Search results for 'cosworth stroker kit 2.6l'
-
$571.00COMPETITION CLUTCH
Stage 5 Rigid - Strip Series 0420 Clutch KitThis assembly; available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0420 Series kit includes a performance pressure plate; a four puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$548.00COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$331.00COMPETITION CLUTCH
Stage 2 - Street Series 2100 Clutch KitThis assembly provides up to 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300 mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).
The 2100 Series kit includes a performance pressure plate; a high torque sprung disc with antiburst steel backed Brass Plus facings; all applicable bearings; and the appropriate alignment tool.
Learn More -
$355.00COMPETITION CLUTCH
Stage 5 Rigid - Strip Series 0420 Clutch KitThis assembly; available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0420 Series kit includes a performance pressure plate; a four puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$66.00Cosworth Thermal Composite Gaskets Learn More -
$3,599.00Increased engine performance often means increased engine speed load. Original factory crankshafts not be able to withstand added stress; resulting in catastrophic failure. Cosworth billet crankshafts machined from ultra strong EN40B steel; engineered to endure harshest condits have been tested to withstand over 1;000HP.
Key Features
Superior lubrication
Profiled counterweights
High strength
Light weight Learn More -
$399.00Cosworth's been engineering camshafts nearly 50 years. That coupled with years of innovative multi valve cylinder head design ensures camshaft designs the most efficient in providing maximum usable power across widest power band. Each is ground from a billet finished using same procedures we in extreme level race engines. Cosworth camshafts the perfect compliment to CNC Ported Valve Cylinder heads. cams profiled to increase boost response thereby increasing engine torque power are fully compatible with CNC Ported Valve Cylinder Heads.
Key Features
Ground from billets
Engineered tested profiles
Broad power band
Compatible with Cosworth ported Valve Cylinder Heads Learn More -
$43.00Cosworth Performance Filters constructed from a proprietary synthetic; woven single layer; pleated polyester filter media that requires no oiling. an OE like fit; filter housing is injected molded from High Impact Polystyrene or Polypropylene Each Cosworth filter been engineered to the vehicles original box providing a true cold supply to engine. Cosworth Performance Filters also provide increased flow when compared to original equipment filters.
Features
Improved performance
Superior filtration
Exceptional dust holding capacity
Reduced restriction (10%+ compared to OE filters)
Over efficiency Learn More -
![JE Pistons - Mitsubishi Lancer Evolution MR YR: 2008-2011 [PN# 296904] MITSU 4B11T KIT](http://www.aqmotorsports.com/media/catalog/product/cache/1/small_image/300x/17f82f742ffe127f42dca9de82fb58b1/7/4/7430ad8c-7fa6-4497-8e74-deef04002157_1.jpg)
$1,078.32Complete Set of Pistons
Bore : 86mm
C/D : 33.35mm
Comp Ratio : 9.0:1
Dome CC : -5.0
Gram Weight : 320
Head CC : 50.5
Oversized : STD
Rod : 143.75mm
Skirt Type : Full Round
Stroke : 86mm
JE Time Attack FSR Pistons
Must Sleeve Block
For Turbo and Nitrous Aps
Set of 4 Pistons
Included RingSet: JG1004-3386
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Bore86mm - C/D33.35mm - Comp Ratio9.0:1 - Dome CC-
JE Pistons are specifically engineered for extreme applications up to. and including. professional competition. In this environment. higher compression ratios. extreme boost levels and heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy found in every JE Piston.
*Application Specific Forgings for an Optimized. Uniform Crown Thickness
*Contact Reduction Groove to Minimize Frictional Drag
*Accumulator Groove for Increased Top Ring Stability and Sealing
*CNC-Machined Side Relief with Lower Support Band for Additional Skirt Strength
*Honed Pin Bores. Double Pressure Fed Pin Oilers and Wire Locks Included
*JE ProSeal Piston Rings are included with your JE Pistons
JE Pistons are sold as matched sets.
*Custom Applications are also Available Learn More -
$4,220.00JRZ Suspension Engineering is proud to introduce the JRZ RS1. a revolutionary development in multipurpose high performance damping. Applying our race winning technology. JRZ designed the JRZ RS1 to give ultimate comfort for public roads and precise chassis control when driving on track.
The JRZ RS1 is a high gas pressure. single adjustable monotube damper. The canister has been designed inside of the damper. JRZ inner canister technology gives the advantages of monotube canister dampers without the mounting concerns and complexity. Easy to install. the JRZ RS1 is available as a complete kit with mounting hardware and springs for all applications we support.Built on the same roduction line and sharing components with our pro racing applications. the JRZ RS1 is of true professional heritage. Following JRZ’s design philosophy. the JRZ RS1 has a large 22mm diameter piston rod in strut applications and a 16mm diameter piston rod in aluminium damper applications. The large piston rod magnifies the high pressure gas charge which means great chassis control without using a high spring rate or increasing harshness.
Features- 22 mm rod strut. 16 mm rod damper
- 24 clicks of rebound
- Adjustable gas pressure. mono tube
- Piston designed for high performance
- Large adjustment range
Benefits- Easy to use and bolt-in
- Street ride. racing performance
- Extra long product life
- One adjustment for complete control of ride and handling
- Professional racing quality
- Daily driving
- Drivers education (DE) events and track days
- Club racing