Search results for 'I take'
-
$715.00GReddy Racing Ti-C Cat-back Exhausts combine the design; looks and flow of our Full Racing Titanium systems with the durability; deep sound; value and large application list of our other Stainless Steel street systems. This fusion of aggressive styling and practical construction; makes this the logical choice for both Race and Street Enthusiasts. The systems are comprised of a Titanium heat-treated tip; polished stainless steel muffler; unpolished stainless steel piping. It improves high and mid-range performance while still allowing for suitable sound levels when used with the included tuned Tri-mounted Silencer*. *Most applications below 92db; with all under 94db. The large list of applications include 80mm piping for Turbo applications and 50-60-70mm for Normally Aspirated vehicles. (usually 60mm) Learn More -
$19.00The Cosworth ECPro is a higher performance solution engine management. Engineered in conjunction with Pectel Control Systems; Cosworth ECPro features an compatible harness connector a full base calibration allowing to go straight to dyno without workload of full and vehicle configuration.
The Cosworth ECPro is perfect demanding applications such as track day; rally motorsport and is housed in a machined from solid aluminum case with professional motorsport specification electronics. />Features
Designed full harness system integration Plug Perform. Base calibration supplied to a stock engine. There is no need replacement of wiring harness or sensors. Makes of dash diff controller
56Mhz processor. Higher performance timing accuracy control Ethernet comms Fast data offload high quality data viewing on PC
Internal logging memory. configured logging channel configuration at optimum rates performance analysis by your dealer. User define specific logging configurations. on board internal memory up to 2;000Hz of logging bandwidth is standard.
Knock monitoring Control. Advanced knock processing chip offers industry leading advanced knock signal filtration signal processing. MIL lamp indication of Detonation levels (witser defined levels based on and Boost).
Calibration select. (e.g. Fuel save; Test; Race) of OEM SI Drive switch selection of 3 alternate calibrations (calibration selectable boost; fuelling; ignition;rev limit; setting; VCAM target; Fly-By-Wire pedal mapping; overrun fuelling cut-off individually selectable Intelligent; Sports; Sports-Sharp).
Pectel (Anti System) switch (cruise control button) used ALS mode select.
Analog Inputs external sensors. Additional pressure transducers; temperature sensors; digital inputs be wired into EC for logging additional engine parameters and/or additional control strategies. number of analog inputs depends on specific model.
Closed Loop Boost Control. Full closed loop or open loop boost control PID parameters solenoid duty cycle map. Closed loop boost levels also selectable calibration select (see above).
Standard Motorsport Design. Machined billet aluminum case professional motorsports specification electronics.
OEM Narrow Band Supported be disabled by user.
External Wideband Supported. Compatible with wideband units with 0-5v analog output.
Internal Wideband Supported. kit Requires Cosworth by Pectel sensor; requires 3 extra populations 2 relocating. blank pins on harness populating.
Variable CAM. Pre-configured full quad camshaft support />External Comms Support. Optional Motorsport dash center differential controller.
Designed Racing OBDII Motorsport us Learn More -
$360.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Fenders are designed to replace your factory fenders and accept all lighting. molding and wheel wells for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Fenders.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Fender Duct
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Fender Duct
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$390.00The SP line of GReddy Exhaust systems has set the benchmark for bolt-on; Street Performance: with style; sound; fitment; power and quality since 1994. The SP Elite; is GReddys latest version of this full stainless-steel legacy. Similar in style to the Spectrum Elite line; the SP Elitses a larger high flow piping; straight-through oval muffler(s) and resonated angled tip(s) for a sporty; yet refine exhaust note. However the SP Elite; has a more standard finished polished tip; stamp strengthen end caps and un-embossed muffler body; resulting in more affordable; more subtle; Sport Performance Exhaust. Learn More -
$95.00Engine bearings one of most vital components within an engine are often overlooked when considering high performance upgrades. Performance engineered; multi-layer bearings generate less heat than normal bearings by reducing friction. Cosworth Race bearing sets feature a unique combination of design; metallurgy engineering to deliver performance in extreme condits. Cosworth Race bearings setsare available in sizes to accommodate most applications. Size 1 bearings a nominal standard size are used most applications. Size 2 bearings feature an additional .001 clearance should be used
when extra clearance is required.
Key Features
High strength overlay plate with reduced thickness better control less friction
Hardened steel backing on connecting bearings
Increased crush better retention
3/4 grooving on Main Bearings providing optimum supply
Tight consistent wall tolerances
Oversize chamfers where applicable
Flash plating eliminated improved heat transfer
Tested to over 1000 horsepower! Learn More -
$511.00COMPETITION CLUTCH
Stage 5 Rigid - Strip Series 0420 Clutch KitThis assembly; available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0420 Series kit includes a performance pressure plate; a four puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$120.00Mishimoto's developed a new line of Air Diversion Plates to enhance your engines cooling capacity. Mishimoto air diversion plates expert design is not only intended to enhance the aesthetic appeal of your engine; but will incomparably reduce your radiators coolant temperature. Improving the cooling capacity of your engine will promote superior combustion efficiency and the overall performance of your engine. All Mishimotos air diversion plates are constructed of 5052 aluminum and are available in several finishes. Choose from a natural brushed matte or an anodized glossy black or blue to enhance the look and style of your engine bay. Learn More -
$1,245.00For: Mitsubishi Lancer YR: 1996-2000 Cyl: 4 App: 2.0L Turbo Evo 4-6
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$4,220.00JRZ Suspension Engineering is proud to introduce the JRZ RS1. a revolutionary development in multipurpose high performance damping. Applying our race winning technology. JRZ designed the JRZ RS1 to give ultimate comfort for public roads and precise chassis control when driving on track.
The JRZ RS1 is a high gas pressure. single adjustable monotube damper. The canister has been designed inside of the damper. JRZ inner canister technology gives the advantages of monotube canister dampers without the mounting concerns and complexity. Easy to install. the JRZ RS1 is available as a complete kit with mounting hardware and springs for all applications we support.Built on the same roduction line and sharing components with our pro racing applications. the JRZ RS1 is of true professional heritage. Following JRZ’s design philosophy. the JRZ RS1 has a large 22mm diameter piston rod in strut applications and a 16mm diameter piston rod in aluminium damper applications. The large piston rod magnifies the high pressure gas charge which means great chassis control without using a high spring rate or increasing harshness.
Features- 22 mm rod strut. 16 mm rod damper
- 24 clicks of rebound
- Adjustable gas pressure. mono tube
- Piston designed for high performance
- Large adjustment range
Benefits- Easy to use and bolt-in
- Street ride. racing performance
- Extra long product life
- One adjustment for complete control of ride and handling
- Professional racing quality
- Daily driving
- Drivers education (DE) events and track days
- Club racing
-
$317.99Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles). Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.
- Designed for increased performance for your sport compacts. utilizing the finest quality components
- Guaranteed to Provide more horsepower and increased acceleration
- Available in high-quality finishes
- Includes K&N High-Flow. Washable/Reusable Air Filter
- Some applications available in cold-air versions
- Easy to Install
- Million Mile Limited Warranty
- Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)
Typhoon Cold Air Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- ColorWrinkle Red Learn More