Search results for 'the'

Cosworth MaxSport brake kits feature lightweight machined hard anodized fully forged calipers. They engineered to provide a 20-percent reduction in weight without sacrificing stiffness or performance over standard Sport kit.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Hats brackets CNC machined to standards. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
20% reduction in weight over Cosworth Sport calipers
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Mishimoto Racing Thermostats will promote greater cooling efficiency throughout your engine. The Mishimoto racing thermostat will significantly lower high engine temperature produced by modified and upgraded turbo applications. Once the engine is fully warmed up the Mishimoto racing thermostat will open up at a lower temperature than standard thermostats; also allowing the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures. Learn More

For: Mitsubishi Lancer YR: 1996-2000 Cyl: 4 App: 2.0L Turbo Evo 4-6
The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for. Learn More

The JRZ damper is an advanced development in high performance shock absorbers. The JRZ RS is a high gas pressure double adjustable twin tube damper. without the use of an external reservoir. Applying our race winning technology. JRZ designed the JRZ RS to give precise chassis control when driving on track and ultimate comfort for daily driving. Easy to install. the JRZ RS is available as a complete kit with mounting hardware and springs for all applications we support.  Following JRZ’s design philosophy. the JRZ RS has a large 22 mm diameter piston rod in strut applications and a 16 mm in aluminium damper applications. This means responsive chassis control at even the smallest suspension movements.  The large piston rod in combination with the high nitrogen gas pressure creates a lifting force giving great chassis control without using a high spring rate.  Our twin tube design uses a smaller diameter piston that gives a smooth feel during street driving. Working in conjunction with our blow off compression valving patterned from our racing dampers. the JRZ RS valving is the perfect marriage between daily driving and club racing.  To work with all ranges of spring and driver needs. the JRZ RS has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds.

Features

• 22mm piston rod
• Pre-set high gas pressure
• Piston developed for street and track
• Double adjustable
• 14 clicks compression
• 24 clicks rebound
• No canister
• Large adjustment range

These features culminate in the ultimate street and track damper. The JRZ RS is shipped as a bolt on kit with installation instructions and always comes with the personal service JRZ is known for.  Using the best materials. coatings and aerospace standard manufacturing processes; the JRZ RS is designed for long life. Unlike many clubsport dampers. the JRZ RS can be run for thousands of miles with no loss of performance or leakage.  Adjustment is easy to perform and comes with the knowledge basis only JRZ provides to its customers.

Benefits

• Easy installation
• Street ride. racing performance
• Long service life
• Applications available for prepared and stock class racing

Recommended applications

• Street/DE
• Club racing
• Prepared class racing

Learn More

Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

Designed for increased performance for your sport compacts. utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow. Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

 

Typhoon Short Ram Intake Kit
Item Also Has International Applications
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

The GReddy downpipe utilizes mendrel bends to bend the piping smoothly. Exhaust resistance immediately after the turbocharger is reduced substantially with exhaust efficiency raised; supercharging whose efficiency is good is made even better. For the RB26DETT the pipings from the turbochargers are the same length to the collector; which lowers exhaust resistance by using the exhaust pulsation. Learn More

Cosworth High Performance Head Gaskets engineered to seal in power under most demanding condits. Constructed from stainless steel with a folded stopper layer; each application features superior sealing compared to conventional multi layer steel gaskets. Additionally; Cosworth High Performance Head Gaskets manufactured from pre-coated cut stainless steel resulting in uniform coating distribution consistent shape.
Key Features
Individual cut layers of stainless steel with superior consistency compared to laser gaskets
Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or areas
Manufacturing dimensional tolerance of 0.001
Die manufacturing process ensures smooth edges; unlike laser gaskets
Cosworth's gaskets feature a folded stopper layer additional torque around each cylinder. width of sealing area is specific each application thereby providing ultimate sealing properties
Available in a range of thicknesses specific applications Learn More

COMPETITION CLUTCH
Lightweight Steel Flywheel - ST

The ST flywheel is recommended for naturally aspirated and/or street driven applications.
This flywheel will work with ALL performance and stock clutch assemblies.

Qualities of the CCI Lightweight Steel Flywheel:
Preserves low end torque and drive ability.
One piece ring gear for high durability.
Weight varies from 11 lbs. to 25 lbs. depending on application.
Well suited for Stage 1 and Stage 2 clutch kit applications.

Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specifications

Reduced Mass = Increased Acceleration

Meets and exceeds SFI 1.5

Learn More