Search results for 'cosworth stroker kit 2.6l'

For: Subaru WRX YR: 2002-2005 Cyl: 4 App: 2.0L 242mm (2600#)
The FX100 System uses the Power Plus I Pressure Plate with a custom heavy-duty Steel Back Organic friction disc. This clutch is engineered for heavy-duty street use. It is specifically designed for extended wear and additional clamping force for the enthusiast who has added an exhaust system, an intake system, up to 50hp NO2 upgrade, or other non-forced induction external bolt-ons. It features only slightly increased pedal pressure, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation. Learn More

The JRZ damper is an advanced development in high performance shock absorbers. The JRZ RS is a high gas pressure double adjustable twin tube damper. without the use of an external reservoir. Applying our race winning technology. JRZ designed the JRZ RS to give precise chassis control when driving on track and ultimate comfort for daily driving. Easy to install. the JRZ RS is available as a complete kit with mounting hardware and springs for all applications we support.  Following JRZ’s design philosophy. the JRZ RS has a large 22 mm diameter piston rod in strut applications and a 16 mm in aluminium damper applications. This means responsive chassis control at even the smallest suspension movements.  The large piston rod in combination with the high nitrogen gas pressure creates a lifting force giving great chassis control without using a high spring rate.  Our twin tube design uses a smaller diameter piston that gives a smooth feel during street driving. Working in conjunction with our blow off compression valving patterned from our racing dampers. the JRZ RS valving is the perfect marriage between daily driving and club racing.  To work with all ranges of spring and driver needs. the JRZ RS has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds.

Features

• 22mm piston rod
• Pre-set high gas pressure
• Piston developed for street and track
• Double adjustable
• 14 clicks compression
• 24 clicks rebound
• No canister
• Large adjustment range

These features culminate in the ultimate street and track damper. The JRZ RS is shipped as a bolt on kit with installation instructions and always comes with the personal service JRZ is known for.  Using the best materials. coatings and aerospace standard manufacturing processes; the JRZ RS is designed for long life. Unlike many clubsport dampers. the JRZ RS can be run for thousands of miles with no loss of performance or leakage.  Adjustment is easy to perform and comes with the knowledge basis only JRZ provides to its customers.

Benefits

• Easy installation
• Street ride. racing performance
• Long service life
• Applications available for prepared and stock class racing

Recommended applications

• Street/DE
• Club racing
• Prepared class racing

Learn More

The JRZ damper is an advanced development in high performance shock absorbers. The JRZ RS is a high gas pressure double adjustable twin tube damper. without the use of an external reservoir. Applying our race winning technology. JRZ designed the JRZ RS to give precise chassis control when driving on track and ultimate comfort for daily driving. Easy to install. the JRZ RS is available as a complete kit with mounting hardware and springs for all applications we support.  Following JRZ’s design philosophy. the JRZ RS has a large 22 mm diameter piston rod in strut applications and a 16 mm in aluminium damper applications. This means responsive chassis control at even the smallest suspension movements.  The large piston rod in combination with the high nitrogen gas pressure creates a lifting force giving great chassis control without using a high spring rate.  Our twin tube design uses a smaller diameter piston that gives a smooth feel during street driving. Working in conjunction with our blow off compression valving patterned from our racing dampers. the JRZ RS valving is the perfect marriage between daily driving and club racing.  To work with all ranges of spring and driver needs. the JRZ RS has an extra large adjustment range. With a few clicks you can turn your smooth street car into a crisp. rock solid track car in seconds.

Features

• 22mm piston rod
• Pre-set high gas pressure
• Piston developed for street and track
• Double adjustable
• 14 clicks compression
• 24 clicks rebound
• No canister
• Large adjustment range

These features culminate in the ultimate street and track damper. The JRZ RS is shipped as a bolt on kit with installation instructions and always comes with the personal service JRZ is known for.  Using the best materials. coatings and aerospace standard manufacturing processes; the JRZ RS is designed for long life. Unlike many clubsport dampers. the JRZ RS can be run for thousands of miles with no loss of performance or leakage.  Adjustment is easy to perform and comes with the knowledge basis only JRZ provides to its customers.

Benefits

• Easy installation
• Street ride. racing performance
• Long service life
• Applications available for prepared and stock class racing

Recommended applications

• Street/DE
• Club racing
• Prepared class racing

Learn More

For: Subaru WRX Sti YR: 2004-2011 Cyl: 4 App: 2.5L Turbo 6-SHPeed
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles.  Learn More

Cosworth Ultra Race Valve Spring Kits engineered use in situations that require valve control in extreme condits. Each consists of dual valve springs with matched lightweight titanium retainers; keepers; hardened steel springs seats. Cosworth Ultra Race Valve Springs wound from highest quality chrome silicone steel with chamfered ends are heat treated stress relieved long term reliability. Ultra Race Valve Spring kits compatible with Cosworth high performance valves. Learn More

Manufactured in UK; Cosworth brake pads feature a 1.5mm granulated inter-layer which only serves to as a shock absorber; helping to reduce stress on rotor surface triples bonding strength; diminishing edge lifting. To reduce bedding-in or seating-in time this is time it takes the and disc to adapt to each other Cosworth brake pads heat seared. This process heats friction material in excess of degrees toasting surface; greatly enhancing performance first time that driver applies brakes. Scorching pads also significantly reduces initial fading fading increases necessary force pressure required to maintain deceleration of vehicle. Cosworths brake range offers exceptional performance without compromise.
Specs:
Superior bite from cold
Silent running technology
Fade resistant
Premium grade friction material
Consistent & predictable braking patterns
Medium-hard sports suitable heavy duty/fast road
ECE approval
Superior bite Mu friction coefficient virtually from first pedal
Strong brake effect up to degrees C
Chamfered edge to avoid lifting
Fitted with premium quality shim hardware silent braking
Durability factor with minimal rotor abrasion
Produces consistent; predictable braking performance Learn More

COMPETITION CLUTCH
Stage 4 Rigid - Strip Series 0620 Clutch Kit

This assembly; available with a six puck rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300 mile break-in recommended with this set-up.

The 0620 Series kit includes a performance pressure plate; a six puck high torque rigid disc with Ceramic buttons; all applicable bearings; and the appropriate alignment tool.

Learn More

Cosworth High Performance Head Gaskets engineered to seal in power under most demanding condits. Constructed from stainless steel with a folded stopper layer; each application features superior sealing compared to conventional multi layer steel gaskets. Additionally; Cosworth High Performance Head Gaskets manufactured from pre-coated cut stainless steel resulting in uniform coating distribution consistent shape.
Key Features
Individual cut layers of stainless steel with superior consistency compared to laser gaskets
Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or areas
Manufacturing dimensional tolerance of 0.001
Die manufacturing process ensures smooth edges; unlike laser gaskets
Cosworth's gaskets feature a folded stopper layer additional torque around each cylinder. width of sealing area is specific each application thereby providing ultimate sealing properties
Available in a range of thicknesses specific applications Learn More

For over 40 years; Cosworth's been leader in innovative multi valve cylinder head design both racing high performance production cars. Cosworth Ported Valve Cylinder head range is latest advancement. Modified from OE cylinder head castings; substantial flow improvements upgraded valve train components offer superior performance your high performance engine.
Each original cylinder head design is carefully evaluated tested to establish improvements required to meet target performance level. Hours of testing flow bench validation used to determine best advanced port design yielding maximum usable power response. However; there is more to cylinder head design than just maximum flow. It is critical that port velocits maintained to ensure drivability valve train components matched to guarantee reliable performance. Once of these factors have been tested validated; final port contour is digitized. Using digitized program; we then reshape both intake exhaust ports using axis mill producing an accurate consistent port shape every time. In addition to reshaping enlarging intake exhaust ports; most Valve Cylinder heads feature a re-shaped combustion chamber to un-shroud valves increasing flow performance. After machining; each cylinder head receives a multiangle high performance valve on precision valve seat cutter. Then each cylinder head is ultrasonically; cleaned; serialized then hand assembled with select high performance valve train components; ready to install on your engine.
Key Features
All OE Castings
Enlarged Intake Exhaust ports
Large diameter stainless steel intake valves
Large diameter Inconel exhaust valves
Hi Rev; Dual valve springs
Titanium Retainers
Hardened Steel spring platforms
Reshaped combustion chamber on most applications
Flow bench proven design
Dyno tested
Machined Cosworth Logo
Precision Multi angle valve job
Pre-assembled; ready to install
Machined port bore finish
Knife edge port divider Learn More