Search results for 'brake kit'
-
$2,641.00Cosworth Sport brake kits feature fully forged calipers optimal strength light weight. bolt in bridge design allows a super stiff caliper without sacrificing cooling. end result is better performance with less vibration; noise; pad taper.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA to standards.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$2,540.00Cosworth Sport brake kits feature fully forged calipers optimal strength light weight. bolt in bridge design allows a super stiff caliper without sacrificing cooling. end result is better performance with less vibration; noise; pad taper.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA to standards.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$3,304.00Cosworth MaxSport brake kits feature lightweight machined hard anodized fully forged calipers. They engineered to provide a 20-percent reduction in weight without sacrificing stiffness or performance over standard Sport kit.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Hats brackets CNC machined to standards. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
20% reduction in weight over Cosworth Sport calipers
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$2,641.00Cosworth Sport brake kits feature fully forged calipers optimal strength light weight. bolt in bridge design allows a super stiff caliper without sacrificing cooling. end result is better performance with less vibration; noise; pad taper.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA to standards.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$2,031.00Cosworth Sport brake kits feature fully forged calipers optimal strength light weight. bolt in bridge design allows a super stiff caliper without sacrificing cooling. end result is better performance with less vibration; noise; pad taper.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA to standards.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$3,048.00Cosworth Sport brake kits feature fully forged calipers optimal strength light weight. bolt in bridge design allows a super stiff caliper without sacrificing cooling. end result is better performance with less vibration; noise; pad taper.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA to standards.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$1,094.00The Cosworth Subaru High Volume Inlet Manifold is cast from aluminum featuring large tapered runners with radiused inlets improved flow. Plenum volume been substantially increased tuned power. Engineered easy installation is key to making power. Cosworth EJ257 plenum is designed use with 2004-2009 engines equipped with electronic throttle control. plenum is designed use with cable-actuated throttle body EJ20/25 applications. This plenum is designed to replace factory Subaru plenum in vehicles equipped with an aftermarket front-mounted intercooler (FMIC) kit. Throttle body position remains stock; ensuring fitment with brand FMIC kitsigned the stock throttle body intake manifold. 2008-2009 Subaru STIs Cosworth FMIC (p/n 20005378) is highly recommended.
Features
Substantially increased plenum volume
Large; tapered runners with radius inlets
Tuned plenum volume runner length/taper
Over increase in flow
Integral vacuum manifold connection of brake booster; boost gauge; sensor; boost controller; etc.
Will work with standard or forward mount electronic throttle body configurations
Stock throttle body location compatibility with most aftermarket FMIC kits Learn More -
$2,540.00Cosworth Sport brake kits feature fully forged calipers optimal strength light weight. bolt in bridge design allows a super stiff caliper without sacrificing cooling. end result is better performance with less vibration; noise; pad taper.
Cosworth 2-piece rotors designed 10-30% better airflow than directional vaned racing rotors. They were produced with a proprietary cast iron formula; which specified with durability in mind. hats brackets made with a special type of billet aerospace aluminum are machined in USA to standards.
All parts bench tested prior to shipment. Each caliper is 100% pressure tested to 2;500 PSI. Every brake line is 100% pressure tested to 4;500 PSI. Every assembled two-piece rotor is tested runout. Each is optimized specific vehicle application.
Specs:
Bolt-in bridge minimizes caliper compliance
2-piece rotor design allows 10-30% better airflow greatly improving performance
DOT Legal Stainless brake lines with clear abrasion-resistance cover
Piston sizes optimized each vehicle application to maintain bias
DifferenTiAL'ston sizes minimize taper longer life a firmer pedal
Dust boots standard reduced maintenance
All finished parts 100% leak down pressure tested Learn More -
$19.00The Cosworth ECPro is a higher performance solution engine management. Engineered in conjunction with Pectel Control Systems; Cosworth ECPro features an compatible harness connector a full base calibration allowing to go straight to dyno without workload of full and vehicle configuration.
The Cosworth ECPro is perfect demanding applications such as track day; rally motorsport and is housed in a machined from solid aluminum case with professional motorsport specification electronics. />Features
Designed full harness system integration Plug Perform. Base calibration supplied to a stock engine. There is no need replacement of wiring harness or sensors. Makes of dash diff controller
56Mhz processor. Higher performance timing accuracy control Ethernet comms Fast data offload high quality data viewing on PC
Internal logging memory. configured logging channel configuration at optimum rates performance analysis by your dealer. User define specific logging configurations. on board internal memory up to 2;000Hz of logging bandwidth is standard.
Knock monitoring Control. Advanced knock processing chip offers industry leading advanced knock signal filtration signal processing. MIL lamp indication of Detonation levels (witser defined levels based on and Boost).
Calibration select. (e.g. Fuel save; Test; Race) of OEM SI Drive switch selection of 3 alternate calibrations (calibration selectable boost; fuelling; ignition;rev limit; setting; VCAM target; Fly-By-Wire pedal mapping; overrun fuelling cut-off individually selectable Intelligent; Sports; Sports-Sharp).
Pectel (Anti System) switch (cruise control button) used ALS mode select.
Analog Inputs external sensors. Additional pressure transducers; temperature sensors; digital inputs be wired into EC for logging additional engine parameters and/or additional control strategies. number of analog inputs depends on specific model.
Closed Loop Boost Control. Full closed loop or open loop boost control PID parameters solenoid duty cycle map. Closed loop boost levels also selectable calibration select (see above).
Standard Motorsport Design. Machined billet aluminum case professional motorsports specification electronics.
OEM Narrow Band Supported be disabled by user.
External Wideband Supported. Compatible with wideband units with 0-5v analog output.
Internal Wideband Supported. kit Requires Cosworth by Pectel sensor; requires 3 extra populations 2 relocating. blank pins on harness populating.
Variable CAM. Pre-configured full quad camshaft support />External Comms Support. Optional Motorsport dash center differential controller.
Designed Racing OBDII Motorsport us Learn More -
$9,760.00JRZ Suspension is proud to offer our Triple Adjustable racing damper. Advancing the design of our Double Adjustable further. the JRZ Triple Adjustable utilizes the same piston design while adding function to the Triple Adjustable canister. Like the Double Adjustable. the Triple Adjustable has a wide adjustment range with precise. even adjustments engineered to enable the chassis tuner to make significant. predictable changes every time.
Compression adjustments are separated into the high speed and low speed piston velocity ranges. This level of adjustment creates an environment for precise tuning. The mono tube Triple Adjustable Damper offers a wide adjustment range allowing the user to tailor the damper to driver. track and vehicle. The JRZ Triple Adjustable Damper is available as a complete kit with springs and mounting hardware. Custom applications are available.
An easy to use system. the Triple Adjustable Damper enables the chassis tuner to achieve the desired mass control and handling with precision. Digressive high speed compression blow off adjustment allows for a stiff compression valving while maintaining smooth response and without losing traction. The low speed adjustment is a powerful tool that enables the chassis tuner to maximize grip and optimize vehicle balance. The result is a damper that provides ultimate chassis and ride height control with maximum mechanical traction.
The JRZ standard large 22mm piston rod works in concert with the high speed valving to maximize blow off valve response. achieving solid chassis control without using a high spring rate. JRZ Triple Adjustable dampers are shipped with 360 degree swivel hoses and are available with zero-inclusion quick disconnects for mounting canisters within the chassis for ease of adjustment accessibility. Our proven piston has been developed to deliver a smooth and responsive damping characteristic. To customize track to tracks setups and tailor the chassis to the driver; the JRZ Triple Adjustable Damper has an adjustment range able to provide damping to spring configurations ranging from 1.5-6Hz on vehicles with moderate to large aerodynamic loads. Even with a large range. each adjustment is designed to be a small. even step giving precision and confidence when making changes.
Features- Large adjustment range
- 6 clicks low speed compression
- 14 clicks high speed compression
- 24 clicks rebound
- High response piston
- Precise canister
- Adjustable gas pressure
Benefits- Precise control of the chassis and unsprung masses
- Excellent tyre wear
- Easy to change configurations
- Professional racing mandating 3 way adjustment
- Experienced club racing
Learn More