Search results for 'the'

The addition of a GReddy intercooler is one of the best ways to safely increase horsepower in a turbocharged engine. By reducing the engines inlet temperatures; a denser air charge will enter the engine; this can make more horsepower at the same boost level and even more power at higher boost levels. Even if there is a factory-installed intercooler; generally these stock units are not ideal even for factory boost levels. They are usually mounted in awkward locations and become very susceptible to heat saturation. They are not ideal for increased boost levels. Our vehicle specific kits include all the necessary mounts; aluminum piping; hoses; and clamps required to install the kit. All kits are designed with specific cores to provide an ideal concession of cooling and flow; with the added benefit of aggressive looks and style. This is achieved by finding an ideal position and configuration for a wide range of boost levels. Our engineers properly size the number of rows in the core and tune the internal core with either a free flowing V-spec. core; our new M-Spec. bar-and-plate core; or our R-Spec core with a different inner fin patterns . The V-spec and R-Spec cores are a lightweight air-to-air; tube and fin design with a highly efficient tube design; which allows smooth ambient flow for optimum heat dissipation and flow to engine cooling systems. Although only offered in very limitsizes; the M-Spec core is an economical compromise that has performance; which lies between the free flowing V-spec. and the extreme cooling potential of the R-Spec. cores. GReddy intercoolers kits offer a great balance of heat exchanging efficiency and flow. The ends of the cores are TIG-welded and capped off with our smooth flowing heavy-duty cast aluminum GReddy endtanks. Lightweight mandrel bent aluminum piping and/or cast aluminum elbows; complete with hose couplers; are used to route air charge smoothly to and from the intercooler. Learn More

Cosworth MaxSport brake kits feature lightweight machined hard anodized fully forged calipers. They engineered to provide a 20-percent reduction in weight without sacrificing stiffness or performance over standard Sport kit.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Hats brackets CNC machined to standards. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
20% reduction in weight over Cosworth Sport calipers
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

The piston is of most important components within engine. It be subjected to directional change up to times every second must withstand acceleration forces of 8500gs. Cosworth high performance forged pistons designed engineered to withstand this type of punishment still perform. Cosworth's pistons manufactured using same methods as Formula pistons include features such anti scuff skirt coating; ultra-strong pins; polished and patented antidetonation bands. Additionally; each application uses a unique forging to minimize weight ensure strongest possible piston design.
Key Features
Unique forgings each application
Xylan anti scuff skirt coating
Polished tops (reduces carbon build up relieves stress)
Manufactured from proprietary alloy (CosAl 010)
Ultra strong pin
Patented anti-detonation bands Learn More

For: Mitsubishi Lancer YR: 1996-2000 Cyl: 4 App: 2.0L Turbo Evo 4-6
The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for. Learn More

JRZ Suspension Engineering offers the best high performance club sport damper available today. Combining the best aspects of our JRZ RS and 2-way racing damper. the JRZ RS Pro gives the owner ultimate suspension tuning ability while maintaining compliance for driving on public roads. A mono tube double adjustable damper with adjustable gas pressure. the JRZ RS Pro offers an increased adjustment range allowing the user to tune the car to their further needs. The JRZ RS Pro is available as a complete kit with springs and mounting hardware. Taking club sport performance to the next level. the RS Pro has a remote canister with a digressive blow off system. Digressive blow off allows for a stiff compression valving while maintaining smooth response. The result is a damper that provides ultra solid platform with smooth bump compliance. JRZ standard 22mm piston rods maximize flow to the blow off valve response to great chassis control without using a high spring rate.

Features
• 22 mm rod strut. 16 mm rod damper
• 12 clicks of compression
• 24 clicks of rebound
• Adjustable gas pressure. mono tube
• Piston designed for high performance
• Large adjustment range
• Fixed hoses for easy mounting. available quick disconnect fittings
• Remote reservoir or piggyback canister 
JRZ RS Pro damper kits are available in piggyback configurations or with remote canisters. The canister can be fixed to the damper for ease of installation. To customize track to track setups and tailor the chassis to the JRZ RS Pro has an extra large adjustment range.
Each adjustment is designed to be an even step giving you predictability when making changes. The design of the JRZ RS Pro takes you to the next level. Stiffer cars with higher levels of power demand the control JRZ can supply. With the control of gas pressure charge as well and compression and rebound adjustments. the JRZ RS Pro will get the most out of your high performance car. The JRZ RS Pro is shipped as a bolt on kit with installation instructions and always comes with our world renowned personal service of JRZ.

Benefits
• Better chassis control for higher rate springs/power/ratio
• Street ride. racing performance
• Easy to change configurations

Recommended applications 
• Highly modified Street/DE
• Experienced club racing
• Entry level professional racing Learn More

Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles.  Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake.  They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles).  Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

Designed for increased performance for your sport compacts. utilizing the finest quality components Guaranteed to Provide more horsepower and increased acceleration Available in high-quality finishes Includes K&N High-Flow. Washable/Reusable Air Filter Some applications available in cold-air versions Easy to Install Million Mile Limited Warranty Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

 

Typhoon Cold Air Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

The GReddy downpipe utilizes mendrel bends to bend the piping smoothly. Exhaust resistance immediately after the turbocharger is reduced substantially with exhaust efficiency raised; supercharging whose efficiency is good is made even better. For the RB26DETT the pipings from the turbochargers are the same length to the collector; which lowers exhaust resistance by using the exhaust pulsation. Learn More

Cosworth Thermal Composite Gaskets Learn More