended applications

• Street/DE
• Club racing
• Prepared class racing

Learn More

Airinx Air Intake Kits; are complete vehicle specific systems. They are broken down into two main types. One is a simple to install Airinx combination with a one-piece molded internal funnel and pipe or airflow meter adapter. The second type adds smooth flowing mandrel-bent aluminum piping to improve air flow response; and in some case relocation of the air filter for better performance. Also available; kits for GReddy Supercharger Kits Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

The Cosworth ECPro is a higher performance solution engine management. Engineered in conjunction with Pectel Control Systems; Cosworth ECPro features an compatible harness connector a full base calibration allowing to go straight to dyno without workload of full and vehicle configuration.
The Cosworth ECPro is perfect demanding applications such as track day; rally motorsport and is housed in a machined from solid aluminum case with professional motorsport specification electronics. />Features
Designed full harness system integration Plug Perform. Base calibration supplied to a stock engine. There is no need replacement of wiring harness or sensors. Makes of dash diff controller
56Mhz processor. Higher performance timing accuracy control Ethernet comms Fast data offload high quality data viewing on PC
Internal logging memory. configured logging channel configuration at optimum rates performance analysis by your dealer. User define specific logging configurations. on board internal memory up to 2;000Hz of logging bandwidth is standard.
Knock monitoring Control. Advanced knock processing chip offers industry leading advanced knock signal filtration signal processing. MIL lamp indication of Detonation levels (witser defined levels based on and Boost).
Calibration select. (e.g. Fuel save; Test; Race) of OEM SI Drive switch selection of 3 alternate calibrations (calibration selectable boost; fuelling; ignition;rev limit; setting; VCAM target; Fly-By-Wire pedal mapping; overrun fuelling cut-off individually selectable Intelligent; Sports; Sports-Sharp).
Pectel (Anti System) switch (cruise control button) used ALS mode select.
Analog Inputs external sensors. Additional pressure transducers; temperature sensors; digital inputs be wired into EC for logging additional engine parameters and/or additional control strategies. number of analog inputs depends on specific model.
Closed Loop Boost Control. Full closed loop or open loop boost control PID parameters solenoid duty cycle map. Closed loop boost levels also selectable calibration select (see above).
Standard Motorsport Design. Machined billet aluminum case professional motorsports specification electronics.
OEM Narrow Band Supported be disabled by user.
External Wideband Supported. Compatible with wideband units with 0-5v analog output.
Internal Wideband Supported. kit Requires Cosworth by Pectel sensor; requires 3 extra populations 2 relocating. blank pins on harness populating.
Variable CAM. Pre-configured full quad camshaft support />External Comms Support. Optional Motorsport dash center differential controller.
Designed Racing OBDII Motorsport us Learn More

The JRZ damper is an advanced development in high performance shock absorbers. The JRZ RS is a high gas pressure double adjustable twin tube damper. without the use of an external reservoir. Applying our race winning technology. JRZ designed the JRZ RS to give precise chassis control when driving on track and ultimate comfort for daily driving. Easy to install. the JRZ RS is available as a complete kit with mounting hardware and springs for all applications we support.  Following JRZ’s design philosophy. the JRZ RS has a large 22 mm diameter piston rod in strut applications and a 16 mm in aluminium damper applications. This means responsive chassis control at even the smallest suspension movements.  The large piston rod in combination with the high nitrogen gas pressure creates a lifting force giving great chassis control without using a high spring rate.  Our twin tube design uses a smaller diameter piston that gives a smooth feel during street driving. Working in conjunction with our blow off compression valving patterned from our racing dampers. the JRZ RS valving is the perfect marriage between daily driving and club racing.  To work with all ranges of spring and driver needs. the JRZ RS has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds.

Features

• 22mm piston rod
• Pre-set high gas pressure
• Piston developed for street and track
• Double adjustable
• 14 clicks compression
• 24 clicks rebound
• No canister
• Large adjustment range

These features culminate in the ultimate street and track damper. The JRZ RS is shipped as a bolt on kit with installation instructions and always comes with the personal service JRZ is known for.  Using the best materials. coatings and aerospace standard manufacturing processes; the JRZ RS is designed for long life. Unlike many clubsport dampers. the JRZ RS can be run for thousands of miles with no loss of performance or leakage.  Adjustment is easy to perform and comes with the knowledge basis only JRZ provides to its customers.

Benefits

• Easy installation
• Street ride. racing performance
• Long service life
• Applications available for prepared and stock class racing

Recommended applications

• Street/DE
• Club racing
• Prepared class racing

Learn More

Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust; intake; blow-off valve and intercooler and adding more fuel and boost; but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit; you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles; and for many; we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application; kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates. Learn More

COMPETITION CLUTCH
Stage 3 - Street/Strip Series 2600 Clutch Kit

This segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life.

The 2600 Series kit includes a performance pressure plate; a high torque sprung disc with segmented Ceramic facings; all applicable bearings; and the appropriate alignment tool.

Learn More