Search results for 'Evo x catback'

For: Subaru Impreza RS YR: 1994-1995 Cyl: 4 App: 1.8L 4WD
The FX200 System uses the Power Plus I Pressure Plate and a Steel Backed Kevlar disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque rating and holding capacity as the FX100, however, its life expectancy is increased with the Kevlar disc. Our Kevlar friction material is non-abrasive and doesn't score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer. Minimum 500 Required break in miles. Please see The Technical guide for more details Learn More

Gates Timing Belt Tensioner
Timing Belt Tensioner
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- EJ253
Vehicle Interior Options :- H4 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-


Learn More

COMPETITION CLUTCH
Stage 4 Sprung - Strip Series 1620 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1620 Series kit includes a performance pressure plate; a six puck high torque sprung disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Cosworth High Performance engine assemblies the perfect basis your high performance application. Each version gone through countless hours of engineering evaluation to determine best combination of parts build specification; ensuring maximum reliable performance. Each Cosworth High Performance enginembly starts with new select components as foundation of performance build. Every block is thoroughly inspected before cylinders honed to perfection. We then balance rotating assembly that includes either a factory forged crankshaft or Cosworth Billet crank along with Cosworth Forged connecting rods; Cosworth Tri-Metal bearings Cosworth Forged Pistons. motorsport grade parts then professionally assembled by expert engine builders in Cosworth enginembly facility. Each High Performance enginembly includes a complete specification sheet listing critical dimensions along with a serialized plaque. maximum performance; combine with a Cosworth ported Valve Cylinder Head camshaft set.
Subaru EJ25 High Performance Short Block 2.5L
The Cosworth EJ25 is an excellent starting point high performance track applications.
New Subaru EJ25 EJ257 Block
New Subaru EJ25 Forged Crankshaft or Cosworth Billet Crank (79mm)
Cosworth Forged H-beam connecting rods
Cosworth Forged Pistons (99.5mm) rings
Cosworth Tri-metal bearings
Balanced to within .5 gram
Complete blue-print assembly
Ring set
Bearing clearance checked
Deck height checked
Connecting side clearance checked
Crankshaft float checked
Mitsubishi 4G63 (Evolution VII-IX) High Performance Short Block 2.0L
The Cosworth 2.0L 4G63 is an excellent starting point high performance track applications.
New Mitsubishi 4G63 Evolution Block
New Mitsubishi forged crankshaft (88mm)
Cosworth Forged H-beam connecting rods
Cosworth Forged Pistons (85mm) rings
Cosworth Tri-metal bearings
Cosworth Heavy Duty main studs
Piston squirt jets
Balanced to within .5 gram
Complete blue-print assembly
Ring set
Bearing clearance checked
Deck height checked
Connecting side clearance checked
Crankshaft float checked
Mitsubishi 4G63 (Evolution VII-IX) High Performance Short Block 2.2L
The Cosworth 4G63 2.2L stroker engine combines perfect bore to stroke ratio; yielding potentially gains in torque while still allowing engine to rotate produce power at higher rpms.
New Mitsubishi 4G63 Evolution Block
New Cosworth Billet Crank (94mm)
Cosworth Forged H-beam connecting rods
Cosworth Forged Pistons (86mm) rings
Cosworth Tri-metal bearings
Cosworth Heavy Duty main studs
Piston squirt jets
Balanced to within .5 gram
Complete blue-print assembly
Ring g Learn More

JRZ Suspension is proud to offer our Triple Adjustable racing damper. Advancing the design of our Double Adjustable further. the JRZ Triple Adjustable utilizes the same piston design while adding function to the Triple Adjustable canister. Like the Double Adjustable. the Triple Adjustable has a wide adjustment range with precise. even adjustments engineered to enable the chassis tuner to make significant. predictable changes every time.

Compression adjustments are separated into the high speed and low speed piston velocity ranges. This level of adjustment creates an environment for precise tuning. The mono tube Triple Adjustable Damper offers a wide adjustment range allowing the user to tailor the damper to driver. track and vehicle. The JRZ Triple Adjustable Damper is available as a complete kit with springs and mounting hardware. Custom applications are available.

An easy to use system. the Triple Adjustable Damper enables the chassis tuner to achieve the desired mass control and handling with precision.  Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction.
The JRZ standard large 22mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ Triple Adjustable dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility. Our proven piston has been developed to deliver a smooth and responsive damping characteristic. To customize track to tracks setups and tailor the chassis to the driver; the JRZ Triple Adjustable Damper has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamic loads. Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.

Features

• Large adjustment range
• 6 clicks low speed compression
• 14 clicks high speed compression
• 24 clicks rebound
• High response piston
• Precise canister
• Adjustable gas pressure

The JRZ Triple Adjustable takes you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. Valving designed and innovated by JRZ Suspension Engineering. the JRZ Triple Adjustable is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Excellent tyre wear 
• Easy to change configurations

Recommended applications

• Professional racing mandating 3 way adjustment
• Experienced club racing

Learn More

Gates Belt Drive Tensioner
Belt Drive Tensioner
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- EZ30D
Vehicle Interior Options :- H6 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-


Learn More

COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Large diameter valves essential improved flow. Cosworth high performance intake valves produced from high quality stainless steel maximum durability. Exhaust valves machined from Inconel for
high temperature (2400 F) reliability. Each valve features swirl polished back improved flow dished face additional weight reduction. Cosworth high performance valves compatible with Cosworth Ultra
Race Valve Spring kits. Learn More

JRZ Suspension Engineering offers the best high performance club sport damper available today. Combining the best aspects of our JRZ RS and 2-way racing damper. the JRZ RS Pro gives the owner ultimate suspension tuning ability while maintaining compliance for driving on public roads. A mono tube double adjustable damper with adjustable gas pressure. the JRZ RS Pro offers an increased adjustment range allowing the user to tune the car to their further needs. The JRZ RS Pro is available as a complete kit with springs and mounting hardware. Taking club sport performance to the next level. the RS Pro has a remote canister with a digressive blow off system. Digressive blow off allows for a stiff compression valving while maintaining smooth response. The result is a damper that provides ultra solid platform with smooth bump compliance. JRZ standard 22mm piston rods maximize flow to the blow off valve response to great chassis control without using a high spring rate.

Features
• 22 mm rod strut. 16 mm rod damper
• 12 clicks of compression
• 24 clicks of rebound
• Adjustable gas pressure. mono tube
• Piston designed for high performance
• Large adjustment range
• Fixed hoses for easy mounting. available quick disconnect fittings
• Remote reservoir or piggyback canister 
JRZ RS Pro damper kits are available in piggyback configurations or with remote canisters. The canister can be fixed to the damper for ease of installation. To customize track to track setups and tailor the chassis to the JRZ RS Pro has an extra large adjustment range.
Each adjustment is designed to be an even step giving you predictability when making changes. The design of the JRZ RS Pro takes you to the next level. Stiffer cars with higher levels of power demand the control JRZ can supply. With the control of gas pressure charge as well and compression and rebound adjustments. the JRZ RS Pro will get the most out of your high performance car. The JRZ RS Pro is shipped as a bolt on kit with installation instructions and always comes with our world renowned personal service of JRZ.

Benefits
• Better chassis control for higher rate springs/power/ratio
• Street ride. racing performance
• Easy to change configurations

Recommended applications 
• Highly modified Street/DE
• Experienced club racing
• Entry level professional racing Learn More