Search results for 'Subaru 2008 - 2010'
-
$43.00Cosworth Performance Filters constructed from a proprietary synthetic; woven single layer; pleated polyester filter media that requires no oiling. an OE like fit; filter housing is injected molded from High Impact Polystyrene or Polypropylene Each Cosworth filter been engineered to the vehicles original box providing a true cold supply to engine. Cosworth Performance Filters also provide increased flow when compared to original equipment filters.
Features
Improved performance
Superior filtration
Exceptional dust holding capacity
Reduced restriction (10%+ compared to OE filters)
Over efficiency Learn More -
$980.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges. latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods.
All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on. it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood
CWII Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood
CWII Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255,EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$4,015.00Cosworth MaxSport brake kits feature lightweight machined hard anodized fully forged calipers. They engineered to provide a 20-percent reduction in weight without sacrificing stiffness or performance over standard Sport kit.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Hats brackets CNC machined to standards. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
20% reduction in weight over Cosworth Sport calipers
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$265.00Mishimoto's developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly; Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components. Learn More -
$1,094.00The Cosworth Subaru High Volume Inlet Manifold is cast from aluminum featuring large tapered runners with radiused inlets improved flow. Plenum volume been substantially increased tuned power. Engineered easy installation is key to making power. Cosworth EJ257 plenum is designed use with 2004-2009 engines equipped with electronic throttle control. plenum is designed use with cable-actuated throttle body EJ20/25 applications. This plenum is designed to replace factory Subaru plenum in vehicles equipped with an aftermarket front-mounted intercooler (FMIC) kit. Throttle body position remains stock; ensuring fitment with brand FMIC kitsigned the stock throttle body intake manifold. 2008-2009 Subaru STIs Cosworth FMIC (p/n 20005378) is highly recommended.
Features
Substantially increased plenum volume
Large; tapered runners with radius inlets
Tuned plenum volume runner length/taper
Over increase in flow
Integral vacuum manifold connection of brake booster; boost gauge; sensor; boost controller; etc.
Will work with standard or forward mount electronic throttle body configurations
Stock throttle body location compatibility with most aftermarket FMIC kits Learn More -
$2,600.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Doors are designed to replace your factory doors and accept all hinges. handles. glass and locks for 100% Bolt On fitment. Cut weight in style with Seibon Doors.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionFront
Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255,EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionFront Learn More -
$215.00The piston is of most important components within engine. It be subjected to directional change up to times every second must withstand acceleration forces of 8500gs. Cosworth high performance forged pistons designed engineered to withstand this type of punishment still perform. Cosworth's pistons manufactured using same methods as Formula pistons include features such anti scuff skirt coating; ultra-strong pins; polished and patented antidetonation bands. Additionally; each application uses a unique forging to minimize weight ensure strongest possible piston design.
Key Features
Unique forgings each application
Xylan anti scuff skirt coating
Polished tops (reduces carbon build up relieves stress)
Manufactured from proprietary alloy (CosAl 010)
Ultra strong pin
Patented anti-detonation bands Learn More -
$122.00The piston is of most important components within engine. It be subjected to directional change up to times every second must withstand acceleration forces of 8500gs. Cosworth high performance forged pistons designed engineered to withstand this type of punishment still perform. Cosworth's pistons manufactured using same methods as Formula pistons include features such anti scuff skirt coating; ultra-strong pins; polished and patented antidetonation bands. Additionally; each application uses a unique forging to minimize weight ensure strongest possible piston design.
Key Features
Unique forgings each application
Xylan anti scuff skirt coating
Polished tops (reduces carbon build up relieves stress)
Manufactured from proprietary alloy (CosAl 010)
Ultra strong pin
Patented anti-detonation bands Learn More -
$2,000.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Dry Carbon Trunks are the latest evolution of the SEIBON product offering.
Super light weight. extremely strong and ready to accept all factory mounts and accessories. Dry Carbon Trunk
OEM Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Dry Carbon Trunk
OEM Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255,EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$832.00For a good balance of price and performance; Invidia offers the motorsport enthusiasts a strong line-up of Invidia N1 Exhausts. Each Invidia Exhaust is constructed with high quality SUS304 Stainless Steel; CNC-machined flanges; and manufactured with a polished finish. Each system features mandrel-bent stainless steel Piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains; as well as an increase in horsepower and torque. N1 Exhaust
Single Titanium TIP
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255;EJ257
Vehicle Interior Options :- ALL Aspiration: T
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Piping 76mm - TIP 101mm Ti Learn More