Search results for 'I take'
-
$1,700.00For: Mitsubishi Lancer YR: 1992-1995 Cyl: 4 App: 2.0L Turbo Evo 1-3
Clutch Masters 725/850 Series: Ultra High Performance Twin Disc Street or Race Systems; 300-600% increase in holding capacity Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. *725 SERIES – (7.25” Twin Disc) The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. *850 SERIES – (8.50” Twin Disc) The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load. All systems include: * Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel* * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts Learn More -
$43.00Cosworth Performance Filters constructed from a proprietary synthetic; woven single layer; pleated polyester filter media that requires no oiling. an OE like fit; filter housing is injected molded from High Impact Polystyrene or Polypropylene Each Cosworth filter been engineered to the vehicles original box providing a true cold supply to engine. Cosworth Performance Filters also provide increased flow when compared to original equipment filters.
Features
Improved performance
Superior filtration
Exceptional dust holding capacity
Reduced restriction (10%+ compared to OE filters)
Over efficiency Learn More -
$655.00Cosworth's been engineering camshafts nearly 50 years. That coupled with years of innovative multi valve cylinder head design ensures camshaft designs the most efficient in providing maximum usable power across widest power band. Each is ground from a billet finished using same procedures we in extreme level race engines. Cosworth camshafts the perfect compliment to CNC Ported Valve Cylinder heads. cams profiled to increase boost response thereby increasing engine torque power are fully compatible with CNC Ported Valve Cylinder Heads.
Key Features
Ground from billets
Engineered tested profiles
Broad power band
Compatible with Cosworth ported Valve Cylinder Heads Learn More -
$545.00For: Mitsubishi Lancer YR: 2004-2006 Cyl: 4 App: 2.4L Ralliart
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$995.00The SP line of GReddy Exhaust systems has set the benchmark for bolt-on; Street Performance: with style; sound; fitment; power and quality since 1994. The SP Elite; is GReddys latest version of this full stainless-steel legacy. Similar in style to the Spectrum Elite line; the SP Elitses a larger high flow piping; straight-through oval muffler(s) and resonated angled tip(s) for a sporty; yet refine exhaust note. However the SP Elite; has a more standard finished polished tip; stamp strengthen end caps and un-embossed muffler body; resulting in more affordable; more subtle; Sport Performance Exhaust. Learn More -
$114.00Manufactured in UK; Cosworth brake pads feature a 1.5mm granulated inter-layer which only serves to as a shock absorber; helping to reduce stress on rotor surface triples bonding strength; diminishing edge lifting. To reduce bedding-in or seating-in time - this is time it takes the and disc to adapt to each other - Cosworth brake pads heat seared. This process heats friction material to in excess of degrees toasting surface ; greatly enhancing performance first time that driver applies brakes. Scorching pads also significantly reduces initial fading - fading increases necessary force pressure required to maintain deceleration of vehicle. Cosworth's brake range offers exceptional performance without compromise. Learn More -
![JE Pistons - Mitsubishi Lancer Evolution MR YR: 2008-2011 [PN# 296904] MITSU 4B11T KIT](http://www.aqmotorsports.com/media/catalog/product/cache/1/small_image/300x/17f82f742ffe127f42dca9de82fb58b1/7/4/7430ad8c-7fa6-4497-8e74-deef04002157_1.jpg)
$1,078.32Complete Set of Pistons
Bore : 86mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -5.0
Gram Weight : 320
Head CC : 50.5
Oversized : STD
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm
JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3386
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86mm - C/D33.35mm - Comp Ratio9.0:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More -
$980.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges. latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods.
All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on. it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood
TS Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood
TS Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$548.00COMPETITION CLUTCH
Stage 4 Sprung - Strip Series 1620 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1620 Series kit includes a performance pressure plate; a six puck high torque sprung disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$660.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Front Lips are designed to replace your factory lip (if equipped) or be added to your stock front end for a subtle and stylish look. In addition. many front lips add additional air ducting and down force to the front of your vehicle for added performance.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Front Lip
VR Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Front Lip
VR Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More