Search results for 'I take'
-
![K&N Typhoon Cold Air Intake Kit [Mitsubishi Lancer]](http://www.aqmotorsports.com/media/catalog/product/cache/1/small_image/300x/17f82f742ffe127f42dca9de82fb58b1/9/8/989f4c39-30ef-4244-9cec-4d5ea3e3d702_3.jpg)
$294.99Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles). Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.
- Designed for increased performance for your sport compacts. utilizing the finest quality components
- Guaranteed to Provide more horsepower and increased acceleration
- Available in high-quality finishes
- Includes K&N High-Flow. Washable/Reusable Air Filter
- Some applications available in cold-air versions
- Easy to Install
- Million Mile Limited Warranty
- Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)
Typhoon Cold Air Intake Kit
Engine :-
Aspiration :- Naturally Aspirated
Vehicle Engine Options :- 4B11
Vehicle Interior Options :- L4 Aspiration: N
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$355.00COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$79.39Brian Crower Spring and Retainers
Valvesprings
Designed for high rpm; Brian Crower valve springs are wound from only the highest grade; super clean; chrome silicone alloy and feature proprietary processing procedures (chamfer; debur; etc) for consistent pressures over long term; high rpm usage. Quality valve springs are critical in the prevention of premature valve float.
Retainers
The ultimate in lightweight high performance; Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances.
Spring/Retainer Kits
Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpms and allow for greater lift camshafts for added performance and reliability.
Keepers/Locks
Spring Seats Learn More -
$167.00Cosworth High Performance Head Gaskets engineered to seal in power under most demanding condits. Constructed from stainless steel with a folded stopper layer; each application features superior sealing compared to conventional multi layer steel gaskets. Additionally; Cosworth High Performance Head Gaskets manufactured from pre-coated cut stainless steel resulting in uniform coating distribution consistent shape.
Key Features
Individual cut layers of stainless steel with superior consistency compared to laser gaskets
Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or areas
Manufacturing dimensional tolerance of 0.001
Die manufacturing process ensures smooth edges; unlike laser gaskets
Cosworth's gaskets feature a folded stopper layer additional torque around each cylinder. width of sealing area is specific each application thereby providing ultimate sealing properties
Available in a range of thicknesses specific applications Learn More -
$0.00AEM High Volume Fuel Rail Kit. High quality black anodized aluminum rail. Fits all 2003-2006 EVO VIII and IX models.
Kit Includes:
- Fuel Rail
- Injector O-Rings
- Pipe Plug
- Detailed Instructions
Please note:All Prices are subject to change due to exchange rates & price alterations from suppliers.
For more information please click here Learn More -
$3,812.00Cosworth MaxSport brake kits feature lightweight machined hard anodized fully forged calipers. They engineered to provide a 20-percent reduction in weight without sacrificing stiffness or performance over standard Sport kit.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Hats brackets CNC machined to standards. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
20% reduction in weight over Cosworth Sport calipers
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$850.00For: Mitsubishi Lancer YR: 2001-2007 Cyl: 4 App: 2.0L Turbo Evo 7-9
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More -
$824.00The piston is of most important components within engine. It be subjected to directional change up to times every second must withstand acceleration forces of 8500gs. Cosworth high performance forged pistons designed engineered to withstand this type of punishment still perform. Cosworth's pistons manufactured using same methods as Formula pistons include features such anti scuff skirt coating; ultra-strong pins; polished and patented antidetonation bands. Additionally; each application uses a unique forging to minimize weight ensure strongest possible piston design.
Key Features
Unique forgings each application
Xylan anti scuff skirt coating
Polished tops (reduces carbon build up relieves stress)
Manufactured from proprietary alloy (CosAl 010)
Ultra strong pin
Patented anti-detonation bands Learn More -
$25.00Engine bearings one of most vital components within an engine are often overlooked when considering high performance upgrades. Performance engineered; multi-layer bearings generate less heat than normal bearings by reducing friction. Cosworth Race bearing sets feature a unique combination of design; metallurgy engineering to deliver performance in extreme condits. Cosworth Race bearings setsare available in sizes to accommodate most applications. Size 1 bearings a nominal standard size are used most applications. Size 2 bearings feature an additional .001 clearance should be used
when extra clearance is required.
Key Features
High strength overlay plate with reduced thickness better control less friction
Hardened steel backing on connecting bearings
Increased crush better retention
3/4 grooving on Main Bearings providing optimum supply
Tight consistent wall tolerances
Oversize chamfers where applicable
Flash plating eliminated improved heat transfer
Tested to over 1000 horsepower! Learn More -
$565.00For: Mitsubishi Lancer YR: 1992-1995 Cyl: 4 App: 2.0L Turbo Evo 1-3
The FX200 System uses the Power Plus I Pressure Plate and a Steel Backed Kevlar disc. This clutch is designed for the street enthusiast or weekend racer. The FX200 offers similar torque rating and holding capacity as the FX100, however, its life expectancy is increased with the Kevlar disc. Our Kevlar friction material is non-abrasive and doesn't score the mating surfaces. It features only slightly increased pedal pressure, significantly longer life than stock, and normal clutch feel during engagement and disengagement for the smoothest operation of any stage we offer. Minimum 500 Required break in miles. Please see The Technical guide for more details Learn More