Search results for 'brake it'
-
$521.00COMPETITION CLUTCH
Stage 5 Sprung - Strip Series 1420 Clutch KitThis assembly; available with a double spring; six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1420 Series kit includes a performance pressure plate; a four puck high torque sprung disc Ceramic buttons; all applicable bearings; and the appropriate alignment tool.
Learn More -
$228.99- Designed to Increase HP and Acceleration
- Engineered to Specific Vehicle Design
- Easy to Install. Usually in 90 minutes or less!
- Lasts up to 100.000 Miles Before Service is Required (depending on driving conditions)
- Million Mile Limited Warranty
- Replaces OEM Filter and Air Box
- Air Filter is Washable and Reusable
- Works with Original Equipment Manufacturer Computer Systems
- Street legal in most states (not street legal in CA – Check part number or vehicle listing for specific CARB status)
HORSEPOWER YOU CAN FEEL
As with all our kits. when you bolt-on a 57i intake. you will notice the difference the next time you drive your vehicle. Our 57i Gen I Intake Kits are a great way and in many cases the only way to maximize airflow and engine performance. They will replace the factory air box providing both High-Flow air filter technology and a larger air filter size. This winning combination will increase horsepower and sound great too.
BREAK OUT OF THE FACTORY AIR BOX
57i Series Intake Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. Gen I’s take advantage of the added airflow provided by an oversized air filter released from the restrictive factory air box..
TECH TALK
These kits bring engine airflow out of the factory box by providing a large size open-air conical or round High-Flow Air Filter. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100.000 miles). The filter is then either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel. aluminum. silicon or reinforced nylon and ensure long life.
57i Intakes are not legal for use in California and other US States adopting California emission standards.
57i Intake Kit
Engine :-
Aspiration :- T
Vehicle Engine Options :- EJ255.EJ257
Vehicle Interior Options :- H4 Aspiration: T
Vehicle Exterior Options :- Fuel: FI-GAS
Cylinder Type :-
Vehicle Options :- Learn More -
$515.00For: Subaru Impreza RS YR: 1996-2005 Cyl: 4 App: 2.5L
The FX100 System uses the Power Plus I Pressure Plate with a custom heavy-duty Steel Back Organic friction disc. This clutch is engineered for heavy-duty street use. It is specifically designed for extended wear and additional clamping force for the enthusiast who has added an exhaust system, an intake system, up to 50hp NO2 upgrade, or other non-forced induction external bolt-ons. It features only slightly increased pedal pressure, longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation. Learn More -
$737.00The Cosworth Tumble Generating Valve (TGV) Delete is designed to maximize airflow to your engine by eliminating obstructions inherent to OEM intake ports. TGV deletes made of a fiber reinforced polymer to insulate cylinder head from intake tract; providing your engine with a cooler; denser charge of air. To further increase performance; Cosworth deletes port matched to CNC cylinder heads intake manifold. This product is a direct for 07+ Subaru due to top feed injector design due to a revision to upper bolt pattern of TGV; specifically moving center M6 holes. With manifold top feed injectors; TGV delete will work without issue on most WRX/STI applications. Learn More -
$615.00For: Subaru Impreza RS YR: 1993-1994 Cyl: 4 App: 1.8L 2WD
The FX400 System uses the Power Plus I Pressure Plate with a custom, extremely durable, Sprung Ceramic disc. This is the ultimate extreme duty street and/or road/drag racing system. It is available in a 4,6 or 8 wing (paddle) configuration, with the 4-wing being the more aggressive setup and 8-wing being the less aggressive (please specify which type you prefer). The sprung hub design allows for moderate dampening in high-torque applications, rendering it much more street friendly than solid or rigid designs. This disc is designed for outstanding holding capacity, and rapid heat dissipation. The FX400 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that may not be ideal for street driven vehicles. Learn More -
$1,900.00Front mounted intercoolers offer improved performance potential Subaru applications. Cosworth front mounted intercooler system the replaces restrictive; heat-soak prone original core. engineered system features an efficient large aluminum core with mandrel bent aluminum tubing maximum performance up to exceeding 600hp.The intercooler core is rubber mounted on a secure bracket system to help eliminate cracking breakage. Installation is simplified as no cutting of vehicle is required. />Features
Large efficient core in anodized black finish subtle appearance.
Large diameter mandrel bent aluminum tubing with fine texture gray powder coated finish.
4-ply heavy duty silicone coupling hoses.
Isolated mounting system.
Liner hose clamps.
No cutting or trimming of vehicle body required.
Comprehensive instruction manual.
Robust intercooler core mounting system Learn More -
$515.00For: Subaru Impreza RS YR: 1996-1997 Cyl: 4 App: 1.8L / 2.2L
The versatile FX500 System uses either the Power Plus I or Power Plus II Pressure Plate along with a solid center 4,6 or 8 wing (paddle) Ceramic Button disc. The FX500 disc is designed for outstanding holding capacity and rapid heat dissipation. The FX500 ceramic paddle design creates a quick and rapid engagement as well as clutch chatter that is not recommended for the street. Learn More -
$2,375.00Cosworth stroker kits the perfect to displacement; torque power to your engine. Each includes select matched components from parts list ensuring reliable performance.
Mitsubishi 4B11 (Evolution X) 2.2L
Cosworth Forged Pistons (86mm)
Cosworth Fully Counterweighted Billet Crankshaft (94mm)
Cosworth Forged Connecting Rods
Cosworth'ston Rings
Mitsubishi 4G63 (Evolution VII-IX) 2.2L
Cosworth Forged Pistons (86mm)
Cosworth Fully Counterweighted Billet Crankshaft
(94mm)
Forged Cosworth Connecting Rods
Cosworth and Main Bearings
Cosworth'ston Rings
Subaru EJ25 2.6L
Cosworth Forged Pistons (99.5mm)
Cosworth Fully Counterweighted Billet Crankshaft
(81mm)
Forged Cosworth Connecting Rods
Cosworth and Main Bearings
Cosworth'ston Rings Learn More -
$3,800.00Increased engine performance often means increased engine speed load. Original factory crankshafts not be able to withstand added stress; resulting in catastrophic failure. Cosworth billet crankshafts machined from ultra strong EN40B steel; engineered to endure harshest condits have been tested to withstand over 1;000HP.
Key Features
Superior lubrication
Profiled counterweights
High strength
Light weight Learn More -
$750.00Todays sophisticated tuners want it all; and GReddys SE exhaust systems deliver the full spectrum of features desired in a street performance system. SE exhausts increase flow via tuned piping and larger; free-flowing mufflers for improved power; but provide discreet sound levels that wont attract the wrong kind of attention. The exhaust note is comfortable and sporty; not loud. Each application is tested and tuned for USA spec. vehicle'so fitment and sound is confirmed. All SE Exhaust are test to be well below the 95dBA standard. Our new smaller Spectrum exhaust tip(s) help disguise the system from the rear of the vehicle; but reveal show-quality appearance from the side and underneath. Whether you are cruising down the road or at wide-open throttle down the track; the Spectrum Elits ready. Refined sound. Hard-hitting power. Superb looks. Excellent fitment. GReddy quality. A true Sports Exhaust. Learn More