Search results for 'brake it'
-
$64.00The Cosworth Filler is machined from solid aluminum with traditional Cosworth three prong ergonomic style. This light weight fiiler includes a genuine factory O-ring seal; pre-installed to ensure leak free operation on your engine. Each features a durable anodized finish.
Specs:
Machined from solid aluminum
Durable anodized finish
Includes pre-install O-ring leak free operation
Ergonomic ; three prong design
Proudly Made in USA Learn More -
$239.00COMPETITION CLUTCH
Lightweight Steel Flywheel - STThe ST flywheel is recommended for naturally aspirated and/or street driven applications.
This flywheel will work with ALL performance and stock clutch assemblies.Qualities of the CCI Lightweight Steel Flywheel:
Preserves low end torque and drive ability.
One piece ring gear for high durability.
Weight varies from 11 lbs. to 25 lbs. depending on application.
Well suited for Stage 1 and Stage 2 clutch kit applications.
Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specificationsReduced Mass = Increased Acceleration
Meets and exceeds SFI 1.5
Learn More -
$220.00Mishimoto's developed several silicone couplers which can be used with a variety of pipe sizes and bends. Whether you are looking for a transition; straight or angle; Mishimoto's the perfect silicone couplers for you. Our silicone couplers are made from the same heat resistant embedded fibers as our silicone hose kitso you know they are durable and can withstand the toughest condits! Learn More -
$1,245.00For: Mitsubishi Lancer YR: 1996-2000 Cyl: 4 App: 2.0L Turbo Evo 4-6
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$4,950.00The JRZ damper is an advanced development in high performance shock absorbers. The JRZ RS is a high gas pressure double adjustable twin tube damper. without the use of an external reservoir. Applying our race winning technology. JRZ designed the JRZ RS to give precise chassis control when driving on track and ultimate comfort for daily driving. Easy to install. the JRZ RS is available as a complete kit with mounting hardware and springs for all applications we support. Following JRZ’s design philosophy. the JRZ RS has a large 22 mm diameter piston rod in strut applications and a 16 mm in aluminium damper applications. This means responsive chassis control at even the smallest suspension movements. The large piston rod in combination with the high nitrogen gas pressure creates a lifting force giving great chassis control without using a high spring rate. Our twin tube design uses a smaller diameter piston that gives a smooth feel during street driving. Working in conjunction with our blow off compression valving patterned from our racing dampers. the JRZ RS valving is the perfect marriage between daily driving and club racing. To work with all ranges of spring and driver needs. the JRZ RS has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds.
Features- 22mm piston rod
- Pre-set high gas pressure
- Piston developed for street and track
- Double adjustable
- 14 clicks compression
- 24 clicks rebound
- No canister
- Large adjustment range
Benefits- Easy installation
- Street ride. racing performance
- Long service life
- Applications available for prepared and stock class racing
Recommended applications- Street/DE
- Club racing
- Prepared class racing
-
$1,200.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Hartops are designed to replace your factory hardtop or convertible top and accept all hinges. handles and glass for 100% Bolt On fitment. Cut weight and increase handling in style with a SEIBON Carbon Hardtop.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Roof
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Roof
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$1,810.00A perfect match to GReddy cat-back exhaust systems and/or GReddy Supercharger Kits. All GReddy headers are made from stainless steel mandrel bent pipes. Great care was taken during the design to enhance the performance of your normally-aspirated or Supercharged vehicle; by fine-tuning the placement; size and angle of each collector to even out the exhaust pulses. Combined with large primary runners make GReddy Headers a solid choice for your vehicle.
Full stainless steel exhaust manifolds
Large primary runners; with tuned lengths & smooth collectors
Ideal for tuned Normally-Aspirated to Supercharged applications
CARB Excempt for many applications Learn More -
$824.00The piston is of most important components within engine. It be subjected to directional change up to times every second must withstand acceleration forces of 8500gs. Cosworth high performance forged pistons designed engineered to withstand this type of punishment still perform. Cosworth's pistons manufactured using same methods as Formula pistons include features such anti scuff skirt coating; ultra-strong pins; polished and patented antidetonation bands. Additionally; each application uses a unique forging to minimize weight ensure strongest possible piston design.
Key Features
Unique forgings each application
Xylan anti scuff skirt coating
Polished tops (reduces carbon build up relieves stress)
Manufactured from proprietary alloy (CosAl 010)
Ultra strong pin
Patented anti-detonation bands Learn More -
$487.00COMPETITION CLUTCH
Stage 2 - Street Series 2100 Clutch KitThis assembly provides up to 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300 mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).
The 2100 Series kit includes a performance pressure plate; a high torque sprung disc with antiburst steel backed Brass Plus facings; all applicable bearings; and the appropriate alignment tool.
Learn More -
$160.00Mishimoto Radiator Hose Kit
Mishimoto Radiator Hose Kits are made with a dual layer combining high grade silicone and Dupont Nomex technology to provide efficient heat reduction and increased pressure tolerance.
Mishimoto Radiator Hose Kits are a direct replacement for your OEM hoses and install in minutes without headache.
Specifications
Interior Color: Orange
Interior Material: Nomex
Exterior Color: Black/Blue/Orange/Red
Exterior Material: Silicone
Max Temperature: 330 F Learn More
