Search results for 'brake it'

Designed to Increase HP and Acceleration Engineered to Specific Vehicle Design Easy to Install. Usually in 90 minutes or less! Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)  Million Mile Limited Warranty Replaces OEM Filter and Air Box Air Filter is Washable and Reusable Works with Original Equipment Manufacturer Computer Systems Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)

HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.

 

BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..

TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.

57i Intakes are not legal for use in California and other US States adopting California emission standards.

57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More

Mishimoto's developed several silicone couplers which can be used with a variety of pipe sizes and bends. Whether you are looking for a transition; straight or angle; Mishimoto's the perfect silicone couplers for you. Our silicone couplers are made from the same heat resistant embedded fibers as our silicone hose kitso you know they are durable and can withstand the toughest condits! Learn More

For: Subaru WRX YR: 2002-2005 Cyl: 4 App: 2.0L Turbo 5-SHPeed
The FX300 System uses the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. The FX300 features only slightly increased pedal pressure, long life disc and positive engagement. The FX300 is only recommended for the street and not for the track. Minimum 500 Required break-in miles. Learn More

Because factory radiator hoses are made of rubber; they are prone to various damage such as swelling or cracks. The Mishimoto Aluminum Upper Radiator Hoses are CNC mandrel bent and made of high-quality T6 temper aluminum. With three colors to choose from; Mishimoto Aluminum Upper Radiator Hoses offer a colorful; strong; and stylish replacement to your factory rubber radiator hoses. Our aluminum upper radiator hose kits include silicone couplers and t-bolt clamps; with every component backed by an excellent lifetime warranty. Learn More

JRZ Suspension Engineering is proud to offer our newest triple adjustable racing damper. the JRZ 12 31. Building upon the years of success of our original triple adjustable damper. the JRZ 12 31 takes our damping philosophy to the next level. Every adjustment has an increased damping force range with finer adjustments engineered to enable the chassis tuner to make significant predictable changes every time. Compression adjustments are separated into the high speed and low speed piston velocity ranges affecting the bleed and blow off points of the damping curve. All oil flow paths in the JRZ 12 31 have been redesigned to maximize efficiency and give crisp feel to the driver. Rebound valving has been completely redesigned to eliminate influence over compression forces and smooth pressure development. At the heart of the new JRZ 12 31 package is our latest motorsport piston. designed to give increased control over base characteristics. reduce hysteresis. and operate smoother. To ensure that the valving designed into the JRZ 12 31 are the determining forces. JRZ has included new low friction coatings. seals and bearings with this package. Custom applications are available. An easy to use system. the JRZ 12 31 enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction. The JRZ standard large 22 mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate.

Features

• Rebound adjustment independent from compression
• Extra large adjustment range
• 12 clicks low speed compression
• 21 clicks high speed compression
• 24 rebound • High response piston
• Precise canister
• Low friction
• Adjustable gas pressure

JRZ 12 31 dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility. Our newest motorsport piston has been developed to deliver a smooth and responsive damping characteristic.  To customize track to track setups and tailor the chassis to the driver; the JRZ 12 31 has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamic loads. Even with a large range. each adjustment is designed to be small. even steps giving precision and confidence when making changes. The JRZ 12 31 is here to take you to the next level. Dedicated racing cars with experienced drivers deserve the professional technology JRZ delivers. With valving designed and innovated by JRZ Suspension Engineering. the JRZ 12 31 is shipped as a custom configuration always tailored to the customer’s needs. and always comes with our world renowned personal service.

Benefits

• Precise control of the chassis and unsprung masses
• Easy to change damping curves
• Large adjustment range. with fine tuning ability

Learn More

For a good balance of price and performance; Invidia offers the motorsport enthusiasts a strong line-up of Invidia N1 Exhausts. Each Invidia Exhaust is constructed with high quality SUS304 Stainless Steel; CNC-machined flanges; and manufactured with a polished finish. Each system features mandrel-bent stainless steel Piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains; as well as an increase in horsepower and torque. N1 Exhaust
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205;EJ255;EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Piping 76mm - TIP 101mm Learn More

JRZ Suspension Engineering is proud to introduce the JRZ RS1. a revolutionary development in multipurpose high performance damping. Applying our race winning technology. JRZ designed the JRZ RS1 to give ultimate comfort for public roads and precise chassis control when driving on track.
 
The JRZ RS1 is a high gas pressure. single adjustable monotube damper. The canister has been designed inside of the damper. JRZ inner canister technology gives the advantages of monotube canister dampers without the mounting concerns and complexity. Easy to install. the JRZ RS1 is available as a complete kit with mounting hardware and springs for all applications we support.Built on the same roduction line and sharing components with our pro racing applications. the JRZ RS1 is of true professional heritage. Following JRZ’s design philosophy. the JRZ RS1 has a large 22mm diameter piston rod in strut applications and a 16mm diameter piston rod in aluminium damper applications. The large piston rod magnifies the high pressure gas charge which means great chassis control without using a high spring rate or increasing harshness. 
Features

• 22 mm rod strut. 16 mm rod damper
• 24 clicks of rebound
• Adjustable gas pressure. mono tube
• Piston designed for high performance
• Large adjustment range

Utilizing a mono tube design with a high flow piston ensures the smoothest possible ride in normal conditions while the bleed adjustment gives the ability to tune for racing situations. Unlike many other single adjustable suspensions. damping balance is carefully maintained between compression and rebound. This damping balance is critical to maintaining tire contact with the road in addition to controlling the main mass of the vehicle. To satisfy the diverse needs of each driver’s application. the JRZ RS1 has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds. JRZ has designed the JRZ RS1 to give the end user the best possible damper to drive daily. while maintaining the racetrack performance that wins championships. The JRZ RS1 is shipped as a bolt-on kit and always comes with the personal support JRZ is known for. Using the best materials. coatings and aerospace standard manufacturing processes as in our motorsport line; the JRZ RS1 is designed to perform flawlessly. Adjustment is easy to perform and comes with the knowledge base only JRZ provides to his customers.
 
Benefits

• Easy to use and bolt-in
• Street ride. racing performance
• Extra long product life
• One adjustment for complete control of ride and handling
• Professional racing quality

Recommended applications

• Daily driving
• Drivers education (DE) events and track days
• Club racing

Learn More

COMPETITION CLUTCH
Stage 3 - Street/Strip Series 2600 Clutch Kit

This segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life.

The 2600 Series kit includes a performance pressure plate; a high torque sprung disc with segmented Ceramic facings; all applicable bearings; and the appropriate alignment tool.

Learn More

For: Subaru WRX YR: 2006-2011 Cyl: 4 App: 2.5L Turbo 5-SHPeed
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More