Search results for '1'
-
$745.00For: Subaru Forester YR: 2004-2006 Cyl: 4 App: 2.5L 5-SHPeed 4WD
The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs. Learn More -
$980.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges. latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods.
All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on. it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood
CW Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood
CW Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255,EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$3,304.00Cosworth MaxSport brake kits feature lightweight machined hard anodized fully forged calipers. They engineered to provide a 20-percent reduction in weight without sacrificing stiffness or performance over standard Sport kit.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Hats brackets CNC machined to standards. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
20% reduction in weight over Cosworth Sport calipers
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$265.00Mishimoto's developed a new line of performance aluminum fan shroud kits. The Mishimoto fan shroud kits are a direct OEM fit and include Mishimoto slim electric fans. All Mishimoto aluminum fan shrouds are significantly lighter and more durable than standard OEM shrouds. They will notably improve engine cooling performance by delivering more air to the radiator and driving out excess heat. Importantly; Mishimoto fans shroud kits will safely secure the fan blades from potentially damaging other vital engine components. Learn More -
$615.00For: Subaru Forester YR: 2004-2005 Cyl: 4 App: 2.5L 5-SHPeed Turbo
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More -
$540.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Front Lips are designed to replace your factory lip (if equipped) or be added to your stock front end for a subtle and stylish look. In addition. many front lips add additional air ducting and down force to the front of your vehicle for added performance.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Front Lip
PV Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Front Lip
PV Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Learn More -
$12,112.00The Cosworth Subaru EJ25 CS600 series is designed extreme track use the demanding performance enthusiast. Each assembly is precision built by of Cosworths skilled craftsmen using finest components from parts catalog to ensure maximum reliable power performance. Starting with a Subaru EJ257 semi closed deck block; we meticulously hone each bore to guarantee perfect piston to cylinder wall clearance. block is then assembled with Forged Pistons; motorsport grade Forged H Beam connecting rods along with high performance and main bearings a STI Forged crankshaft. maximum performance; an optional steel billet crank is available (CS600X). Once cylinder block assembly is completed; we install a pair of CNC machine port-bored Valve Cylinder heads with proven S2 camshafts complete with valve lash to specifications. cylinder heads secured with high performance 11mm steel studs sealed with a Cosworth high performance stopper layer steel head gasket. Finally; we install of blue-printed; high pressure pumps maximum lubrication. This proven engine combination been used by teams to events in both North Americaand Europe.
Key Features
New Subaru EJ25 engine
New Subaru EJ25 Forged Crankshaft
Optional Billet Cosworth Crankshaft (CS600X)
Cosworth Forged H-beam Connecting Rods
Cosworth Forged Pistons rings
Cosworth motorsport Tri-metal bearings
Balanced to within gram
Complete blue-print assembly
Enlarged Intake Exhaust ports
Large diameter stainless steel intake valves
Large diameter Inconel exhaust valves
Hi Rev; Dual valve springs
Titanium Retainers
Hardened Steel spring platforms.
Multi angle valve job
CNC Machined port finish
Knife edge port divider
Cosworth S2 High lift camshafts
Valve lash set
Cosworth high pressure pump
Cam covers
Cosworth serial number Learn More -
$728.00For a good balance of price and performance; Invidia offers the motorsport enthusiasts a strong line-up of Invidia N1 Exhausts. Each Invidia Exhaust is constructed with high quality SUS304 Stainless Steel; CNC-machined flanges; and manufactured with a polished finish. Each system features mandrel-bent stainless steel Piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains; as well as an increase in horsepower and torque. Racing Exhaust
Single Titanium TIP
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255;EJ257
Vehicle Interior Options :- ALL Aspiration: T
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Piping 76mm - TIP 101mm Ti Learn More -
$800.00For: Subaru WRX Sti YR: 2004-2011 Cyl: 4 App: 2.5L Turbo 6-SHPeed
The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for. Learn More -
$300.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Front Grilles are designed to replace your factory grille for a subtle and stylish look. In addition. many front grilles add additional air ducting for added performance.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Grille
CW Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Grille
CW Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Learn More