Search results for 'the'
-
$114.00Manufactured in UK; Cosworth brake pads feature a 1.5mm granulated inter-layer which only serves to as a shock absorber; helping to reduce stress on rotor surface triples bonding strength; diminishing edge lifting. To reduce bedding-in or seating-in time - this is time it takes the and disc to adapt to each other - Cosworth brake pads heat seared. This process heats friction material to in excess of degrees toasting surface ; greatly enhancing performance first time that driver applies brakes. Scorching pads also significantly reduces initial fading - fading increases necessary force pressure required to maintain deceleration of vehicle. Cosworth's brake range offers exceptional performance without compromise. Learn More -
$545.00For: Mitsubishi Lancer YR: 2004-2006 Cyl: 4 App: 2.4L Ralliart
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$860.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges. latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods.
All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on. it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood
EVO Style
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- N/A
Vehicle Interior Options :- L4 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood
EVO Style
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- N/A
Vehicle Interior Options :- L4 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$536.00COMPETITION CLUTCH
Stage 3 - Street/Strip Series 2600 Clutch KitThis segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life.
The 2600 Series kit includes a performance pressure plate; a high torque sprung disc with segmented Ceramic facings; all applicable bearings; and the appropriate alignment tool.
Learn More -
$2,600.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Doors are designed to replace your factory doors and accept all hinges. handles. glass and locks for 100% Bolt On fitment. Cut weight in style with Seibon Doors.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionFront
Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- ALL
Vehicle Interior Options :- L4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionFront Learn More -
$548.00COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch KitThis assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$1,960.04Brian Crower billet cranks are CNC machined on state-of-the-art mills from round bar; premium 4340 chromoly steel to ensure the strongest possible shaft available. Each Brian Crower crankshaft is nitrided for added longevity and feature large radius journals for added strength at high horsepower. Each and every Brian Crower Crankshaft is 100% inspected to a tolerance of .02mm.
All Brian Crower crankshafts are machined on the latest CNC equipment to guarantee accuracy; reliability and overall consistency. When you purchase a Brian Crower crankshaft; you can be assured its made with the finest steel alloy; employing only the best machining; heat treating and finishing procedures; in stock at a very affordable price. Learn More -
$343.00COMPETITION CLUTCH
Stage 3 - Street/Strip Series 2600 Clutch KitThis segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life.
The 2600 Series kit includes a performance pressure plate; a high torque sprung disc with segmented Ceramic facings; all applicable bearings; and the appropriate alignment tool.
Learn More -
$0.00AEM's Plug & Play Engine Management System (EMS) plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. An integrated tuning wizard allows users to create a base map specifically for a car’s configuration, regardless of what type of injectors, sensors, coils or other changes have been made. The AEM EMS's infinitely adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.
- Installs in minutes using Plug & Play technology—no wiring necessary!
- Start-up calibrations included
- Live help window eases tuning process
- Set-up Wizard creates a custom base map for your car
- System is fully enabled—Never pay for upgrades!
- Free software updates on aempower.com
- Uses all the factory sensors
- Runs on Windows compatible software
- Fuel table automapping
- Programmable traction control
- Onboard 512kb datalogger
- Up to 10 cylinder sequential fuel injection
- 16 general-purpose outputs
- 7 definable switch inputs
- Electronic boost control
- Soft cut rev limiters
- Two step launch control
- Wet or dry nitrous control
- Definable knock control
- Full idle control
- 4 EGT inputs with fuel control
- 16/32 hybrid high speed processor
Fits EVO 9 see other model for EVO 8
Vehicle warranty and legality of use: Installing this performance part(s) on your vehicle may void the vehicles warranty may not meet your states legal requirements for use on public roads (emissions, noise etc – Please check your state law if uncertain). For more information on the sale of performance parts from this site, please read our Terms and Conditions.
Please note:All Prices are subject to change due to exchange rates & price alterations from suppliers.
Learn More
For more information please click here -
$355.00COMPETITION CLUTCH
Stage 5 Rigid - Strip Series 0420 Clutch KitThis assembly; available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 0420 Series kit includes a performance pressure plate; a four puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More
