Search results for 'brake it'

The Cosworth ECPro is a higher performance solution engine management. Engineered in conjunction with Pectel Control Systems; Cosworth ECPro features an compatible harness connector a full base calibration allowing to go straight to dyno without workload of full and vehicle configuration.
The Cosworth ECPro is perfect demanding applications such as track day; rally motorsport and is housed in a machined from solid aluminum case with professional motorsport specification electronics. />Features
Designed full harness system integration Plug Perform. Base calibration supplied to a stock engine. There is no need replacement of wiring harness or sensors. Makes of dash diff controller
56Mhz processor. Higher performance timing accuracy control Ethernet comms Fast data offload high quality data viewing on PC
Internal logging memory. configured logging channel configuration at optimum rates performance analysis by your dealer. User define specific logging configurations. on board internal memory up to 2;000Hz of logging bandwidth is standard.
Knock monitoring Control. Advanced knock processing chip offers industry leading advanced knock signal filtration signal processing. MIL lamp indication of Detonation levels (witser defined levels based on and Boost).
Calibration select. (e.g. Fuel save; Test; Race) of OEM SI Drive switch selection of 3 alternate calibrations (calibration selectable boost; fuelling; ignition;rev limit; setting; VCAM target; Fly-By-Wire pedal mapping; overrun fuelling cut-off individually selectable Intelligent; Sports; Sports-Sharp).
Pectel (Anti System) switch (cruise control button) used ALS mode select.
Analog Inputs external sensors. Additional pressure transducers; temperature sensors; digital inputs be wired into EC for logging additional engine parameters and/or additional control strategies. number of analog inputs depends on specific model.
Closed Loop Boost Control. Full closed loop or open loop boost control PID parameters solenoid duty cycle map. Closed loop boost levels also selectable calibration select (see above).
Standard Motorsport Design. Machined billet aluminum case professional motorsports specification electronics.
OEM Narrow Band Supported be disabled by user.
External Wideband Supported. Compatible with wideband units with 0-5v analog output.
Internal Wideband Supported. kit Requires Cosworth by Pectel sensor; requires 3 extra populations 2 relocating. blank pins on harness populating.
Variable CAM. Pre-configured full quad camshaft support />External Comms Support. Optional Motorsport dash center differential controller.
Designed Racing OBDII Motorsport us Learn More

COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Mishimoto's developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly; Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components. Learn More

For: Mitsubishi Lancer YR: 1992-1995 Cyl: 4 App: 2.0L Turbo Evo 1-3
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

JRZ Suspension Engineering is proud to offer our newest quadruple adjustable racing damper. the JRZ 14 31.  Building upon the years of success of our original quadruple adjustable. the 14 31 takes our damping philosophy to the next level.  Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant. predictable changes every time. Compression and rebound adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 14 31 have been redesigned to maximize efficiency and give crisp feel to the driver.  Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother.  To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available.  An easy to use system. the JRZ 14 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed blow off adjustment allows for highly tuneable mass control while maintaining smooth response and without losing traction. The low speed bleed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance.

Features:

• Rebound adjustment independent from compression
• Extra large adjustment range
• 12 clicks low speed compression
• 21 clicks high speed compression
• 8 clicks low speed rebound
• 15 clicks high

The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ 14 31 dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility.  Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.  Our newest motorsport piston has been developed to deliver a smooth and responsive damping characteristic.  To customize track to track setups and tailor the chassis to the driver; the JRZ 14 31 has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamics loads.  The JRZ 14 31 is here to take you to the next level. Dedicated racing cars with experienced drivers deserving of the professional technology JRZ delivers. With valving designed and innovated by JRZ Suspension Engineering. the JRZ 14 31 is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Easy to change damping curves
• Large adjustment range. with fine tuning ability

Learn More

Made from premium; 4340 steel billet material; Brian Crower connecting rods are available in two distinct styles depending on horsepower; budget and engine application; but both include the exclusive Brian Crower oiling groove in the pin bushing for added oiling.
The bROD Series is intended for moderate boost applications and all motor race applications where peak horsepower is not going to exceed 700 at the flywheel. Utilizes venerable ARP2000 fasteners.
The BC625+ Series rods are designed for high horsepower; high boost and extreme rpm applications where nothing but the best rod will do. Features include ARPs premium Custom Age 625+ bolt rated to 280;000 p.s.i. for ultimate fastening capabilities as well as aluminum-bronze bushings to insure long; reliable service; no matter what the boost; nits or RPM. Learn More

With Gates Timing Components Kits. you dont have to shop for additional tensioner & idler pulleys. buy from multiple sources or hassle with returning components that dont fit. Timing component kits provide a complete system replacement solution. plus detailed installation instructions for each application. There is no guesswork required getting the proper fit.
Each kit includes all the parts for a specific application:

Timing Belts
Tensioner Pulleys
Idlers
Installation Instructions
Now everything that goes into a complete timing system installation comes out of a single box.
Timing Belt Component Kit W/Water Pump
Engine :-
Aspiration :- Naturally Aspirated!T
Vehicle Engine Options :- EJ253.EJ255
Vehicle Interior Options :- H4 Aspiration: N!T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-

w/ SOHC Eng w/ Auto Trans
Learn More

COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Because factory radiator hoses are made of rubber; they are prone to various damage such as swelling or cracks. The Mishimoto Aluminum Upper Radiator Hoses are CNC mandrel bent and made of high-quality T6 temper aluminum. With three colors to choose from; Mishimoto Aluminum Upper Radiator Hoses offer a colorful; strong; and stylish replacement to your factory rubber radiator hoses. Our aluminum upper radiator hose kits include silicone couplers and t-bolt clamps; with every component backed by an excellent lifetime warranty. Learn More