Search results for 'the'

COMPETITION CLUTCH
Stage 4 Sprung - Strip Series 1620 Clutch Kit

This assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 1620 Series kit includes a performance pressure plate; a six puck high torque sprung disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

JRZ Suspension Engineering is proud to offer our newest quadruple adjustable racing damper. the JRZ 14 31.  Building upon the years of success of our original quadruple adjustable. the 14 31 takes our damping philosophy to the next level.  Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant. predictable changes every time. Compression and rebound adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 14 31 have been redesigned to maximize efficiency and give crisp feel to the driver.  Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother.  To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available.  An easy to use system. the JRZ 14 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed blow off adjustment allows for highly tuneable mass control while maintaining smooth response and without losing traction. The low speed bleed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance.

Features:

• Rebound adjustment independent from compression
• Extra large adjustment range
• 12 clicks low speed compression
• 21 clicks high speed compression
• 8 clicks low speed rebound
• 15 clicks high

The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ 14 31 dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility.  Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.  Our newest motorsport piston has been developed to deliver a smooth and responsive damping characteristic.  To customize track to track setups and tailor the chassis to the driver; the JRZ 14 31 has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamics loads.  The JRZ 14 31 is here to take you to the next level. Dedicated racing cars with experienced drivers deserving of the professional technology JRZ delivers. With valving designed and innovated by JRZ Suspension Engineering. the JRZ 14 31 is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Easy to change damping curves
• Large adjustment range. with fine tuning ability

Learn More

Complete Set of Pistons
Bore : 100mm
C/D : 30.7mm
Comp Ratio : 8.5:1
Dome CC : -17.3
Gram Weight : N/A
Head CC : 57.0
Oversized : 0.50
Rod : 130.5mm
Skirt Type : Full Round
Stroke : 79mm

JE Time Attack FSR Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JC4404-3938
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore100mm - C/D30.7mm - Comp Ratio8.5:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Dry Carbon Hoods are the latest evolution of the SEIBON product offering.
Super light weight. extremely strong and ready to accept all factory mounts and accessories. Dry Carbon Hood
OEM Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :-
Dry Carbon Hood
OEM Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Learn More