Search results for 'Evo x catback'
-
$946.00The connecting is vital link between piston power. When engine output is increased; demands placed on connecting increase as well. To ensure engine reliability in condits; original connecting rods should be replaced with heavy duty specification parts. Cosworth Forged Connecting Rods manufactured from high strength 4340 (EN24) steel machined to exacting tolerances.
Key Features
Strong; light weight H-beam design
Heavy duty bolt (260;000psi)
Manufactured from 4340 (EN24) steel
Small bushed floating pin Learn More -
$840.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Trunks and Hatches are designed to replace your factory trunk or hatch and accept all hinges. handles. glass and locks for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Trunks and Hatches.
OEM Style guarantees your SEIBON Carbon Fiber Trunk will look just like factory. No additional fins. ducting or alterations from stock aesthetics.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Trunk/Hatch
OEM Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Trunk/Hatch
OEM Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$960.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges. latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods.
All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on. it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood
VSII Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood
VSII Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$676.00For a good balance of price and performance; Invidia offers the motorsport enthusiasts a strong line-up of Invidia N1 Exhausts. Each Invidia Exhaust is constructed with high quality SUS304 Stainless Steel; CNC-machined flanges; and manufactured with a polished finish. Each system features mandrel-bent stainless steel Piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains; as well as an increase in horsepower and torque. N1 Exhaust
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Piping 76mm - TIP 101mm Learn More -
$1,080.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Fenders are designed to replace your factory fenders and accept all lighting. molding and wheel wells for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Fenders.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$2,540.00Cosworth Sport brake kits feature fully forged calipers optimal strength light weight. bolt in bridge design allows a super stiff caliper without sacrificing cooling. end result is better performance with less vibration; noise; pad taper.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA to standards.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$3,812.00Cosworth MaxSport brake kits feature lightweight machined hard anodized fully forged calipers. They engineered to provide a 20-percent reduction in weight without sacrificing stiffness or performance over standard Sport kit.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Hats brackets CNC machined to standards. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
20% reduction in weight over Cosworth Sport calipers
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$5,415.00Cosworth stroker kits the perfect to displacement; torque power to your engine. Each includes select matched components from parts list ensuring reliable performance.
Mitsubishi 4B11 (Evolution X) 2.2L
Cosworth Forged Pistons (86mm)
Cosworth Fully Counterweighted Billet Crankshaft (94mm)
Cosworth Forged Connecting Rods
Cosworth'ston Rings
Mitsubishi 4G63 (Evolution VII-IX) 2.2L
Cosworth Forged Pistons (86mm)
Cosworth Fully Counterweighted Billet Crankshaft
(94mm)
Forged Cosworth Connecting Rods
Cosworth and Main Bearings
Cosworth'ston Rings
Subaru EJ25 2.6L
Cosworth Forged Pistons (99.5mm)
Cosworth Fully Counterweighted Billet Crankshaft
(81mm)
Forged Cosworth Connecting Rods
Cosworth and Main Bearings
Cosworth'ston Rings Learn More -
$824.00The piston is of most important components within engine. It be subjected to directional change up to times every second must withstand acceleration forces of 8500gs. Cosworth high performance forged pistons designed engineered to withstand this type of punishment still perform. Cosworth's pistons manufactured using same methods as Formula pistons include features such anti scuff skirt coating; ultra-strong pins; polished and patented antidetonation bands. Additionally; each application uses a unique forging to minimize weight ensure strongest possible piston design.
Key Features
Unique forgings each application
Xylan anti scuff skirt coating
Polished tops (reduces carbon build up relieves stress)
Manufactured from proprietary alloy (CosAl 010)
Ultra strong pin
Patented anti-detonation bands Learn More -
$43.00Cosworth Performance Filters constructed from a proprietary synthetic; woven single layer; pleated polyester filter media that requires no oiling. an OE like fit; filter housing is injected molded from High Impact Polystyrene or Polypropylene Each Cosworth filter been engineered to the vehicles original box providing a true cold supply to engine. Cosworth Performance Filters also provide increased flow when compared to original equipment filters.
Features
Improved performance
Superior filtration
Exceptional dust holding capacity
Reduced restriction (10%+ compared to OE filters)
Over efficiency Learn More