Search results for 'brake it'

Parasitic drag decreases performance. By installing GReddys lightweight; blue anodized Duralumin Pulleys for the water pump; power steering and alternator; power loses can be kept to a minimum. Ideal for tuned engines; these kits look good and perform well. Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Mishimoto's developed several silicone couplers which can be used with a variety of pipe sizes and bends. Whether you are looking for a transition; straight or angle; Mishimoto's the perfect silicone couplers for you. Our silicone couplers are made from the same heat resistant embedded fibers as our silicone hose kitso you know they are durable and can withstand the toughest condits! Learn More

For: Mitsubishi Lancer YR: 2001-2007 Cyl: 4 App: 2.0L Turbo Evo 7-9
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More

JRZ Suspension is proud to offer our Triple Adjustable racing damper. Advancing the design of our Double Adjustable further. the JRZ Triple Adjustable utilizes the same piston design while adding function to the Triple Adjustable canister. Like the Double Adjustable. the Triple Adjustable has a wide adjustment range with precise. even adjustments engineered to enable the chassis tuner to make significant. predictable changes every time.

Compression adjustments are separated into the high speed and low speed piston velocity ranges. This level of adjustment creates an environment for precise tuning. The mono tube Triple Adjustable Damper offers a wide adjustment range allowing the user to tailor the damper to driver. track and vehicle. The JRZ Triple Adjustable Damper is available as a complete kit with springs and mounting hardware. Custom applications are available.

An easy to use system. the Triple Adjustable Damper enables the chassis tuner to achieve the desired mass control and handling with precision.  Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction.
The JRZ standard large 22mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ Triple Adjustable dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility. Our proven piston has been developed to deliver a smooth and responsive damping characteristic. To customize track to tracks setups and tailor the chassis to the driver; the JRZ Triple Adjustable Damper has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamic loads. Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.

Features

• Large adjustment range
• 6 clicks low speed compression
• 14 clicks high speed compression
• 24 clicks rebound
• High response piston
• Precise canister
• Adjustable gas pressure

The JRZ Triple Adjustable takes you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. Valving designed and innovated by JRZ Suspension Engineering. the JRZ Triple Adjustable is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Excellent tyre wear 
• Easy to change configurations

Recommended applications

• Professional racing mandating 3 way adjustment
• Experienced club racing

Learn More

Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Fenders are designed to replace your factory fenders and accept all lighting. molding and wheel wells for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Fenders.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More