Search results for 'ACT clutch'

Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

Designed for increased performance for your sport compacts. utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow. Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

 

Typhoon Short Ram Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205.EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

The piston is of most important components within engine. It be subjected to directional change up to times every second must withstand acceleration forces of 8500gs. Cosworth high performance forged pistons designed engineered to withstand this type of punishment still perform. Cosworth's pistons manufactured using same methods as Formula pistons include features such anti scuff skirt coating; ultra-strong pins; polished and patented antidetonation bands. Additionally; each application uses a unique forging to minimize weight ensure strongest possible piston design.
Key Features
Unique forgings each application
Xylan anti scuff skirt coating
Polished tops (reduces carbon build up relieves stress)
Manufactured from proprietary alloy (CosAl 010)
Ultra strong pin
Patented anti-detonation bands Learn More

Because factory radiator hoses are made of rubber; they are prone to various damage such as swelling or cracks. The Mishimoto Aluminum Upper Radiator Hoses are CNC mandrel bent and made of high-quality T6 temper aluminum. With three colors to choose from; Mishimoto Aluminum Upper Radiator Hoses offer a colorful; strong; and stylish replacement to your factory rubber radiator hoses. Our aluminum upper radiator hose kits include silicone couplers and t-bolt clamps; with every component backed by an excellent lifetime warranty. Learn More

Brian Crower Spring and Retainers
Valvesprings
Designed for high rpm; Brian Crower valve springs are wound from only the highest grade; super clean; chrome silicone alloy and feature proprietary processing procedures (chamfer; debur; etc) for consistent pressures over long term; high rpm usage. Quality valve springs are critical in the prevention of premature valve float.
Retainers
The ultimate in lightweight high performance; Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances.
Spring/Retainer Kits
Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpms and allow for greater lift camshafts for added performance and reliability.
Keepers/Locks
Spring Seats Learn More

The addition of a GReddy intercooler is one of the best ways to safely increase horsepower in a turbocharged engine. By reducing the engines inlet temperatures; a denser air charge will enter the engine; this can make more horsepower at the same boost level and even more power at higher boost levels. Even if there is a factory-installed intercooler; generally these stock units are not ideal even for factory boost levels. They are usually mounted in awkward locations and become very susceptible to heat saturation. They are not ideal for increased boost levels. Our vehicle specific kits include all the necessary mounts; aluminum piping; hoses; and clamps required to install the kit. All kits are designed with specific cores to provide an ideal concession of cooling and flow; with the added benefit of aggressive looks and style. This is achieved by finding an ideal position and configuration for a wide range of boost levels. Our engineers properly size the number of rows in the core and tune the internal core with either a free flowing V-spec. core; our new M-Spec. bar-and-plate core; or our R-Spec core with a different inner fin patterns . The V-spec and R-Spec cores are a lightweight air-to-air; tube and fin design with a highly efficient tube design; which allows smooth ambient flow for optimum heat dissipation and flow to engine cooling systems. Although only offered in very limitsizes; the M-Spec core is an economical compromise that has performance; which lies between the free flowing V-spec. and the extreme cooling potential of the R-Spec. cores. GReddy intercoolers kits offer a great balance of heat exchanging efficiency and flow. The ends of the cores are TIG-welded and capped off with our smooth flowing heavy-duty cast aluminum GReddy endtanks. Lightweight mandrel bent aluminum piping and/or cast aluminum elbows; complete with hose couplers; are used to route air charge smoothly to and from the intercooler. Learn More

For a good balance of price and performance; Invidia offers the motorsport enthusiasts a strong line-up of Invidia N1 Exhausts. Each Invidia Exhaust is constructed with high quality SUS304 Stainless Steel; CNC-machined flanges; and manufactured with a polished finish. Each system features mandrel-bent stainless steel Piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains; as well as an increase in horsepower and torque. Racing Exhaust
Single Titanium TIP
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Piping 76mm - TIP 101mm Ti Learn More

Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Trunks and Hatches are designed to replace your factory trunk or hatch and accept all hinges. handles. glass and locks for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Trunks and Hatches.
OEM Style guarantees your SEIBON Carbon Fiber Trunk will look just like factory. No additional fins. ducting or alterations from stock aesthetics.
All SEIBON Carbon Fiber Products are:

Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Trunk/Hatch
OEM Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Trunk/Hatch
OEM Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Learn More