Search results for 'Subaru 2008 - 2010'
-
$980.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges. latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods.
All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on. it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood
RC Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood
RC Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Learn More -
$780.00For a strong boost in power; the Invidia Down Pipe offers an alternative to other power-boosting enhancements. To see just how much power the Invidia Downpipe can produce; a quick look at its dyno chart shows it easily added several horsepower to the stock exhaust system. Each Invidia Downpipe features a large 4 inch Stainless Steel bellmouth to enhance power by freeing excess gas. The Invidia Downpipe sports a one-piece design; eliminating the need for the stock catalytic converter. In addition; each Invidia Downpipe can be bolted up to any Invidia Exhaust or a stock exhaust for an easy installation. Downpipe
Divided Wastegate
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Piping 76mm Learn More -
$845.00For: Subaru WRX Sti YR: 2004-2011 Cyl: 4 App: 2.5L Turbo 6-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$540.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Front Lips are designed to replace your factory lip (if equipped) or be added to your stock front end for a subtle and stylish look. In addition. many front lips add additional air ducting and down force to the front of your vehicle for added performance.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Front Lip
GC Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Front Lip
GC Style
Engine :-
Aspiration :- ALL
Vehicle Engine Options :- ALL
Vehicle Interior Options :- ALL Aspiration: ALL
Vehicle Exterior Options :- Fuel: ALL-ALL
Cylinder Type :-
Vehicle Options :- Learn More -
$916.00If performance is what you are seeking; the Invidia G200 Exhaust Delivers. Each G200 Exhaust features a super-strength titanium TIP with an expanded TIP size to maximize exhaust air flow. On top performance; the colored titanium TIP gives the G200 Exhaust an aggressive look. The Invidia G200 Exhaust is the latest of top-end Invidia Exhausts. G200 Exhaust
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205;EJ255;EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Piping 76mm - TIP 125mm Ti Learn More -
$635.00For: Subaru WRX YR: 2002-2005 Cyl: 4 App: 2.0L Turbo 5-SHPeed
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More -
![K&N Typhoon Short Ram Intake Kit [Subaru Legacy]](http://www.aqmotorsports.com/media/catalog/product/cache/1/small_image/300x/17f82f742ffe127f42dca9de82fb58b1/1/0/103b9bcc-492b-4b03-a3f6-1576cacd7d60.jpg)
$277.99Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles). Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.
- Designed for increased performance for your sport compacts. utilizing the finest quality components
- Guaranteed to Provide more horsepower and increased acceleration
- Available in high-quality finishes
- Includes K&N High-Flow. Washable/Reusable Air Filter
- Some applications available in cold-air versions
- Easy to Install
- Million Mile Limited Warranty
- Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)
Typhoon Short Ram Intake Kit
Item Also Has International Applications
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$548.00COMPETITION CLUTCH
Stage 4 Sprung - Strip Series 1620 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1620 Series kit includes a performance pressure plate; a six puck high torque sprung disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$598.00For: Subaru Impreza RS YR: 1994-1995 Cyl: 4 App: 1.8L 4WD
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$3,278.20To form the ultimate Stroker Kit use with Brian Crower Crankshafts with the corresponding connecting rod and piston combination. The Brian Crower stroker kit delivers a system matched setup that installs correctly the first time.
Although specific differ from kit to kit; you can be sure each Brian Crower Stroker Kit incorporates a larger stroke; steel billet crankshaft not a reworked OEM crank; custom forged aluminum pistons; premium alloy wrist pins; full ring pack; 4340 steel billet connecting rods w/ARP fasteners; and ACL Bearings. All this equals a fully balanced system; ready to install; for some big time power and torque gains. Learn More