Search results for 'Subaru rods'
-
$980.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Hoods are designed to replace your factory hood and accept all hinges. latches and windshield sprayers for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Hoods.
All SEIBON Carbon Fiber Hood should be installed with Hood Pins. Although SEIBON Hoods do bolt-on. it is recommended that vehicles that will be used on street or racing circuits use Hood Pins for additional safety.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Hood
CW Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Hood
CW Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255,EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$560.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Front Lips are designed to replace your factory lip (if equipped) or be added to your stock front end for a subtle and stylish look. In addition. many front lips add additional air ducting and down force to the front of your vehicle for added performance.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Front Lip
OEM Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Front Lip
OEM Style
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$1,080.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Fenders are designed to replace your factory fenders and accept all lighting. molding and wheel wells for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Fenders.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$1,080.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Fenders are designed to replace your factory fenders and accept all lighting. molding and wheel wells for 100% Bolt On fitment. Cut weight in style with SEIBON Carbon Fiber Fenders.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :-
Carbon Fiber Fenders
10mm Wider
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$2,600.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Doors are designed to replace your factory doors and accept all hinges. handles. glass and locks for 100% Bolt On fitment. Cut weight in style with Seibon Doors.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionRear
Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255,EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionRear Learn More -
$2,600.00Flat Rate Shipping: $155 - Please select at checkout.
SEIBON Carbon Fiber Doors are designed to replace your factory doors and accept all hinges. handles. glass and locks for 100% Bolt On fitment. Cut weight in style with Seibon Doors.
All SEIBON Carbon Fiber Products are:
Hand Laid
Wet Carbon Fiber
Clear Gel Coated from the Factory
Inspected Before Shipping Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionFront
Carbon Fiber Doors
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255,EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- PositionFront Learn More -
$317.99Built for performance and show. the Typhoon® Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA). short ram intakes (SR). or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100.000 miles). Some Typhoon Air Intakes are not legal for use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal.
- Designed for increased performance for your sport compacts. utilizing the finest quality components
- Guaranteed to Provide more horsepower and increased acceleration
- Available in high-quality finishes
- Includes K&N High-Flow. Washable/Reusable Air Filter
- Some applications available in cold-air versions
- Easy to Install
- Million Mile Limited Warranty
- Street legal in most states (some not street legal in CA - Check part number or vehicle listing for specific CARB status)
Typhoon Cold Air Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- ColorWrinkle Red Learn More -
$228.99- Designed to Increase HP and Acceleration
- Engineered to Specific Vehicle Design
- Easy to Install. Usually in 90 minutes or less!
- Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)
- Million Mile Limited Warranty
- Replaces OEM Filter and Air Box
- Air Filter is Washable and Reusable
- Works with Original Equipment Manufacturer Computer Systems
- Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)
HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.
BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..
TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.
57i Intakes are not legal for use in California and other US States adopting California emission standards.
57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$238.99- Designed to Increase HP and Acceleration
- Engineered to Specific Vehicle Design
- Easy to Install. Usually in 90 minutes or less!
- Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)
- Million Mile Limited Warranty
- Replaces OEM Filter and Air Box
- Air Filter is Washable and Reusable
- Works with Original Equipment Manufacturer Computer Systems
- Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)
HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too. BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..
TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.
57i Intakes are not legal for use in California and other US States adopting California emission standards.
57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ205.EJ255
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$169.34Brian Crower Spring and Retainers
Valvesprings
Designed for high rpm; Brian Crower valve springs are wound from only the highest grade; super clean; chrome silicone alloy and feature proprietary processing procedures (chamfer; debur; etc) for consistent pressures over long term; high rpm usage. Quality valve springs are critical in the prevention of premature valve float.
Retainers
The ultimate in lightweight high performance; Brian Crower titanium retainers typically weigh in approximately 40% less than the factory OEM steel units. CNC machined for premium 6AL4V titanium bar stock to exacting tolerances.
Spring/Retainer Kits
Brian Crower valve spring and titanium retainers kits are system matched to work in unison to deliver better valve control at extended rpms and allow for greater lift camshafts for added performance and reliability.
Keepers/Locks
Spring Seats Learn More