Search results for: 'turbo'

GReddy Exhaust - Comp Ti-C for Mitsubishi Lancer Evolution 2003-2006

$850.00

For full on competition use only; we now offer the turbo-back Comp Ti-C series. These are full race turbo applications which include a large racing dowpipe to replace the factory catalytic converters at the race track. The Comp Ti-C is for off-road use only. (usually 80mm) Learn More

JE Pistons - Mitsubishi Lancer Evolution GSR YR: 2008-2011 [PN# 296905] MITSU 4B11T KIT

$1,078.32

Complete Set of Pistons
Bore : 86.5mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -6.2
Gram Weight : 324
Head CC : 50.5
Oversized : 0.5
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm

JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3405
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86.5mm - C/D33.35mm - Comp Ratio9.0:1 - Dome C
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

JE Pistons - Mitsubishi Lancer Evolution MR YR: 2008-2011 [PN# 296904] MITSU 4B11T KIT

$1,078.32

Complete Set of Pistons
Bore : 86mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -5.0
Gram Weight : 320
Head CC : 50.5
Oversized : STD
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm

JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3386
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86mm - C/D33.35mm - Comp Ratio9.0:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

JE Pistons - Mitsubishi Lancer Evolution GSR YR: 2008-2009 [PN# 284801] MITSU 4B11T 9:1 KIT

$1,101.00

Complete Set of Pistons
Bore : 86.5mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -6.2
Gram Weight : 340
Head CC : 50.5
Oversized : 0.5mm
Rod : 143.76mm
Skirt Type : Full Round
Stroke : 86mm

JE Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Recommended RingSet: JG1004-3405
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86.5mm - C/D33.35mm - Comp Ratio9.0:1 - Dome C
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

JE Pistons - Mitsubishi Lancer Evolution MR YR: 2008-2009 [PN# 284800] MITSU 4B11T 9:1 KIT

$1,101.00

Complete Set of Pistons
Bore : 86mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -5
Gram Weight : 336
Head CC : 50.5
Oversized : STD mm
Rod : 143.76mm
Skirt Type : Full Round
Stroke : 86mm

JE Pistons
For Turbo and Nitrous Aps
Set of 4 Pistons
Recommended RingSet: JG1004-3386
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86mm - C/D33.35mm - Comp Ratio9.0:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

JE Pistons - Mitsubishi Lancer YR: 2002-1992 [PN# 208478] MITSU 2.0 DISH KIT

$1,078.32

Complete Set of Pistons
Bore : 85.5mm
C/D : 1.367mm
Comp Ratio : 8.5:1
Dome CC : -13.2
Gram Weight : 317
Head CC : 47
Oversized : 0.5mm
Rod : 150mm
Skirt Type : Full Round
Stroke : 88mm
6Bolt Crank
JE Pistons
For Turbo and Nitrous Aps
21mm Pin Diameter
Set of 4 Pistons
Recommended RingSet: JG2704-3366
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore85.5mm - C/D1.367mm - Comp Ratio8.5:1 - Dome C
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More

K&N Typhoon System Complete Cold Air MITSUBISHI LANCER EVO L4-2.0L TURBO 08-09

$401.99

Built for performance and show. the Typhoon^® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles). Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

K&N Cool Air Intake Kit

Designed for increased performance for your sport compacts. utilizing the finest quality components
Guaranteed to Provide more horsepower and increased acceleration
Available in high-quality finishes
Includes K&N High-Flow. Washable/Reusable Air Filter
Some applications available in cold-air versions
Easy to Install
Million Mile Limited Warranty
Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

Typhoon Complete Cold Air Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- ColorWrinkle Red Learn More

K&N Typhoon System Cold Air MITSUBISHI LANCER EVOLUTION IX L4-2.0L TURBO 2006

$297.99

Built for performance and show. the Typhoon^® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles). Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.

K&N Cool Air Intake Kit

Designed for increased performance for your sport compacts. utilizing the finest quality components
Guaranteed to Provide more horsepower and increased acceleration
Available in high-quality finishes
Includes K&N High-Flow. Washable/Reusable Air Filter
Some applications available in cold-air versions
Easy to Install
Million Mile Limited Warranty
Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)

Typhoon Cold Air Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

Clutch Masters 05110-HRTZ Mitsubishi Lancer FX300 Clutch Kit

$899.00

For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More

Clutch Masters 05110-HRKV Mitsubishi Lancer FX200 Clutch Kit

$899.00

For: Mitsubishi Lancer YR: 2008-2010 Cyl: 4 App: 2.0L Turbo Evo X 5spd
The FX200 System uses the Power Plus I Pressure Plate and a Steel Backed Kevlar disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque rating and holding capacity as the FX100, however, its life expectancy is increased with the Kevlar disc. Our Kevlar friction material is non-abrasive and doesn't score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer. Minimum 500 Required break in miles. Please see The Technical guide for more details Learn More

Search results for 'turbo'