Search results for 'Subaru 2008 - 2010'
-
$548.00COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch KitThis assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$960.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges. latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods.
All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on. it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood
TSII Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood
TSII Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$343.00COMPETITION CLUTCH
Stage 3 - Street/Strip Series 2600 Clutch KitThis segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life.
The 2600 Series kit includes a performance pressure plate; a high torque sprung disc with segmented Ceramic facings; all applicable bearings; and the appropriate alignment tool.
Learn More -
$675.00For: Mitsubishi Lancer YR: 2002-2003 Cyl: 4 App: 2.0L O-Z Rally
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More -
$750.00greddy/GREX Oil Cooler Kits help prolong the life of your oil and in turn your internal engine components. Hard driving causes higher engine temperatures. greddy/GREX oil coolers are an excellent addition; and are especially effective in harsh driving environments. By using a similar inner-fin core design as our famous intercoolers; we are able to increase oil capacity; decrease oil temperatures; and extend engine and oil life. Our systems also offer an internal (or external) thermostat (opening range 71-85 C) to allow for quick engine warm up. The efficient core and durable steel-braided lines ensure good flow and a leak free installation. Learn More -
$946.00The connecting is vital link between piston power. When engine output is increased; demands placed on connecting increase as well. To ensure engine reliability in condits; original connecting rods should be replaced with heavy duty specification parts. Cosworth Forged Connecting Rods manufactured from high strength 4340 (EN24) steel machined to exacting tolerances.
Key Features
Strong; light weight H-beam design
Heavy duty bolt (260;000psi)
Manufactured from 4340 (EN24) steel
Small bushed floating pin Learn More -
$355.00COMPETITION CLUTCH
Stage 5 Rigid - Strip Series 0420 Clutch KitThis assembly; available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0420 Series kit includes a performance pressure plate; a four puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$4,535.00Vehicles that are already equipped with factory turbochargers have engines with large potential for power that cannot be fully obtained by using the original turbocharger(s). Big gains can be found by upgrading the exhaust; intake; blow-off valve and intercooler and adding more fuel and boost; but by also replacing the stock turbocharger with a properly sized GReddy turbo upgrade kit; you can experience new levels of power. Kits are available for most popular Japanese turbo vehicles; and for many; we offer a selection of kits with various sizes of turbos from mild upgrades to full-on race ready kits. Depending on application; kits will either bolt onto factory manifolds with integral wastegates or use hand-made SUS manifolds with external wastegates. Learn More -
$298.00COMPETITION CLUTCH
Ultra Lightweight Steel Flywheel - STUThe STU flywheel is recommended for forced induction and/or track and rally racing applications.
This flywheel will work with ALL performance and stock clutch assemblies.Qualities of the CCI Ultra Lightweight Steel Flywheel:
One piece ring gear for high durability
Weight varies from 8 lbs. to 18lbs. depending on application
Well suited for Stage 3 and up clutch kit applicationsStamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specificationsReduced Mass = Increased Acceleration
Meets and exceeds SFI 1.5
Learn More -
$815.00GReddy Racing Ti-C Cat-back Exhausts combine the design; looks and flow of our Full Racing Titanium systems with the durability; deep sound; value and large application list of our other Stainless Steel street systems. This fusion of aggressive styling and practical construction; makes this the logical choice for both Race and Street Enthusiasts. The systems are comprised of a Titanium heat-treated tip; polished stainless steel muffler; unpolished stainless steel piping. It improves high and mid-range performance while still allowing for suitable sound levels when used with the included tuned Tri-mounted Silencer*. *Most applications below 92db; with all under 94db. The large list of applications include 80mm piping for Turbo applications and 50-60-70mm for Normally Aspirated vehicles. (usually 60mm) Learn More