Search results for 'dw fuel'

Designed to Increase HP and Acceleration Engineered to Specific Vehicle Design Easy to Install. Usually in 90 minutes or less! Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)  Million Mile Limited Warranty Replaces OEM Filter and Air Box Air Filter is Washable and Reusable Works with Original Equipment Manufacturer Computer Systems Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)

HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.

 

BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..

TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.

57i Intakes are not legal for use in California and other US States adopting California emission standards.

57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205.EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

Brian Crower high performance camshafts are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within .02mm. Every Brian Crower camshaft profile has been prototyped and dyno tested for proven horsepower results prior to placed into mass production. By grinding cores in high volume; Brian Crower; Inc. is able to pass the cost savings on to the end user. Quality at an affordable price.
Brian Crower uses small diameter grinding wheels during the finishing phase when applicable to generate a more aggressive ramp rate for a faster cylinder fill rate. More air + more fuel = more power. Although it takes longer to grind the cams; research and development has proven that the inverted radius created by the small grinding wheel on the opening side delivers more horsepower on radius and roller rocker applications than the conventional; large diameter grinding wheels.
All Brian Crower cams are checked on a high speed; sub-micron accuracy measuring gauge. The Adcole Camshaft Measuring System uses individual measuring heads for each cam journal and cam lobe; with .01 micron resolution; taking one datum point each 1/10th of a degree or 3;600 data points per revolution. Measuring camshafts for rise error and chattermark detection; this model can measure 200 parts per hour. Learn More

Cosworths High Flow Intake Systems feature increased diameter; large smooth radius bent aluminum inlet tubes superior flow management coupled with a high flow filter maximum flow performance.
Each includes an integrated heat shield designed to isolate air intake from engine heat delivering cold into engine superior power conversion. filter element is large; conical in shape engineered to dramatically reduce intake restriction resulting in additional power torque.
Specs:
Increase in performance by typically up to 15%
Conical Cosworth blue filter with Cosworth embossed composite cap
Lightweight aluminum mandrel shaped inlet tube maximum airflow
Integrated heat shield cold isolation
Hardware included easy; perfect fit
Reusable filter
Manufactured in USA Learn More

Cosworths High Flow Intake Systems feature increased diameter; large smooth radius bent aluminum inlet tubes superior flow management coupled with a high flow filter maximum flow performance.
Each includes an integrated heat shield designed to isolate air intake from engine heat delivering cold into engine superior power conversion. filter element is large; conical in shape engineered to dramatically reduce intake restriction resulting in additional power torque.
Specs:
Increase in performance by typically up to 15%
Conical Cosworth blue filter with Cosworth embossed composite cap
Lightweight aluminum mandrel shaped inlet tube maximum airflow
Integrated heat shield cold isolation
Hardware included easy; perfect fit
Reusable filter
Manufactured in USA Learn More

Cosworths High Flow Intake Systems feature increased diameter; large smooth radius bent aluminum inlet tubes superior flow management coupled with a high flow filter maximum flow performance.
Each includes an integrated heat shield designed to isolate air intake from engine heat delivering cold into engine superior power conversion. filter element is large; conical in shape engineered to dramatically reduce intake restriction resulting in additional power torque.
Specs:
Increase in performance by typically up to 15%
Conical Cosworth blue filter with Cosworth embossed composite cap
Lightweight aluminum mandrel shaped inlet tube maximum airflow
Integrated heat shield cold isolation
Hardware included easy; perfect fit
Reusable filter
Manufactured in USA Learn More

High Pressure Pump
High performance engines require additional pressure because of increased demand placed upon various components within engine. Cosworth High Pressure Subaru EJ20/EJ25 series pump is modified to increase pressure helping to ensure superior lubrication. Each pump is carefully inspected deburred unobstructed flow. Perfect high performance daily Each includes required mounting hardware seals.
High Volume Pump
Increasing volume will help to prevent bearing damage engine failure. Additionally; sustained High use cause starvation at rod main bearings Cosworth High Volume Subaru EJ20/EJ25 series pump utilizes a completely inner outer 12mm rotor to increase volume by 20%. Suggested applications include drag; track and race use. Each includes required mounting hardware seals. Learn More

JRZ Suspension is proud to offer our Triple Adjustable racing damper. Advancing the design of our Double Adjustable further. the JRZ Triple Adjustable utilizes the same piston design while adding function to the Triple Adjustable canister. Like the Double Adjustable. the Triple Adjustable has a wide adjustment range with precise. even adjustments engineered to enable the chassis tuner to make significant. predictable changes every time.

Compression adjustments are separated into the high speed and low speed piston velocity ranges. This level of adjustment creates an environment for precise tuning. The mono tube Triple Adjustable Damper offers a wide adjustment range allowing the user to tailor the damper to driver. track and vehicle. The JRZ Triple Adjustable Damper is available as a complete kit with springs and mounting hardware. Custom applications are available.

An easy to use system. the Triple Adjustable Damper enables the chassis tuner to achieve the desired mass control and handling with precision.  Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction.
The JRZ standard large 22mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ Triple Adjustable dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility. Our proven piston has been developed to deliver a smooth and responsive damping characteristic. To customize track to tracks setups and tailor the chassis to the driver; the JRZ Triple Adjustable Damper has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamic loads. Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.

Features

• Large adjustment range
• 6 clicks low speed compression
• 14 clicks high speed compression
• 24 clicks rebound
• High response piston
• Precise canister
• Adjustable gas pressure

The JRZ Triple Adjustable takes you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. Valving designed and innovated by JRZ Suspension Engineering. the JRZ Triple Adjustable is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Excellent tyre wear 
• Easy to change configurations

Recommended applications

• Professional racing mandating 3 way adjustment
• Experienced club racing

Learn More

JRZ Suspension Engineering is proud to introduce the JRZ RS1. a revolutionary development in multipurpose high performance damping. Applying our race winning technology. JRZ designed the JRZ RS1 to give ultimate comfort for public roads and precise chassis control when driving on track.
 
The JRZ RS1 is a high gas pressure. single adjustable monotube damper. The canister has been designed inside of the damper. JRZ inner canister technology gives the advantages of monotube canister dampers without the mounting concerns and complexity. Easy to install. the JRZ RS1 is available as a complete kit with mounting hardware and springs for all applications we support.Built on the same roduction line and sharing components with our pro racing applications. the JRZ RS1 is of true professional heritage. Following JRZ’s design philosophy. the JRZ RS1 has a large 22mm diameter piston rod in strut applications and a 16mm diameter piston rod in aluminium damper applications. The large piston rod magnifies the high pressure gas charge which means great chassis control without using a high spring rate or increasing harshness. 
Features

• 22 mm rod strut. 16 mm rod damper
• 24 clicks of rebound
• Adjustable gas pressure. mono tube
• Piston designed for high performance
• Large adjustment range

Utilizing a mono tube design with a high flow piston ensures the smoothest possible ride in normal conditions while the bleed adjustment gives the ability to tune for racing situations. Unlike many other single adjustable suspensions. damping balance is carefully maintained between compression and rebound. This damping balance is critical to maintaining tire contact with the road in addition to controlling the main mass of the vehicle. To satisfy the diverse needs of each driver’s application. the JRZ RS1 has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds. JRZ has designed the JRZ RS1 to give the end user the best possible damper to drive daily. while maintaining the racetrack performance that wins championships. The JRZ RS1 is shipped as a bolt-on kit and always comes with the personal support JRZ is known for. Using the best materials. coatings and aerospace standard manufacturing processes as in our motorsport line; the JRZ RS1 is designed to perform flawlessly. Adjustment is easy to perform and comes with the knowledge base only JRZ provides to his customers.
 
Benefits

• Easy to use and bolt-in
• Street ride. racing performance
• Extra long product life
• One adjustment for complete control of ride and handling
• Professional racing quality

Recommended applications

• Daily driving
• Drivers education (DE) events and track days
• Club racing

Learn More

JRZ Suspension Engineering offers the best high performance club sport damper available today. Combining the best aspects of our JRZ RS and 2-way racing damper. the JRZ RS Pro gives the owner ultimate suspension tuning ability while maintaining compliance for driving on public roads. A mono tube double adjustable damper with adjustable gas pressure. the JRZ RS Pro offers an increased adjustment range allowing the user to tune the car to their further needs. The JRZ RS Pro is available as a complete kit with springs and mounting hardware. Taking club sport performance to the next level. the RS Pro has a remote canister with a digressive blow off system. Digressive blow off allows for a stiff compression valving while maintaining smooth response. The result is a damper that provides ultra solid platform with smooth bump compliance. JRZ standard 22mm piston rods maximize flow to the blow off valve response to great chassis control without using a high spring rate.

Features
• 22 mm rod strut. 16 mm rod damper
• 12 clicks of compression
• 24 clicks of rebound
• Adjustable gas pressure. mono tube
• Piston designed for high performance
• Large adjustment range
• Fixed hoses for easy mounting. available quick disconnect fittings
• Remote reservoir or piggyback canister 
JRZ RS Pro damper kits are available in piggyback configurations or with remote canisters. The canister can be fixed to the damper for ease of installation. To customize track to track setups and tailor the chassis to the JRZ RS Pro has an extra large adjustment range.
Each adjustment is designed to be an even step giving you predictability when making changes. The design of the JRZ RS Pro takes you to the next level. Stiffer cars with higher levels of power demand the control JRZ can supply. With the control of gas pressure charge as well and compression and rebound adjustments. the JRZ RS Pro will get the most out of your high performance car. The JRZ RS Pro is shipped as a bolt on kit with installation instructions and always comes with our world renowned personal service of JRZ.

Benefits
• Better chassis control for higher rate springs/power/ratio
• Street ride. racing performance
• Easy to change configurations

Recommended applications 
• Highly modified Street/DE
• Experienced club racing
• Entry level professional racing Learn More