Search results for 'brake kit'

For: Subaru WRX Sti YR: 2004-2011 Cyl: 4 App: 2.5L Turbo 6-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

Designed to Increase HP and Acceleration Engineered to Specific Vehicle Design Easy to Install. Usually in 90 minutes or less! Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)  Million Mile Limited Warranty Replaces OEM Filter and Air Box Air Filter is Washable and Reusable Works with Original Equipment Manufacturer Computer Systems Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)

HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.

 

BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..

TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.

57i Intakes are not legal for use in California and other US States adopting California emission standards.

57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205.EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

For: Subaru WRX YR: 2002-2005 Cyl: 4 App: 2.0L Turbo 5-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

Brian Crower Spring and Retainers
Valvesprings
Designed for high rpm; Brian Crower valve springs are wound from only the highest grade; super clean; chrome silicone alloy and feature proprietary processing procedures (chamfer; debur; etc) for consistent pressures over long term; high rpm usage. Quality valve springs are critical in the prevention of premature valve float.
Retainers
The ultimate in lightweight high performance; Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances.
Spring/Retainer Kits
Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpms and allow for greater lift camshafts for added performance and reliability.
Keepers/Locks
Spring Seats Learn More

COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Mishimoto Radiator Hose Kit
Mishimoto Radiator Hose Kits are made with a dual layer combining high grade silicone and Dupont Nomex technology to provide efficient heat reduction and increased pressure tolerance.
Mishimoto Radiator Hose Kits are a direct replacement for your OEM hoses and install in minutes without headache.
Specifications

Interior Color: Orange
Interior Material: Nomex
Exterior Color: Black/Blue/Orange/Red
Exterior Material: Silicone
Max Temperature: 330 F Learn More

For: Subaru Impreza RS YR: 1996-1997 Cyl: 4 App: 1.8L / 2.2L
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

For: Subaru Forester YR: 2004-2006 Cyl: 4 App: 2.5L 5-SHPeed 4WD
The FX200 System uses the Power Plus I Pressure Plate and a Steel Backed Kevlar disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque rating and holding capacity as the FX100, however, its life expectancy is increased with the Kevlar disc. Our Kevlar friction material is non-abrasive and doesn't score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer. Minimum 500 Required break in miles. Please see The Technical guide for more details Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More